Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

How to Improve Your Old Car's Performance - Part 1/3

The Smoking Tire gets all scientific in this episode, trying to discover exactly how much power can be unlocked from an old car simply by performing routine maintenance.


 


More Videos...


How to Improve Your Old Car's Performance - Part 2/3
The Smoking Tire gets down and dirty on their Jetta Project Car, trying to improve the car's performance with just a factory service, performed at home by Matt Farah, a first time mechanic.





Fast and The Furious - The Rejected cars and Scenes
Matt Farah sits down with Craig Lieberman, longtime friend of the show and Technical Director for the first 3 Fast and the Furious movies to share rejected scripts and car ideas.





Air Suspension - Can You Really Have it All?
In the past I've thought of air suspension as a modification reserved for trucks, low riders, and show cars. But what about sports cars? Is it possible to have the look you want at a show, the handling you want at the limit, and the practicality of clearing speed bumps and driveways? The guys from Accuair Suspensions say there is, so we put their Audi S4 to the test.





Can a Nissan Versa beat a Corvette?
Matt always buys impractical cars and tries to justify them as practical, even though they are far from it. Dan makes him put his money where his mouth is by holding a practicality challenge against the most practical car in the US: a base Nissan Versa.





Dumb Things NOT To Do To Your Car
Scotty Kilmer, mechanic for the last 46 years, shows some of the dumb things he's seen people do to their cars. And, If you like my car help, be sure to watch my live car talk show every Saturday morning at 10 AM CST on YouTube. I answer your car questions LIVE there. Just check it out at https://www.youtube.com/watch?v=VognjkYaMjg&list=UUuxpxCCevIlF-k-K5YU8XPA&f eature=c4-overview . And remember, every TUESDAY I upload a new video, so don't miss them.





Free Performance Upgrade, Help Increase Your MPG, Indexing Spark Plugs
In this video I show you how to index your spark plugs which gives you a small performance increase, and also helps Boost your gas mileage. Click here to show thanks, and help support Fixbook: http://www.hondahowto.com/p/blog-page_25.html Click this link to Subscribe: http://www.youtube.com/subscription_center?add_user=Hondahowto1&annotation_ id=annotation_59253&feature=iv&src_vid=QSNjtNYuD18 Click here to check out the the "Car Runs on 2 cylinders" series: https://www.youtube.com/playlist?list=PLoA1-alJGwfnWZvOZtIjPnQX88q1n3GWA&fe ature=view_all I, Jordan, assume no liability for anything you choose to do to your car, before, or after watching one of my videos, including this one. All DIY repairs, or modifications, you perform to your car are made at your own risk. Sometimes, even if you've done everything the right way, you can destroy, or damage, a piece, or part. You must understand this; part of doing a repair, and/or modification is messing up sometimes. Also, if for some reason, I do give incorrect instructions, and something breaks because you followed my instructions, I still will not reimburse, or pay, in any way, for whatever cost that may be incurred due to following my wrong instructions. Don't do anything to your car unless you yourself feel comfortable, & confident in doing so. Fixbook DIY Car Repair





$0.00 Performance Upgrade - EricTheCarGuy
$0.00 Performance Upgrade - EricTheCarGuy http://www.ericthecarguy.com/ Yea, it's true something as simple as this can increase performance, just make sure you don't get it too tight and have fun impressing your friends with this cool little trick. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





Solving Engine Performance Issues (Part 1) - EricTheCarGuy
Visit me at: http://www.ericthecarguy.com/ See Part 2 http://www.youtube.com/watch?v=sAKwCzUE_9M Vacuum leaks http://www.youtube.com/watch?v=9CPqbaSgcok+ Voltage leaks http://www.youtube.com/watch?v=x-U9WqJfaJs Power Balance http://www.youtube.com/watch?v=bAOmUjAjNjE Compression testing http://www.youtube.com/watch?v=X_tbksFYhl4 Leak down testing http://www.youtube.com/watch?v=WgrfT0LFMhc&feature=relmfu I get a lot of questions via email and over at the forum about the steps to take when you encounter a performance issue like my Subaru's hesitation issue and I often feel like I sound like a broken record when I cover the basic steps that I cover when encountering a situation like that. My main point here is that if you have a performance problem and you're going to throw parts at the problem start with the basics before you to off and start replacing sensors that you suspect are a problem, if you don't have evidence of a faulty sensor then don't start there start with the simple tune up items and check for vacuum leaks and air leaks as I've shown here and I believe you'll have better results and save yourself some money in the process. In short the rule of KISS applies, Keep It Simple Stupid. If you have questions about your own engine performance issues head over to my website and either ask the search function or ask the forum, we'd be happy to help. http://www.ericthecarguy.com/forum/default.aspx --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





