The First time my 400 Big Block got started.
KRE WARP 6 headed 535 cid Pontiac engine idel on dyno
This is the fist KRE WARP 6 headed 535 cid Pontiac engine at idel on the Dyno. This engine is
built using a K&M Performance Parts MR-1 block, with KRE's canted valve
WARP 6 cylinder heads. This is a fully machined casting with water jackets
that flows over 400 cfm as cast. This is the ULTIMATE Pontiac cylinder
Tony Bromley's 400 to 460 stroke Pontiac Dyno Pull | QMP Racing
550 torque @ 5800rpm
535hp @ 4000rpm
For those of you paying attention and noticed the numbers aren't the same
on the screenshot, its because we made another few runs, but didn't tape
them. We'll upload a pic soon.
QMP Racing is located in Chatsworth, CA
Check out our website: www.qmpracing.com
Like us: facebook.com/qmpracing
qmp racing quarter mile race car engine motor custom high performance
chatsworth California hp horse power torque trq Dyno rpm turbo drag Exhaust run Boost psi dragster raceway nitro Nitrous super Supercharger muscle burnout idle motorsports Mustang cam Ford hydraulic
Street pontiac Cars Supra "Drag Racing" Pontiac Shelby Dodge Twin Stock
Mazda Ls1 Motorcycle Bike
Pontiac 535 engine by Tin Indian Performance 1000+ Horsepower ideling on dyno
This is the current combo that is in the Tin Indian Performance Dragster.
Combo features a MR-1 cast iron block, forged crankshaft, GRP Rods, Ross
Pistons, Total Seal rings, Custom camshaft, KRE 400 CFM High Port Heads,
KRE Sheet metal intake with CNC'ed runners and 2 1250 holley dominator
carbs. Special KRE made Tri-Y headers, and Star Machine vac pump. This
combo makes 1013 hp @ 7800 rpm and 769 ft lbs of torque at 6200 rpm. This
engine has taken our TIP dragster a best of 7.14 @ 186.51 at Norwalk
Raceway Park in September 2009! www.tinindianperformance.com
PONTIAC - stock Pontiac Super Duty 421v8/405hp vs stock Chevy 409v8/409hp on DYNO
WATCH THE VID TO SEE HOW CLOSE THEY Dyno TO THEIR FACTORY
405hp/409hp ratings. Growing up.....Pontiac/Oldsmobile old timers/EXPERTS
who taught me most of what I know, often told me Chevy rated their horsepower in a more
optimistic way than say Oldsmobile or Pontiac. I've even heard Pontiac
rated/tested their engines in a 100 degree room, compared to Chevy in a 60
degree room. These Dyno results seem to reflect
that some of what I heard was true. Both of these engines are great, but
the results do seem to show that Pontiac was not rating their horsepower worrying if it
would cause "songs to be written" about their engines .... like the great
song "She's real fine my 409"--(Chevy).
Custom 1972 Pontiac Firebird - V8 sound!
Jamboolio records a fully restored 1972 Pontiac Firebird with the 350 cid
5.7L V8 engine and a stunning new paint job.
The monstrous hood scoops and huge air vents added to the all black
exterior makes it a very bad-ass looking muscle car beast! The Exhaust sound is pretty awesome too! Enjoy.
Location: 'Helsinki Cruising Night'
Helsinki, Finland 2013
- 800 HP Dodge Charger 605 cid / 9.9 L - The most bad-ass American muscle
car ever?! http://youtu.be/ZYoo5zZD4lk
- EXTREMELY LOUD Supercharged Corvette C6 Z06 http://youtu.be/yLXmSkqOi6E
- 1970 Dodge Challenger R/T 440 Magnum - amazing V8 and Exhaust sound! http://youtu.be/uP7yw40HF5o
Watch in High Definition (1080p HD).
RATE, COMMENT & SUBSCRIBE!
SUBSCRIBE for more upcoming automotive videos:
Follow Jamboolio on TWITTER:
Sehr Performance Machine / Randi's 400 Pontiac
Randi came to us with a 400 Pontiac project for his 1968 Firebird. He
didn't want to go crazy on the build but he wanted something that would
give him performance that is better than original.
With that goal in mind Scott did some custom porting on his heads, upgraded
his valve train and went with a Custom COMP cam and lifters and aluminum
roller rockers. We maintained his complete original rotating assembly but
had to re-balance his crankshaft, it had been poorly balanced sometime in
the past and was out by 127 grams on one end and 181 grams on the other. A
single plane intake with a 780 Quick Fuel carb got it breathing and the
fire is lit with a Flamethrower ignition package. Custom cut and fitted
8mm plug wires are standard equipment here at Sehr. Headman custom coated
headers will be added at installation time.
The results were a satisfying 543.5 Hp @ 5500rpm and torque reading of
519.8 @ 5400rpm. Corrected to sea level the numbers are 577 Hp and 551 Tq
with nearly 400 lb of torque at 3500rpm.
1967 GTO restoration
My 67 GTO resto project, those were the good old days, nothing better than
pure american muscle.
Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance
is made for "fair use" for purposes such as criticism, comment, news
reporting, teaching, scholarship, and research. Fair use is a use permitted
by copyright statute that might otherwise be infringing. Non-profit,
educational or personal use tips the balance in favor of fair use.