EPIC DRIFTING FAIL COMPILATION!! # 2013
The first part of the drifting fails. Hope you guys enjoy!
So make sure you hit that subscribe button to never miss a video! Why not?
If your Video is in this Compilation please contact me to be credited for
it or have your part removed, thank you.
How To Replace CV Boots - EricTheCarGuy
How To Replace CV Boots - EricTheCarGuy
This one is a request from more than one person so I'm happy to bring it to
you. As I said in the video I personally don't see much point of replacing
just the CV boots anymore as it just makes more sense to replace the axle,
that's just how I feel however. If you do want to replace the boots I hope
this video will help.
Click below and Stay Dirty
Visit me at EricTheCarGuy.com
Visit EricTheCarGuy Forum
Visit my Facebook Page:
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee
against unauthorized modifications of this information, or improper use of
this information. EricTheCarGuy assumes no liability for property damage
or injury incurred as a result of any of the information contained in this
video. EricTheCarGuy recommends safe practices when working with power
tools, automotive lifts, lifting tools, jack stands, electrical equipment,
blunt instruments, chemicals, lubricants, or any other tools or equipment
seen or implied in this video. Due to factors beyond the control of
EricTheCarGuy, no information contained in this video shall create any
express or implied warranty or guarantee of any particular result. Any
injury, damage or loss that may result from improper use of these tools,
equipment, or the information contained in this video is the sole
responsibility of the user and not EricTheCarGuy.
Wheel Bearing Replacement with Basic Hand Tools
Front wheel bearing replacement on a 2002 Buick LeSabre with basic hand
tools. Please note, this vehicle has the bearing built into the hub. Some
vehicles may have a taper rolling bearing (usually older vehicles have this
setup) or some vehicles may need the bearing to be pressed out of the hub.
In this case, the hub & bearing is all one unit. Don't forget to wear
This video is being performed by an experienced tech. Any attempt to repair
automotive parts and/or systems carries risk of personal injury. Always
adhere and follow safe practices when working on vehicles. Such as, use
safety glasses, jack stands, no loose clothing, etc. No guarantee or
warranty is implied. Use the information in this video at your own risk.
How To Remove a C-Clip Axle Shaft
In this video I'll show you how to remove a c-clip style axle shaft. In
this particular video we are working on a rear dana 35c from a Jeep
Cherokee. But many rear C-clip axles will be very similar if not exactly
Share your videos and earn $$$$ here: http://bleepinjeep.com/submit-vids
Need To buy Parts? Get them cheaper Here:
Offroad Parks: http://bleepinjeep.com/offroad-parks
Tee Store: http://bleepinjeep.com/store
Coupon Codes: http://bleepinjeep.com/discounts
Click here to License this video: http://bleepinjeep.com/licensevideo
*Disclaimer - This product is meant for entertainment purposes only. Your
mileage may vary. Do not try this at home. Void where prohibited. Some
assembly required. For off-road use only. Slippery when wet. Batteries
not included. Do not use while operating a motor vehicle, heavy
equipment, cherokee, wrangler, or any jeep vehicle. May be too intense for
some viewers and children under 30 years of age. Please remain seated
until the ride has come to a complete stop. Studies have shown viewing
these videos causes increased cancer risks in laboratory test people. I am
not a professional, I have no training, I'm not even particularly good at
horse whispering. Don't believe everything that you know. Please keep
your hands in the vehicle at all times. Do not tap on glass. Do not eat
anything that has been on the floor for more than 3 days. Keep your hands
to yourself. Not to be taken internally. Reproduction strictly
prohibited. Driver does not carry cash. Objects in jeep mirrors may be
farther than they appear.*
Driveshaft 103 - Replacing carrier bearings
This is the easy stage of the job. Pulling and replacing carrier bearings
is actually fun, too. You get to rip them to pieces with little risk of
personal injury. If they've been rattling your teeth out for a while,
you're going to enjoy getting even with them.
So many people are scared of the Lobro joint, but I assure you, unless you
couldn't build anything out of Lego's as a child, you're not going to have
any trouble with it. It's an amazingly simple part held in with 6 bolts, a
clamp, and a snap ring. If it comes apart, so long as you know where
everything goes, it will go back together. Don't worry.
This video shows you how to replace carrier bearings whether your Lobro
joint is healthy or not.
FWD Wheel Hub Bearing Remove Press Install VW Golf HIGH DETAIL
Visit Amazon.com to get a tool like this.
FWD Wheel Hub Bearing Remove Press Install VW Golf. Subject vehicle is a
2006 Volkwagon Golf 2.0.
Public Gymkhana - Front Wheel Drive Drifting - Grodno city, not Ken Block.
Like me on Facebook http://www.facebook.com/MisterSmellyMonkey
Grodno City drift, in a 2litre Diesel Avensis.
This is a Remix video of one already on YouTube by user s530015 who gave me
permission to do this.
Original link here : http://youtu.be/U5RQQ-e4C1g
Music is XXIII by Paranoid Breaks, I changed it slightly, but check out
their soundcloud page here : http://soundcloud.com/paranoidbreaks
How to repair peugeot 206 axel part 1.divx
repair axel peugeot 206 gasoline model axel bearings worn bearings peugeot
106 , 205, 309 ,405, 406, citeron berlingo, peugeot partner, van same
operation, axel repair
Changing a U Joint, or Universal Joint, in a Drive Shaft
Changing a U Joint, or universal Joint, in a Drive Shaft. I wanted to make
this video so I could show what I think are important steps in changing a U
Joint or Universal Joint in a Drive Shaft.The Ball Joint Press can be
borrowed from many Auto Parts Stores or cheaply got at Harbor Freight. .A U
Joint or Universal joint is commonly found in rear wheel and four wheel
drive vehicles.After removing a drive shaft from the vehicle ,You will want
to remove any grease fittings and the U Joint or universal Joint retaining
clips. Then I use a Ball Joint press to remove the U joint After removing
the U Joint or Universal joint you need to clean up the yoke that the
universal joint just came from. Compare the old U Joint with the new U
joint to be sure you have the right one. I then press the new U Joint in
with the Ball Joint Press.. I install one cap and push it most of the way
through ,so the cross sticks out enough to put the other cap on. Also
remember if You need to take apart a two piece Drive shaft then it needs to
be timed when slid back together.
Street Race - Chevy Nova and Honda
I went to the street races on Saturday. It was a good day overall. We got
just under 10 passes (some people were racing towards us) before the cops
came and eveyone disappeared.
There was even a Honda Odyssey Minivan running it! It lost by half a car to
the Cadillac CTS: Both were stock. Sorry for the video quality. It was
recorded on my iPhone.
How to: Lock a Trans-axle or Differential
A Detailed step-by-step tutorial on locking lawn mower differential. This
is the method I have used for years and it has never failed me. Welding is
***DISCLAIMER*** I am not responsible if you destroy your gearbox!
DO THIS AT YOUR OWN RISK!
Like me on Facebook!
P.O. Box 73