Street Fords DVD - Barra Strip Down
From 2007, host Racin' Jason strips down a Ford Barra (XR6) engine, then
catches up with Brad from Atomic Performance Products about their
FG GTP FALCON SUPERCHARGER UPGRADE
Another day in the office and another day hanging out with the boys from
EMG... at CHE... with HTV. Holy acronyms!
Anyway, here's Roy from Street Fords Magazine checking out the guys at
Castle Hill Performance Centre fitting and tuning a Herrod upgrade kit for
the new Coyote powered FG Falcons!
For more info on this install head to www.performancegarage.com.au
2003 BA XR6 VORTECH V2 SUPERCHARGED
this is my supercharged ba, all work has been carried out by myself with
help of friends and family, all tuning and tweaking by heinrick performance
FG XR6 Supercharged
Hey guys , here is a quick video of my FG XR6 Series 2 (MKII) supercharged
using the v-2 SQ Supercharger and water
to air Intercooler supplied
by CAPA, currently at 340 rwhp because timing belt has been cut as it was
running lean on the high revs so its limited at 4500 until larger injectors
are put in which are coming soon. therefore a proper run on the Dyno will be done then with the
injectors in and will notify you guys once its done, also has a custom 2.5
inch cat back Exhaust by genie
everything else is stock for the moment. Currently this is the only fg xr6
series 2 supercharged in Australia dont get this mixed up with the fact
that there are several series one fg xr6 supercharged throughout Australia.
Before you comment about why I didn't get a turbo dont waste your time i wanted this to be
unique so i decided to do this so dont bother with asking.It was my
decision to make this car different and to suit the way i drive and how i
wanted the car to be modified. any questions feel free to ask.
Australia's Quickest BA XR6 Turbo
Phil Chain's XR6 turbo currently holds
the record with an 8.4 at 166mph, but the boys had some problems getting it
down the track at Jamboree and only (??) managed a couple of 9.1sec runs at
over 160mph. It's a beast of a thing with a massive GT47R turbo. How soon until we see a 7sec pass from an
XR6 turbo is Australia?
How to Build A Burnout Car - VP Commodore V6.
500 dollar car, less than 200 dollars of parts, 4 weekends of work, this is
the outcome. This car is not finished and there will be more videos posted,
we're hoping to put a bigger motor into it soon.
So, what did you think?
Also, check out - http://www.youtube.com/shimma777
BTA Motorsports 1000hp 'Monster' Ford F6 turbo
Just how far can you push the tried and proven Ford straight six? This is
what we try to find out with our project "Monster" F6.
The goal? A 1000hp engine in a street package. The result? 1300hp+ from the
engine with 992.8hp at the rear wheels.
For more info, check out the Project F6 build blog:
Part 1 - http://www.btamotorsports.com.au/index.php/project-xr6-1000/
Part 2 -
Part 3 -
Girl Talk - Can't Stop
Wake - Steppin
Go-qualia - Bate MIDI 4 Too A Buried Motif
CROW CAMS Stage II cams with CROW High Performance valve springs for XR6 Turbo
CROW CAMS stage II cams for FPV F6 XR6 turbo and Non turbo Falcon 6 cyl will produce +20 rwkw of extra
power. High Performance CROW CAMS Valve springs are the very best and are
recomended for the application of these cams in turbo Vehicles.
Custom tuning is required after fitting these cams.
RRP for Stage II Cams $900*
RRP for Valve Springs $820*
*Prices subject to change at any time.