More Videos...

2012 Camaro ZL1 Takes on Nurburgring | Chevrolet
Watch as the 580-horsepower Camaro ZL1 carves up Nurburgring in 7:41.27 - bringing the Camaro neck and neck with the Porsche 911 turbo S and Lamborghini Murciélago lap times. The Camaro ZL1 used for the lap was a production-intent model, with no performance modifications, driven by Camaro Performance Engineer Aaron Link.

Chevy Camaro ZL1 | Phase Three: 24-hour Track Endurance
The Camaro ZL1 makes 24 hours of cumulative, rigorous testing look like pie. Watch as engineers put it through the gauntlet for showroom-to-track readiness. How bad do you want one now? http://spr.ly/ZL1

2012 Corvette ZR1 Takes on Nurburgring
The Chevrolet Corvette returns to the famed German track - the Nurburgring - to test the 2012 ZR1 model. This year's test run eclipses the time set in 2008 by more than six seconds.

Welcome to the 11-second Club | Camaro ZL1 | Chevrolet
The 2012 Chevrolet Camaro ZL1 is officially in the "11-second" club, as engineers recently turned an 11.93-second/116-mph quarter-mile elapsed time run in a showroom-stock Camaro ZL1 automatic. A Camaro ZL1 manual ran an 11.96-second ET at 117 mph. For more on the Camaro ZL1: http://www.chevrolet.com/Camaro-zl1-sports-car/

Wide body Camaro SS launch
Wide body Camaro SS

2012 Chevrolet Camaro ZL1 Coupe Exterior Scenes
2012 Camaro ZL1 Features Technically Advanced 6.2L Supercharged V-8 CHICAGO -- The all-new, 2012 Chevrolet Camaro ZL1 is powered by the LSA 6.2L supercharged V-8 engine that produces an estimated 550 horsepower (410 kW) and 550 lb.-ft. of torque (745 Nm). The LSA is the most powerful engine ever offered in a Camaro, eclipsing even the original ZL1 engine from 1969 that inspired the name of the new, maximum-performance model. Built on GM's legendary small-block V-8 architecture, it features an intercooled Supercharger system, premium heat-resistant aluminum cylinder heads and other details designed to ensure its exceptional performance is delivered with smoothness and refinement. "The LSA is the ultimate engine for the ultimate Camaro," said John Rydzewski, assistant chief engineer for small-block engines. "It has a broad power band that matches the Camaro ZL1's performance capabilities at every notch on the tachometer." Components and design elements that contribute to the LSA's performance include: ■Balanced, lightweight reciprocating assembly ■High-strength hypereutectic pistons ■Sixth-generation Eaton Supercharger with four-lobe rotors ■Center-feed fuel system ■Piston oil squirters. A Tremec TR6060 six-speed manual transmission is matched with the LSA. It uses a 240-mm dual-mass flywheel matched with a 240-mm twin-disc clutch system to provide excellent shift smoothness. Compared to the Cadillac application, the LSA used in the Camaro features the following unique components and details: ■Black Intercooler housing with unique heat exchanger and plumbing to accommodate the Camaro engine compartment ■Cast stainless steel Exhaust manifolds for enhanced thermal management ■Camaro-specific oil pan ■Revised accessory drive with unique alternator and air conditioning compressor ■Idler pulley in place of the conventional power steering pump pulley, because of the use of electric power steering ■Special engine cover in red. Supercharged power delivery The LSA engine's sixth-generation Eaton Supercharger, with high-helix, four-lobe rotors, enables a broad range of power through the rpm band, giving the engine great low-end torque and excellent horsepower at higher rpm. "The design of the Supercharger's rotating internal components extends its effective range, giving the engine a wide, flat power band that is usable at all rpm levels," said Rydzewski, assistant chief engineer. "Whether at low speeds or on the highway, the feeling of power is instant, strong and sustained." Heavy-duty and lightweight reciprocating components support the engine's high-rpm, supercharged performance. The parts are housed in an aluminum cylinder block that features nodular iron, six-bolt main caps. Cast iron cylinder liners -- measuring 4.06 inches (103.25 mm) in bore diameter -- are inserted in the aluminum block and they are finish-bored and honed with a deck plate installed. The deck plate simulates the pressure and minute dimensional variances applied to the block when the cylinder heads are installed, ensuring a higher degree of accuracy that promotes maximum cylinder head sealing, piston ring fit and overall engine performance. Nestled inside the LSA's deep-skirted cylinder block is a forged steel crankshaft that delivers a 3.62-inch (92 mm) stroke. It features an eight-bolt flange -- the outer face of the crankshaft on which the flywheel is mounted -- that provides enhanced clamping strength. Other non-supercharged GM 6.2L engines have a six-bolt flange. A torsional damper mounted to the front of the crankshaft features a keyway and friction washer, which is designed to support the engine's high loads. Connected to the crankshaft is a set of lightweight powder-metal connecting rods and hypereutectic pistons, which, when combined with the cylinder heads, delivers a 9.1:1 compression ratio. The alloy of the pistons was selected for its strength and heat resistance properties, while the cast design provides inherent quieting advantages over other piston materials, such as forged aluminum. Exceptional airflow High-flow cylinder heads based on GM's proven L92 design channel incoming air into the combustion chambers. They are made with a premium A356T6 alloy that offers excellent heat resistance, particularly in the bridge area of the cylinder head, between the intake and Exhaust valves. Additionally, each head is manufactured with a roto-casting method.

