3rd Gen Camaro Build
A (lotta) work in progress. I started this project to swap a 191cubic inch
V6 to a 350 V8 (along with performance parts, and swapping & upgrading the
transmission) in 2009. (see modifications list below.) These are pictures
and videos as I progressed and the very first engine start and test drive.
I applied primer to protect the metal as I knew I would have to put the
project on hold, which is where it has been since. Plan to start again by
gutting & redoing the interior here in 2012.
350 block swap
moddified Vortec heads
CompCams XE268 cam
Edelbrock Performer RPM Vortec intake
Edelbrock 750cfm AVS carb
Headman 1 5/8 headers
- .500" line pressure Boost valve
- huge servos
- servo release check valve
- TCI throttle valve
- TCI Breakaway 2400 stall converter (lockup)
- B&M ratchet shifter, front oil cooler, TrickShift oil.
91 Camaro rs 305 TBI flowmaster 40 series
my Camaro 1991 RS with
a 305 tbi. Its got a 40 series flowmaster muffler and the rest is stock
but im taking out the cat soon :-)
I KNOW IT SMOKES I ACCIDENTALLY PUT MIXED GAS FROM A LEAFBLOWER IN THERE
BECAUSE MY DAD MIXED THE REGULAR GAS WITHOUT TELLING ME
and its also on empty and somewhat cold out + raining which adds to the
Wondering if anyone else has a huge amount of water pour out like mine does
if you watch the far pipe when i rev it. Is my head gasket starting to go?
or is it cuz its been sitting? my coolant and oil and temp are all fine
its got Fatttt tires 11.5" wide in the back 10.5" in the front
KYB AGX gas shocks adjusted to the stiffest right now :-)
LT1 3rd Gen Camaro Exhaust
1987 Iroc-Z, Fresh 95 LT1 Motor Swap, LT4 Hotcam, Shortty Edelbrock
Headers, 2'5 Y-Pipe Single Exhaust w/
NOTE: Upon removal of the stock heads its was determined that the smoke was
caused by a broken valve seal. They have since been replaced with a set of
aluminum trickflow ported heads. The Smoke is now gone.
The Exhaust has also been painted
black underneath so it dosnt look like crap anymore, it also has a set of
3" Chrome Stainless end tips.
91 Z28 Camaro Magnaflow Exhaust
This is my 91 Z28 Camaro, just wanted to do a quick
vid on my Magnaflow cat back Exhaust.
The y pipe has a minor Exhaust leak
which is driving me nuts but will be soon replaced with a new set of
headers and off road y pipe. Hope you guys enjoy!
91 Camaro flowmaster
this is my 91 Camaro rs
it has a 3.1L V6 with a flowmaster 80 series on it, i also have a new pipe
going from cat to muffler, and also have K&N filters in an intake from an
The Camaro has many new
changes and no longer sounds like this, haha its wierd hearing what it used
to sound like
the smoke from the tail pipes is because its a cold start
90 Camaro V8 Swap First Start Up
My father and I have worked on and off for the past 8 months or so to
convert my 3.1L V6 Camaro to a 5.7L V8.
This is just the raw video because I am excited to have it running lol
Also, ignore the fact that I'm jumping around like a little school girl.
Like I said, I was/am very excited. Enjoy.