Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

2001.5 Dodge Ram 2500 Cummins Diesel Cold Start + 3 cyl. high idle

Truck had been sitting outside 12 to 14 hours in single digit weather all day with low batteries, kicks into 3 cyl high idle after a minute of running


 


More Videos...


dodge cummins shifting through gears
this is my 2001 dodge 2500 cummins turbo diesel truck. i thought id shoot a video showing yall me shifting through the gears. let me know if you like it!





2014 RAM 1500 EcoDiesel Review
In depth review of 2014 RAM 1500 Eco Diesel's Interior, Exterior, Engine, Mileage and U Connect.





Dodge cummins cold start, lots of smoke
Dodge Cummins Cold start. Unplugged 8 degrees





1991 ford diesel F250 truck cold start , skyhill and mudding Davidsfarmison[bliptv]now
1991 ford diesel F250 truck cold start , skyhill and mudding Davidsfarmison[bliptv]now





OlSMOKY 1100hp Dodge Cummins Dyno Wars
OlSMOKY smokes out the building laying down 1093whp to take 3rd place at '14 Dyno Wars event! Check out talontsi97videos on facebook for more coverage





4BT CUMMINS DIESEL POWERED JEEP
Facebook at https://www.facebook.com/MadRam11 Instagram at http://instagram.com/madram11 Check Out BlueFire Outdoors for all your off road Lighting. http://bluefire-lights.com This Jeep TJ had a 4bt Cummins diesel engine and man it was pretty awesome. It isn't often you see a rock crawler with a diesel engine. Big credit to this guy for thinking outside the box.





Ford F350 vs. Dodge Ram vs. Chevy GMC Sierra Truck Challenge MEGA TEST
Automotive Ad Builder is on the scene at The Truck Challenge at GM's Street's in Motion Follow us on Facebook: http://www.facebook.com/automotivead.builder.1





Ultimate Runaway Diesel Engine Collection Part 1
30 Minutes of complete engine destruction. Detroit Diesels VWs BMWs Trucks Semis No make or model Escapes Diesel runaway. Coming to a badly maintained turbo Diesel Near you





Awesome V12 Monster diesel engine Awake and Alive startup
Awesome V12 Monster diesel engine Awake and Alive startup The first V-type engine (a 2-cylinder vee twin) was built in 1889 by Daimler, to a design by Wilhelm Maybach. By 1903 V8 engines were being produced for motor boat racing by the Société Antoinette to designs by Léon Levavasseur, building on experience gained with in-line four-cylinder engines. In 1904, the Putney Motor Works completed a new V12 marine racing engine -- the first V12 engine produced for any purpose.[2] Known as the 'Craig-Dörwald' engine after Putney's founding partners, the engine mounted pairs of L-head cylinders at a 90 degree included angle on an aluminium crankcase, using the same cylinder pairs that powered the company's standard 2-cylinder car. A single camshaft mounted in the central vee operated the valves directly. As in many marine engines, the camshaft could be slid longitudinally to engage a second set of cams, giving valve timing that reversed the engine's rotation to achieve astern propulsion. "Starting is by pumping a charge into each cylinder and switching on the trembler coils. A sliding camshaft gave direct reversing. The camshaft has fluted webs and main bearings in graduated thickness from the largest at the flywheel end."[3] Displacing 1,119.9 cuin (18,352 cc) (bore and stroke of 4.875" x 5" (123.8 x 127 mm)), the engine weighed 950 pounds (430 kg) and developed 150 bhp (110 kW). Little is known of the engine's achievements in the 40-foot hull for which it was intended, while a scheme to use the engine to power heavy freight vehicles never came to fruition.[2] One V12 Dörwald marine engine was found still running in a Hong Kong junk in the late-1960s. Two more V12s appeared in the 1909-10 motor boat racing season. The Lamb Boat & Engine Company of Clinton, Iowa built a 1,558.6 cuin (25,541 cc (5.25" x 6" (133.4 x 152.4 mm)) engine for the company's 32-foot Lamb IV. It weighed in at 2,114 pounds (959 kg). No weight is known for the massive 3,463.6 cuin (56,758 cc) (7" x 7.5" (177.8 x 190.5 mm)) F-head engine built by the Orleans Motor Company. Output is quoted as "nearly 400 bhp (300 kW)". By 1914, when Panhard built two 2,356.2 cuin (38,611 cc) (5" x 10" (127 x 254 mm)) engines with four-valve cylinder heads the V12 was well established in motor boat racing.[2] In automobiles, V12 engines have not been common due to their complexity and cost. They are used almost exclusively in expensive sports and luxury cars because of their power, smoother operation and distinctive sound. ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ ▬▬ ★ MORE INTERESTING VIDEOS: http://www.youtube.com/watch?v=yrbwGmtZ8pM&list=UUYH8swcp71EHt-88lkaMDTQ ★ SUBSCRIBE: http://goo.gl/GynuUU ★ Follow my Twitter: https://twitter.com/GeorgeDominik1 ★ Thanks For Watching ★ ★ Post comment , share and tell us what u think ★ ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ ▬▬





MARS 5HP DIESEL ENGINE - 1st Start Up in 50 Years!
Watch as an early 1940's MARS Diesel engine is fired up after 50 years. Originally acquired from a cane farmer in Nambour, Queensland, Australia in the 1970's, this engine sat in careful custody with another three owners before finally retiring with me. MARS engines were made by the MARS Machine Tool Manufacturing Company in Brisbane, Australia and were preceded by the horizontal and vertical Rapson and Dutton engine, made by the same company under the Rapson and Dutton company name. MARS engines are not Lister clones. Mars engines are bigger, heavier and more robust than Lister engines. When you listen to a Lister and then to a MARS you will agree. This engine has a 3 " diameter crankshaft and not one component is interchangeable with a Lister. MARS engines were commonly used in industrial situations such as factories to power line shafts which powered a number of machines, a task Lister engines had some trouble with apparently with their crankshafts twisting under the load on start up, and why this company made the Mars Diesel. 5 HP MARS engines were painted Maroon colour as standard from the factory although there are variations of colour in existence. 8 HP engines were a different colour. This engine has not run since the original owner sold it in the early 1970's. Apparently it had not run for some years before that. The second owner sadly passed away before restoring it and it sat in a shed untouched with the third owner. Close friend and temporary fourth owner, Simon Devere, assisted actively in the mechanical restoration when I purchased it and assisted in the first start after its mechanical restoration. This man is a genius when it comes to diesel engines and he has the nickname "The Lister Whisperer" for good reason. Thanks "Slippery". This engine appears to have not done much work judging by its internals. Work to the engine includes new rings, liner/cylinder hone (the original factory liner had indiscernible wear in it), new valve guides made to original specs, new valves to original specs (original was bent and caused damage to the guide) , new big end Babbit bearing, new conrod bush, very light head machine to ensure true flatness, new internal oil pipes, new head gasket, new oil gaskets, new high pressure line, new welch plugs in the head and new oil pickup. There are still remnants of the original factory maroon paint on it that have survived the years of weathering out in the cane fields. Cosmetic restoration is planned shortly to bring it back to its original livery. It will be mated with a steel transporter to emphasise its industrial heritage and will be rallied with pride. Video of the finished engine on transporter will be posted when it is done. Enjoy and please share if you like. This is the only video of a Mars engine running to this date anywhere. Hope to see more. Cheers Phil





-25*C Cold Start Of The 6.2L Turbo Diesel
got a cold start to put other cold starts to shame at -25*C.





detroit 4-71 in gmc 650 running away start after the 30 years
bought the truck for 600 its a 1950 4-71 detroit in had been sitting since 81 chaged the oil and diesel and freeed up all the injectors and it still does this because the fuel rack is frozen





Lil Red Cummins Express - 100PSI Test Passes
Not your typical pickup! Not your typical diesel either, this 1000hp cummins pickup has some serious character, and boy does it get down! The owner was testing at the Bayou Drags this weekend, and although he never mad a full pass, it was a treat to see this thing rollin' coal!





Ford Raptor vs Ram Runner! - Head 2 Head Episode 14
On this episode of Head 2 Head, Motor Trend's Mike Febbo and off-road racer Joe Bacal head to the desert to pit the Ford Raptor against the Ram Runner. Find out which high performance prerunner tames the tarmac and destroys the dirt the best! Head 2 Head appears every other Wednesday on the new Motor Trend channel. http://www.youtube.com/motortrend Subscribe now to make sure you're in on all the action! http://www.youtube.com/subscription_center?add_user=motortrend Facebook - http://facebook.com/motortrendmag & http://www.facebook.com/automobilemag Twitter - http://twitter.com/motortrend & http://twitter.com/automobilemag Google+ - https://plus.google.com/101867967859016552744/posts Website - http://www.motortrend.com & http://www.automobilemag.com





600HP Cummins KTA19 Diesel Engine First Run
First Run Test after rebuild. KTA19 600HP Industrial Diesel Inc http://www.industrialdiesel.net Fort Worth, Texas 76177 817-232-1071 800-323-3659




Which car is faster? Which Car is Faster?





Similar 1/4 mile timeslips to browse:

2006 Mazda 3 : 10.150 @ 134.000
Vincent Tiaga, Engine: Mazda I4, Supercharger: na Turbos: na Tires: M&H


2005 Mazda 3 SP23: 11.659 @ 128.790
Kurt Scott, Engine: 2.3L, Supercharger: N/A Turbos: GT3582


2008 Mazda 3 mazdaspeed3: 11.682 @ 117.170
NJSPEED3, Engine: 2.3L mzr/disi , Turbos: T3 HTA3586 .82ar


2008 Mazda 3 MPS: 12.350 @ 119.830
RE-ACTIONENGSPEED3, Engine: mzr, Turbos: k4 hybrid


2009 Mazda 3 Speed3: 12.737 @ 108.510
Daniel Lalonde, Engine: mzrdisi 2,3, Turbos: k04 Tires: Toyo RA1 235/40/17@16psi


2008 Mazda 3 Mazdaspeed 3: 12.793 @ 106.900
driver311, Tires: m@h 24.5x8.5x15 inch slicks


2007 Mazda 3 Mazdaspeed: 12.847 @ 111.635
Dave, Engine: 2.3L MRZ DISI TURBO, Turbos: stock Tires: pontenza


2007 Mazda 3 Mazdaspeed 3: 12.906 @ 111.140
Laloosh, Tires: STREET


2013 Mazda 3 MAZDASPEED 3: 12.988 @ 107.850
Michael Vincent Sarricchio, Engine: MZR DISI, Turbos: STOCK K04 Tires: FACTORY TIRE


2007 Mazda 3 Speed3: 13.190 @ 110.670
Kyle Hasenheyer, Engine: Stock engine, Turbos: Stock K04 turbo Tires: Venezia Crusade HP


2010 Mazda 3 Mazdaspeed 3: 13.264 @ 108.230
Jimmy, Engine: Stock, Supercharger: NA Turbos: Stock Tires: G-force T/A KDW 2's


2008 Mazda 3 Mazdaspeed3 Grand Touring: 13.330 @ 107.980
James Rondepierre, Engine: 2.3L Direct Injected, Turbocharged, Intercooled, Supercharger: N/A Turbos: K04 STOCK Tires: HANKOOK VENTUS V12 EVO (STREET TIRES) (25PSI)


2007 Mazda 3 MazdaSpeed 3: 13.394 @ 104.330
Brandon,


2010 Mazda 3 Mazdaspeed 3: 13.485 @ 108.840
Michael Loopy, Engine: 2.3 litre, Turbos: Stock K04


2007 Mazda 3 Mazdaspeed3 GT: 13.488 @ 103.220
Matt, Engine: 2.3 MZR turbo, Supercharger: n/a Turbos: stock Tires: 245/50/16 Nitto NT555 Extreme Drag's for track onl


2008 Mazda 3 mazdaspeed3: 13.555 @ 103.430
mike speed, Engine: stock, Turbos: stock Tires: winter tire front


2008 Mazda 3 Mazdaspeed 3: 13.565 @ 104.700
Darryn Nine, Engine: 2.3L Turbo, Turbos: Stock K04 Tires: 225/45/18 Achilles ATR Sport


2011 Mazda 3 Mazdaspeed: 13.572 @ 106.990
Justin, Engine: 2.3 DISI, Turbos: K04


2009 Mazda 3 Speed 3: 13.714 @ 102.430
zack, Engine: intake, BOV, Supercharger: n/a Turbos: stock Tires: stock


2008 Mazda 3 Mazdaspeed3: 13.736 @ 102.340
BLKSp33d3, Engine: 2.3L DISI Turbo, Turbos: Stock KO4


 


©2014 DragTimes - Disclaimer