2012 Chevrolet Camaro ZL1 Start Up, Exhaust, and In Depth Review
Hello and welcome to Saabkyle04! YouTube's largest collection of automotive variety! In today's video, we'll take an up close and personal, in depth look at the 2012 Chevrolet Camaro ZL1. MSRP pricing for the 2012 ZL1 starts around: $54,095 ***Prices may vary depending on options During this presentation, we will take a 1st person look at what the vehicle is all about beginning with the start up, performance data, fuel economy, the occasional track data, and build quality. Also, I will teach you how to use most of the interior and exterior features in a detailed fashion, that before, you could only get from going to a dealership yourself! Throughout the video, I will highlight key styling and unique differences about the vehicle, any available options, and of course it would not be an enthusiast car video without the good ole engine portion with rev and Exhaust note with interior and exterior perspectives. A thorough tour/review of this car designed to give others a greater overall appreciation of the vehicle. FOR MORE INFORMATION ABOUT THE CHANNEL SEE BELOW: In this channel you will find in depth educational videos of automobiles from all over the world, presented in a more detailed fashion than ever before. Basically, this gives the viewer the chance to view the most detailed 1st person look you can get without going to an actual dealer yourself! Every video is consistent in the way I present so viewers know what to expect in my presentations. I treat every vehicle with the same respect whether a 1960 Chevrolet Impala SS or the 2012 Lamborghini Aventador. I film all types of vehicles from past, present, and future while broadening the knowledge of the automotive enthusiast. You will see everything from vintage, brand new, exotic, mainstream, old, etc. I am very proud of this channel and have built it up from amateur videos years ago to what you see today. I wanted to share my love for the automotive world with the rest of the world. Be sure to explore the massive video variety, have fun and enjoy The Driver's Seat of YouTube! FIND ME ON THE OFFICIAL SAABKYLE04 FACEBOOK PAGE FOR CONTINUOUS UPDATES ON WHAT'S TO COME AND INTERACTING WITH OTHER FANS! http://www.facebook.com/pages/saabkyle04/315743567772

Motoramic Drives: 2012 Chevrolet Camaro ZL1
The first independent video of the 2012 Chevrolet Camaro ZL1 on the track. Visit us for more at Motoramic, the Yahoo Autos blog: http://www.motoramic.com

Camaro Nation Endures an emotional rollercoaster - ZL1 vs GT500
The Camaro faithful are informed of the amazing capabilities of the new ZL1 just in time to taken to extreme depression by the 2013 GT500. Elsewhere, Hitler digests the news in the Fuhrerbunker.

2013 Camaro ZL1
a view of a 2013 Camaro ZL1

Chevrolet at Camaro5 Fest 2011 | Chevy Camaro | Chevrolet
On April 15, 2011, we followed a caravan of 150 5th generation Camaros to Camaro5 Fest in Phoenix, Arizona. Our goal was to make a pilgrimage to the heart of the Camaro nation to learn more about Camaro drivers from across the U.S. Be sure to join this year's Camaro5 Fest in Indianapolis, Indiana, on August 2-4, 2012.