How To Quickly Check A Used Car For Purchase
Scotty Kilmer, mechanic for the last 46 years, shows how you can quickly check out a used car BEFORE you buy a potential lemon. And, If you like my car help, be sure to watch my live car talk show every Saturday morning at 10 AM CST on YouTube. I answer your car questions LIVE there. Just check it out at https://www.youtube.com/watch?v=VognjkYaMjg&list=UUuxpxCCevIlF-k-K5YU8XPA&f eature=c4-overview . And remember, every TUESDAY I upload a new video, so don't miss them.





How to Diagnose A Bad Clutch - EricTheCarGuy
Link to clutch replacement video for this car. http://www.ericthecarguy.com/vmanuals/vm/2002-ford-focus-clutch-replacement -vmanual Visit me at: http://www.ericthecarguy.com This one will end up being part of a larger series of videos about clutches and their diagnosis and replacement, I'm even going to post a video on 'How To Drive A Stick Shift' as part of this series. So in this installment I cover the basic steps in determining if you NEED a clutch or not. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





How to Turbo - Part 1
After buying a Euro car last episode, Marty discovers he has not yet found his perfect vehicle... In this extended episode, we reveal what he got, and show how to make it faster. Wanna show the world that you fix your own shizzle? MCM stickers, ti shirts and other mad shizuoika available here: http://www.mightycarmods.com/collections/all Official Site: http://www.mightycarmods.com Forum: http://forums.mightycarmods.com Music from the episode is available here: http://www.mightycarmods.com/collections/music (Forced Induction by MOOG was featured in this episode) Also something to note around Mighty Car Mods: we are normal guys and are not trained mechanics. We like to make interesting car mods and show you how we've gone about it, but we can't promise that anything we show you will work for your particular car, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen us make it look so easy. Talk to a qualified mechanic if you are in any doubt.





How to Polish a Black Car
http://www.refinishnetwork.com/car-painting-how-to/itemlist/tag/polishing The Products used in this Video are 3M Rubbing / Cutting Compound (step 1 on white pad) 3M Swirl Mark Remover (step 2 on black pad) 3M Ultrafina (step 3 on blue pad) This how to on polishing a black car can be applied to any color. This is a thorough polishing job that is most noticeable on a black or dark finish and illustrates all steps on how to polish. The 3m Polishing system is used in this video but many others are just as effective.





How To Find Suspension Noises 101 - EricTheCarGuy
How To Find Suspension Noises 101 - EricTheCarGuy http://www.ericthecarguy.com/ This is probably one of the most popular questions that I get so I'm happy to bring you this one because I know it's going to save me some typing. I may have missed a couple of things but I believe I've covered the basics on this one so this video should give you more than enough to start with. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





Dissecting an Engine, The Basic Parts and Their Functions - EricTheCarGuy
Dissecting an Engine, The Basic Parts and Their Function - EricTheCarGuy http://www.ericthecarguy.com/ I've had more than one request for this and since I had a few hours while sitting on my butt waiting for my Dodge engine to show up I thought I would fill the time by making this video for you. I have to say that after the first edit I wasn't too happy and went back and reshot not once but twice and even then I still felt I didn't cover it the way I liked. I should really start scripting these videos, it would make my life soo much easier. Anyway don't be too rough on me if you have differing opinions as I'm willing to accept them in the comments if you are nice about it but if your going to tear me a new one then please make a video of your own explaining why as at least then we will be on the same playing field. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





Audi R8 4.2 Supercharged, Faster than V10 FSI? On Track Test
The Smoking Tire takes to the track in the baddest R8 yet, Project Raptor by Performance Outfitters and PES Tuning. Host Matt Farah puts the Raptor through its paces at New Jersey Motorsports Park to find out if a Supercharger makes for a faster car than a couple of extra cylinders.





