TJ Bothelo's 4g63 Powered Honda S2000 making a 10 second pass.
2.0l, powerglide
New England Dragway - Epping, NH.
Import Face Off - May 20, 2012
New England DSM.
TX2K12 - 8 Second 2JZ S2000 Giant Wheelie!
TX2K12 DVD Released! http://www.1320video.com/store/dvd/ Raw Performance's 2ZJ powered Honda S2000 decided it would try and launch off the drag strip Sunday at TX2K12 during an elimination pass against the Majestic Motorsports Supra.
4g63 Mighty Max drag race, Kevin Jewer "World's Fastest 4g63 Mighty Max" 10.81 @ 124 mph - NEW Best*
11's are so last week, Kevin Jewer running a new best ET and MPH in his 4g63 Mighty Max. Always improving.
Current Best ET: 10.818
Current Best MPH: 124.59
60 ft: 1.628
This is on MT ET streets.
Now on the 50 trim turbo.
TCI competition TH350 trans
JM Fabrications RWD intake manifold.
ECMLINK V3
Kevin: "Some other details, it weighs 3000 lbs with me in it. TCI competition TH350 trans. Custom JMF intake and Exhaust manifolds Brent made for me. 2g ECMlink V3 on speed density. Mid 80s Montero LSD in the stock rear axle. MT ET Street radials. Pretty standard 2.3 liter eagle/ross motor. FP 4R cams. 45k miles on the odometer."
New England Dragway
10/24/12
Epping, NH
New England DSM
[FREE sound FX by: Final Cut King - http://www.youtube.com/user/finalcutking
Nyce1s - CCC Racing Turbo Civic @ IFO NED May, 20th 2012!!!
CCC Racing is on the move once again. This time we check in with them at the annual Import Face Off event at New England Dragway in New Hampshire!
Check them out at http://www.facebook.com/cccracing !!
Checkout Nyce1s @ http://www.facebook.com/nyce1s !!!
2JZ Powered S2000 THREE Close Calls!
Another clip pulled from the TX2K12 Blu Ray / DVD - http://www.1320video.com/store/dvd/
The RAW Speed 2JZ Powered S2000 gets loose THREE times and he gets back in it each time to run an 8.32!
Metalux by Chem Spec - S2000 Drag Car
Here is TJ's S2000 Painted with Metalux paint. All the work was done at Carl's Collision Center in Fall River, MA. This is a quick video to show you the steps throughout the paint process and also to show the quality of the finish. The painters are Adrian Pereira and TJ Botelho. The car is getting closer to completion and with be making appearances at many tracks in the north east. This car is a great example of how hard work and attention to detail can build a beautiful machine.
4g63 Mighty Max drag race, Kevin Jewer "World's Fastest 4g63 Mighty Max" 11.54 @ 122 mph - NEW Best*
Kevin Jewer finally got some traction and got a new best ET and MPH in his 4g63 Mighty Max. Always improving.
Current Best ET: 11.54
Current Best MPH: 122.85 (see compilation vid)
Now on the 50 trim turbo.
TCI competition TH350 trans
JM Fabrications RWD intake manifold.
ECMLINK V3
Kevin: "Some other details, it weighs 3000 lbs with me in it. TCI competition TH350 trans. Custom JMF intake and Exhaust manifolds Brent made for me. 2g ECMlink V3 on speed density. Mid 80s Montero LSD in the stock rear axle. MT ET Street radials. Pretty standard 2.3 liter eagle/ross motor. FP 4R cams. 45k miles on the odometer."
New England Dragway
10/17/12
Epping, NH
New England DSM
[FREE Thunder sound FX by: Final Cut King - http://www.youtube.com/user/finalcutking]
701hp S2000 From Hell-Part1
701whp S2000 tuned and built by T1 Race Development. Car has bone stock motor, tranny, and rear end.
***S2K never saw the 701whp in this video, highest hp was around 600whp against the GSXR1000***
All you haters that think its not really pushing out 701whp heres the Dyno video...faggots
http://www.youtube.com/watch?v=KQst99sHUsc
and the music is kanye west 808s and heartbreaks and linkin park, no more sorrow.
4g63 Balance Shaft Elimination - bearing modification
This is the first part of a two part series about balance shaft elimination on 4g series engines. This video details the bearings, the other video will cover the front case modifications. I've already got a low-def video of the front case mods, and I plan to re-shoot that one in HD when I'm in the assembly phase. It's linked in the video.
The balance shafts are designed to cancel out harmonic vibrations caused by combustion and the spinning rotating assembly. They may offer a greater degree of comfort to the driver and passengers, but with that comfort comes a price.
Often, when a 4g63 timing belt gives up, it's because the balance shaft belt breaks or comes loose and takes the timing belt out with it. When that happens, it can total your pistons, valves, damage the crankshaft, wrist pins, timing belt tensioner and crank angle sensor. Basically, it can total your motor. The balance shafts also have a combined weigh over 10 lbs and both are driven off the timing belt making them additional and heavy rotating mass. If you've got a lightweight flywheel but still have balance shafts, you have your priorities mixed up.
So here's what you do with the bearings. It's easy. You can do this at home. You CAN do it with the motor in the car, BUT DON'T. You must enjoy punishment to do this like that.
The end result will slightly increase your oil pressure, but usually not enough to cause concern unless you have a full-circumference bearing turbo, ball bearing turbo--with your oil feed coming off the oil filter housing. The head feed would be better in that case because it's regulated at 15 PSI.
INSANE DRAG RACING CRASHES AND WHEELSTANDS
Taken from Carnage Fest 2 DVD, Check out http://www.urbanhillbilly.com for the best in Heads Up Drag Racing video and DVDs. Urban Hillbilly Action Videos Drag racing, wheelstand, crash, and saves. Pro Mod, Outlaw 10.5 Drag radial.
4g63 BMW E30 runs 9.48 @ 139.6mph drag race, Matt Arruda Turbo BMW IFO NED
Matt Arruda's 4g63 Swapped E30 BMW runs a new best at Import Face Off.
9.48 @ 139.6mph.
9" rear end Ladder bar suspension, G-Force GF5R Trans, E98 fuel.
Infamous Performance.
New England Dragway - Epping, NH.
Import Face Off - May 20, 2012
New England DSM.