2012 Chevrolet Camaro ZL1 Coupe Engine Footage
2012 Camaro ZL1 Features Technically Advanced 6.2L Supercharged V-8 CHICAGO -- The all-new, 2012 Chevrolet Camaro ZL1 is powered by the LSA 6.2L supercharged V-8 engine that produces an estimated 550 horsepower (410 kW) and 550 lb.-ft. of torque (745 Nm). The LSA is the most powerful engine ever offered in a Camaro, eclipsing even the original ZL1 engine from 1969 that inspired the name of the new, maximum-performance model. Built on GM's legendary small-block V-8 architecture, it features an intercooled Supercharger system, premium heat-resistant aluminum cylinder heads and other details designed to ensure its exceptional performance is delivered with smoothness and refinement. "The LSA is the ultimate engine for the ultimate Camaro," said John Rydzewski, assistant chief engineer for small-block engines. "It has a broad power band that matches the Camaro ZL1's performance capabilities at every notch on the tachometer." Components and design elements that contribute to the LSA's performance include: ■Balanced, lightweight reciprocating assembly ■High-strength hypereutectic pistons ■Sixth-generation Eaton Supercharger with four-lobe rotors ■Center-feed fuel system ■Piston oil squirters. A Tremec TR6060 six-speed manual transmission is matched with the LSA. It uses a 240-mm dual-mass flywheel matched with a 240-mm twin-disc clutch system to provide excellent shift smoothness. Compared to the Cadillac application, the LSA used in the Camaro features the following unique components and details: ■Black Intercooler housing with unique heat exchanger and plumbing to accommodate the Camaro engine compartment ■Cast stainless steel Exhaust manifolds for enhanced thermal management ■Camaro-specific oil pan ■Revised accessory drive with unique alternator and air conditioning compressor ■Idler pulley in place of the conventional power steering pump pulley, because of the use of electric power steering ■Special engine cover in red. Supercharged power delivery The LSA engine's sixth-generation Eaton Supercharger, with high-helix, four-lobe rotors, enables a broad range of power through the rpm band, giving the engine great low-end torque and excellent horsepower at higher rpm. "The design of the Supercharger's rotating internal components extends its effective range, giving the engine a wide, flat power band that is usable at all rpm levels," said Rydzewski, assistant chief engineer. "Whether at low speeds or on the highway, the feeling of power is instant, strong and sustained." Heavy-duty and lightweight reciprocating components support the engine's high-rpm, supercharged performance. The parts are housed in an aluminum cylinder block that features nodular iron, six-bolt main caps. Cast iron cylinder liners -- measuring 4.06 inches (103.25 mm) in bore diameter -- are inserted in the aluminum block and they are finish-bored and honed with a deck plate installed. The deck plate simulates the pressure and minute dimensional variances applied to the block when the cylinder heads are installed, ensuring a higher degree of accuracy that promotes maximum cylinder head sealing, piston ring fit and overall engine performance. Nestled inside the LSA's deep-skirted cylinder block is a forged steel crankshaft that delivers a 3.62-inch (92 mm) stroke. It features an eight-bolt flange -- the outer face of the crankshaft on which the flywheel is mounted -- that provides enhanced clamping strength. Other non-supercharged GM 6.2L engines have a six-bolt flange. A torsional damper mounted to the front of the crankshaft features a keyway and friction washer, which is designed to support the engine's high loads. Connected to the crankshaft is a set of lightweight powder-metal connecting rods and hypereutectic pistons, which, when combined with the cylinder heads, delivers a 9.1:1 compression ratio. The alloy of the pistons was selected for its strength and heat resistance properties, while the cast design provides inherent quieting advantages over other piston materials, such as forged aluminum. Exceptional airflow High-flow cylinder heads based on GM's proven L92 design channel incoming air into the combustion chambers. They are made with a premium A356T6 alloy that offers excellent heat resistance, particularly in the bridge area of the cylinder head, between the intake and Exhaust valves. Additionally, each head is manufactured with a roto-casting method. Also known as spin casting, the roto-casting process involves pouring the molten alloy into a rotating mold, for a more even distribution of the material that virtually eliminates porosity -- air bubbles or pockets trapped in the casting -- for a stronger finished product.

2012 Chevrolet Camaro ZL1 Track Test Drive & Muscle Car Video Review
http://www.autobytel.com/chevrolet/Camaro/2012/zl1-coupe/ Autobytel Road Test Editor T.J. Keon recently had the chance to test drive the all new 2012 Chevrolet Camaro ZL1 on the street as well as on the track at Virginia International Raceway. The Camaro ZL1 sports a supercharged V-8 engine that makes 580 horsepower. Base price for the ZL1 is $54,095. On the road the Camaro ZL1 feels firm and planted, but the ride is not rough or harsh. In fact the 2012 Chevy Camaro ZL1 could make for a great daily driver. The Alcantara lined seats and steering wheel feel great and are usually reserved for high end luxury cars. But make no mistake; the ZL1 was designed to kick-butt! One of the things that make the ZL1 special is the optional 20-inch lightweight track wheel. These black 10-spoke rims are made from forged aluminum for strength. The rims are wrapped in Goodyear Eagle F1 Generation 2 tires sized P285/35ZR20 up front and P305/35ZR20 out back. A huge Brembo Brake package sits behind these sinister rims. Suspension chores are handled by the Magnetic Ride Control System. The shocks are filled with a magnetorheological fluid and the dampening levels are computer controlled and adjusted up to 1000 per second. This makes for a comfortable ride on the road and a more than capable ride on the track. The 2012 Chevrolet Camaro ZL1 is powered by a Supercharged Corvette engine dubbed the LSA. The 6.2 liter V-8 engine packs an Eaton Supercharger on top. Power output is 580 horsepower and 556 lb-ft. of torque. The Supercharger provides plenty of torque at any RPM level so that the power is there whenever you want it! You can choose between a Hydra-Matic 6-Speed Automatic Transmission w/TAPSHIFT or Tremec 6-speed manual transmission. The Camaro ZL1 can run from 0-60 MPH in 4.0 seconds and can eclipse the ¼ mile in 12.0 seconds. Top speed for the ZL1 is 180 MPH. Fuel economy is 14 MPG in the city and 19 MPG on the highway if you are wondering. On the road the 2012 Chevrolet Camaro ZL1 pulls hard from any RPM thanks to the flat torque curve provided by the Supercharger. Practically every part on the Camaro ZL1 was designed to aid this Muscle Car in going fast. At just $54,095 the ZL1 can't be beat when you are talking high performance for the money. The 2012 Chevrolet Camaro ZL1 sports the amount of technology and horsepower you would expect to find on a car costing 4 times at much. Check out the Exclusive Camaro ZL1 Walk Around with GM's Performance Design Director http://www.youtube.com/watch?v=kH5P7fjt7BI See More Car Videos http://www.autobytel.com/car-videos/ Join Our Facebook Page http://www.facebook.com/autobytel