Which car is faster? Which Car is Faster?




Similar 1/4 mile timeslips to browse:

2006 Mazda 3 : 10.150 @ 134.000
Vincent Tiaga, Engine: Mazda I4, Supercharger: na Turbos: na Tires: M&H


2005 Mazda 3 SP23: 11.659 @ 128.790
Kurt Scott, Engine: 2.3L, Supercharger: N/A Turbos: GT3582


2008 Mazda 3 mazdaspeed3: 11.682 @ 117.170
NJSPEED3, Engine: 2.3L mzr/disi , Turbos: T3 HTA3586 .82ar


2008 Mazda 3 MPS: 12.350 @ 119.830
RE-ACTIONENGSPEED3, Engine: mzr, Turbos: k4 hybrid


2009 Mazda 3 Speed3: 12.737 @ 108.510
Daniel Lalonde, Engine: mzrdisi 2,3, Turbos: k04 Tires: Toyo RA1 235/40/17@16psi


2008 Mazda 3 Mazdaspeed 3: 12.793 @ 106.900
driver311, Tires: m@h 24.5x8.5x15 inch slicks


2007 Mazda 3 Mazdaspeed: 12.847 @ 111.635
Dave, Engine: 2.3L MRZ DISI TURBO, Turbos: stock Tires: pontenza


2007 Mazda 3 Mazdaspeed 3: 12.906 @ 111.140
Laloosh, Tires: STREET


2013 Mazda 3 MAZDASPEED 3: 12.988 @ 107.850
Michael Vincent Sarricchio, Engine: MZR DISI, Turbos: STOCK K04 Tires: FACTORY TIRE


2007 Mazda 3 Speed3: 13.190 @ 110.670
Kyle Hasenheyer, Engine: Stock engine, Turbos: Stock K04 turbo Tires: Venezia Crusade HP


2010 Mazda 3 Mazdaspeed 3: 13.264 @ 108.230
Jimmy, Engine: Stock, Supercharger: NA Turbos: Stock Tires: G-force T/A KDW 2's


2008 Mazda 3 Mazdaspeed3 Grand Touring: 13.330 @ 107.980
James Rondepierre, Engine: 2.3L Direct Injected, Turbocharged, Intercooled, Supercharger: N/A Turbos: K04 STOCK Tires: HANKOOK VENTUS V12 EVO (STREET TIRES) (25PSI)


2007 Mazda 3 MazdaSpeed 3: 13.394 @ 104.330
Brandon,


2010 Mazda 3 Mazdaspeed 3: 13.485 @ 108.840
Michael Loopy, Engine: 2.3 litre, Turbos: Stock K04


2007 Mazda 3 Mazdaspeed3 GT: 13.488 @ 103.220
Matt, Engine: 2.3 MZR turbo, Supercharger: n/a Turbos: stock Tires: 245/50/16 Nitto NT555 Extreme Drag's for track onl


2008 Mazda 3 mazdaspeed3: 13.555 @ 103.430
mike speed, Engine: stock, Turbos: stock Tires: winter tire front


2008 Mazda 3 Mazdaspeed 3: 13.565 @ 104.700
Darryn Nine, Engine: 2.3L Turbo, Turbos: Stock K04 Tires: 225/45/18 Achilles ATR Sport


2011 Mazda 3 Mazdaspeed: 13.572 @ 106.990
Justin, Engine: 2.3 DISI, Turbos: K04


2009 Mazda 3 Speed 3: 13.714 @ 102.430
zack, Engine: intake, BOV, Supercharger: n/a Turbos: stock Tires: stock


2008 Mazda 3 Mazdaspeed3: 13.736 @ 102.340
BLKSp33d3, Engine: 2.3L DISI Turbo, Turbos: Stock KO4


 


©2014 DragTimes - Disclaimer