1984 Firebird SE 350 crate with magnaflow muffler
This is my daily driver so i wanted something kinda mellow at idle and
cruise, but like any hotrodder, i wanted it to talk to me when i got on the
loud pedal. Well this muffler does just that, it's nice and mellow (a
little deeper than stock but lower db than stock!) at idle and cruise but
absolutely SCREAMS at WOT. GM 260hp 350 crate, hooker 2460 shorties,
Walter Racecraft y-pipe and 3" single back to a single in/out magnaflow
muffler dumped under the rear bumper.
Kuikentje shows his pontiac firebird V8
Mike matijssen uit Valburg did a good job in rebuilding this Pontiac
Firebird. He is a truckmechanic and also overhauled the engine etc etc.
My Pontiac Firebird TransAM V8 350cid Vortec 380HP !570Nm! flowmaster exhaust
Kiev Ukraine :) Hand Made
Vortec ported heads,vortec edelbrock intake, comp cams 206\212
480\480inch, Holley 506-2 TBI with 68lb injectors,headman headers,
aluminium water pump,180 degrees thermostat,3inch flowmaster, personally
tuned with WINALDL and TunerPro. TH700R4 , 3.23 posi rear end. Машина
восстановлена из состояния дрова мной и
моими механиками :) Бош Сервис жжот :) 300+HP
!570Nm like a John Deere 10L diesel
1991 Formula Firebird WS6 0-60 0-100 Acceleration & Walkaround
Just a brief video of my new Firebird.
Has a brief walkaround and a little 0-100 pull at near WOT with a very
babied launch (tranny is still being broken in so I'm being easy on it)
350 TPI with 57,000 miles on it pulled out of a 92 firebird (245 crank
Has a intake/chip/mild cam/Exhaust/global west subframe connectors backed
by the WS6 suspension. Tranny has a B&M Shift Kit.
Body of the car has 120,000 on it - odometer reads different because the
current gauge cluster which is a 140mph cluster was swapped in for the old
I'm basically enjoying driving it for a few months before I put it into
winter storage and begin working to restore/fix the worst parts of the car
- basically being the floorpans and the interior. Have seat covers for the
seats now but am going to pull the leather seats out of a 4th gen fbody to
replace the current ones.
Needs a few other minor things - going to fix some rust as well.
Overall, I bought it for $2700 - I can't complain!
84 Trans Am exhaust 305 LG4 Exhaust Sound, internal and external.
Exhaust mods include Flowtech headers
and Flowtech Y-pipe, high flow cat, 2.5" pipe from cat to muffler,
Flowmaster 40 muffler with 2.5" tips
91 Camaro rs 305 TBI flowmaster 40 series
my Camaro 1991 RS with
a 305 tbi. Its got a 40 series flowmaster muffler and the rest is stock
but im taking out the cat soon :-)
I KNOW IT SMOKES I ACCIDENTALLY PUT MIXED GAS FROM A LEAFBLOWER IN THERE
BECAUSE MY DAD MIXED THE REGULAR GAS WITHOUT TELLING ME
and its also on empty and somewhat cold out + raining which adds to the
Wondering if anyone else has a huge amount of water pour out like mine does
if you watch the far pipe when i rev it. Is my head gasket starting to go?
or is it cuz its been sitting? my coolant and oil and temp are all fine
its got Fatttt tires 11.5" wide in the back 10.5" in the front
KYB AGX gas shocks adjusted to the stiffest right now :-)
1988 Firebird Formula 305 TPI 5 speed Magnaflow exhaust
My 1988 firebird formula, WS6, 305 TPI 5 speed, T-tops. Magnaflow Exhaust with MAC Test Pipe, stock y pipe and
video on the Dyno in
2010 bone stock :
drive off: http://www.youtube.com/watch?v=BWpyryCJTsY&feature=plcp
full throttle: http://www.youtube.com/watch?v=EAMteb_XveA&feature=plcp