Axial Wraith VXL boggin at Crawler World Oct 26, 2011
Backyard TTC course
Mudpit revised with 100lbs of clay
120mm Hot Racing shocks
Traxxas VXL-3s system(motor/esc)
Normal gearing 16/87 48pitch
Hot Racing knuckles and c-hubs
Hot Racing 120mm shocks
Toward Pro MG946R servo @ 7.2 volts
Kimbrough 1/4 scale servo saver(black) or Traxxas "large" saver (white)
Robinson Racing transmission gears
Axial 43/13 HD differential gears
RC4WD frt diff cover
Vanquish rear diff cover
Custom shock mounts and upper tie bars
Custom straight links, 8/32 mild steel all-thread w/6mm brakeline, Traxxas
Custom length 4 link bars approx 5mm shorter front, 10mm shorter rear
Custom 4 bend steering link using the XR side of knuckles and lovin' the
Custom aluminum axle toobz
Custom aluminum body with integrated inner fenders and 2 piece aluminum
Custom tonneau cover made from wax coated paper, under coat, and gloss
JB Welded or epoxied Axial HD lockers, currently looking at solutions for
the weak stock lockers
May be seen running an HPI open front differential with silicone diff
Modified stock driveshafts, dual females w/aluminum inner tube
Stock plastic rear axle lock outs
Stock dog bones
Battery in rear, 5000mah 2S or 4000mah 3S
Weighs approx 8lbs with the CAC's @7.5lbs with the Hammers
Trail set - CAC EZ locks w/Super Swampers, memory foam, no vent holes, no
weight added, approx 8oz each total, installed with the "narrow" offset
11.5" from edge to edge.
Crawl set - Axial 8 holes wheels with half spun hex mod :D Super Swampers,
no foams, sealed with airsoft pellets, fronts weigh approx 12oz and the
Speed set - RPM Revolvers, crawler wide offset with Proline Hammers and
memory foam, 7oz fronts and 6.2oz rears.
Scale Rc Tandem Axle Gooseneck Trailer
custom buillt trailer by scale innovations..sponsored by gentlemen inc.ca
used to pull my rally car to the track or my street car to the strip even
my drifters need to hauled to the track from time to time...not to mention
a buddy truck when he breaks down..lol..check it out!
9 Trucks RC Mudding Trail at Chestnut Ave Defender D90 Axial Wraith 6x6 King Hauler Man Honcho
The Rigs: 5x Land Rover Defender D90, Axial Wraith, 6x6 King Hauler, Man
Truck, SCX10 Honcho
9 Trucks Trailing at Chestnut Ave on 25 Mar 2012
We went swimming and mudding!! A few of us went fully submerged (again) :D
Mud and water is really something essential in every trail... without mud
and water, trails wouldn't be as fun. :)
Thanks for watching!
Add us on facebook http://facebook.com/SGCrawlers
Visit us at http://SGCrawlers.co.nr and http://MyHoncho.blogspot.com
for more info and videos.
Keep RC-ing bros!! :)
Custom RC Trucks - Tamiya Ford F350 4X4 High Lift Rock Crawler
UPDATE 12/20/2014 - Black and Yellow has been sold and now resides
somewhere in Canada. I sold absolutely everything else RC I owned to a guy
in Indonesia through RC Crawler dot com where I am still a member and go by
You can view my 1/10 scale utility trailer and slide-in camper build I did
You can view my 1/10 one ton Toyota, a.k.a. OTTER, here:
There's tons of detail in both of those above mentioned builds as well.
You won't be disappointed.
I want to thank everyone for all the great comments past, present, and
future. However, I will delete any comments with profanity. This is a
family friendly page, so please keep it clean.
I see a lot of the same questions asked recently as was a couple of years
ago. Go to the beginning of the comments, where I was answering most of
the questions asked, and read through those and you will probably find your
Good luck in your build and I hope I was able to inspire an idea for it.
Or, maybe at least you enjoyed watching my video.
BTW, for all the purists out there, I put the Hemi in the F350 because it's
all I could find at the time. If there was a Triton V10 or Powerstroke
scale engine available I would have definitely put that in instead. So,
take a deep breath and understand that it's just an RC truck.
Best Rc Pulling Video
some of the coolest rc tractor pullers i could find including one with a
mini jet engine in it. Sure is fun watching watching these little pullers.
Thanks for watching and please Comment, Rate, Subscribe! it really helps
Thank You :)
wcm pro stock 1/4 scale test run
1/4 scale Pro Stock custom built with 90cc Solo motor and quick change rear
end, this was the first few runs down the track before making some
changes.. Keep your eyes out for our next few videos running this car on Nitrous.