Lingenfelter Camaro ZL1 Tops 200 MPH! - Hot Rod Unlimited Episode 7
On this episode of HOT ROD Unlimited, HOT ROD Editor In Chief David Freiburger drives the Lingenfelter Performance Engineering Camaro ZL1 to 202 mph, making it the first 2012 ZL1 to exceed 200 mph. This very same ZL1 in the exact same configuration (save for wheels and tires and the rollcage) was also the first to run 10s in the quarter mile. The ZL1 Camaros were first delivered to the public in early April, making 580 hp from their supercharged, 6.2L, LSA engines. Within days of delivery, Lingenfelter had its ZL1 making 720 hp at 6,500 rpm and 650 lb-ft at 4,650 rpm, both measured at the rear tires. The performance parts are all from Lingenfelter: CNC-ported cylinder heads, a GT9 camshaft, a ported Supercharger cover, overdrive blower pulleys, a cold-air kit, 63-lb/hr fuel injectors, a voltage Booster for the fuel pump, a 160-degree thermostat, and tuning. The entire package, installed, is $11,495. Everything else on this manual-trans car is stock. The performance testing was done with 109-octane VP fuel and 15 psi Boost. On April 18, 2012, the Lingenfelter ZL1 ran 10.79 at 134.36 mph at Muncie Dragway in Indiana. That was on drag wheels and tires. On April 30, 2012, the car was delivered to the Continental Tire Proving Grounds in Uvalde, Texas. Shod with Continental Extreme Contact tires on the original ZL1 wheels, the Camaro was tested on the 8-1/2-mile oval. The three-lane surface is like a road rather than a race track, the turns are not banked, and there are a few elevation changes. During the top-speed run, Freiburger pulled 0.4 to 0.5 g at 190-plus mph in the sweeping turns, then held it down for nearly 40 seconds on the pull from 190 to 202.67 mph before lifting to avoid cresting a small hill at corner entry at 200-plus mph. The car had not reached terminal velocity. Conditions included a head/crosswind, ambient temperatures in the 90s, and a density altitude of 3,280 feet. The Camaro was aerodynamically stock except for some tape over the front brake-duct openings in an attempt to channel more air through the stock air-to-water Intercooler, as the water was reaching temps in the 250s during prolonged periods of WOT, leading to hot inlet air and reduced power. Naturally, the comments here will lead to the upcoming ¹13 Ford Mustang GT500, with claims of 200 mph capability in bone stock trim. A stock Camaro ZL1 will run 185 mph. Will the GT500 be faster than the Lingenfelter ZL1? Until someone shows up at the same track on the same day with both cars and a single driver, no one will know. Meanwhile, we present the first ZL1 to eclipse the double century mark. See more at Lingenfelter.com and HotRod.com. HOT ROD Unlimited appears every other Friday on the new Motor Trend channel. http://www.youtube.com/motortrend Subscribe now to make sure you're in on all the action! http://www.youtube.com/subscription_center?add_user=motortrend Facebook - http://facebook.com/motortrendmag & http://facebook.com/hotrodmag Twitter - http://twitter.com/motortrend Google+ - https://plus.google.com/101867967859016552744/posts Website - http://www.motortrend.com & http://www.hotrod.com

Ford Shelby GT500 v Chevrolet Camaro ZL1 : Street & Circuit - CHRIS HARRIS ON CARS
The two muscle-motors of the moment, head-to-head. Hard to imagine a factory warranted Mustang with 670hp, or a State-subsidised 580hp Camaro!