Here I just ramble on about how my W58 showed up with a bent gear select lever, and how I got lucky in making it work by using a shortshifter I had which has a slightly longer shaft that placed the shifter bracket further downward to cancel out the bend, lol.
#1 1995 1JZ Sc300 manual transmission removal
I did a full Soarer R154 1JZGTE engine swap with a JDM Supra 6spd 3.26
torsen differential and 1 piece driveshaft.
In this video series I'm removing the R154, driveshaft and 3.26
differential so that I can put the stock W58, driveshaft and 4.08
differential back into the car.
Trans & Clutch 4 - Installing The Clutch
What you wanted to know about clutches but were afraid to ask.
I'm putting a ACT MB1-XTSS on the car in this video. Step height, clutch
dowell pins, bolt part numbers, alignment and various clutch parts are
described in this video. It's part of an all-inclusive drivetrain tech
piece I'm working on that's broken up into sections to maintain focus on
the individual processes involved.
2000 Honda Civic Si 1.6L Clutch Install
This video is a 2000 Honda Civic Si 1.6L clutch installation with Gary
Croyle. The clutch set used was a part number MU70137-1 (Brute# 92329). An
image of the clutch set can be found at the following link:
The clutch diameter and dimensions are as follows:
8-5/8" Diameter x 24 Teeth x 1-1/32" