CRX of DEATH!
Disclaimer: This is not my car
the car belongs to my good friend's father. It is a 88 Crx SI. B20/Vtec
The car used to have an Lsvtec setup which the Dyno video is posted in my
video. best time is 12.6@ 109 mph
********attention new times 12.2 @ 111*****
Civic V6 swap
V6 Swap into a 92 or 93 Hatch. This is one of the first V6 swaps that I
have ever seen. This is not my car. This was at the 08 Eibach Meet and I
talked to the guy that built this car. He told me that he worked with
Hasport to develop the motor mounts.
Honda Civic a Alex
C'est le civic a Alex sur lequel on a installer un "turbo" en fait c'est un blower a feuille qu'on a
pluger sur l'intake du civic, sa l'aide un peu.
AJP Turbo 420 whp on Honda Civic SI
http://ajperformance.com - AJP turbo kit
makes 420 whp on a 2007 Honda Civic SI with a stock motor at 9.25 psi.
Tuning is with a Hondata reflash for AJP turbo kit and AEM Fuel/Ignition Controller. This
was our first car with the newer Precision turbo 6262S with a faster spool-up time and lower back
The Hondata reflash is good only up to 8.5 psi; the AEM FIC is used for the
Julio from Orlando, FL vows payback on Evo's, Subarus and SRT-4s.
*Update July 2009 * - This car has been sold to a buyer in Kuwait.
Team 1320 382whp All Motor K26 Eg Getting Ready For 2011 IDRC West Coast Nationals
Idle and walking around of Team 1320's All Motor Street Car. Getting her
readyy to race IDRC at Fontana auto club aka funtucky April 23rd. 67mm
kinsler ITB w/ eight injector set up. primary's run at idle and low RPM and
secondary top feed injection transition on at high RPM for better
atomization. Custom GO-Powermotorsport / Webcam single lobe vtec killer
camshafts, machined factory roller rockers, skunk2 valve train, GO-Pwr 2.6L
106.xxmm crankshaft k24stroker kit, 90mm arias aluminum 15:5:1 compression
ratio pistons. k24 GRP aluminum rods, aebs sleeves, port flow head, aem
ems, race pack data log and display dash, rywire milspec wiring harness,
fuel lab fuel system with x8 ID injectors, meziere external water pump,
Clutchmasters FX725 twin disc clutch and flywheel kit, Quaife LSD
differential, 4.7fd, 1-4 PAR dog box transmission. GO-Pwr hood exit header,
Q16 race gas skunk2 suspension and camber kit. hasport mounts, 8.50 et's
and slower roll cage done by GO-PWRmotorsports.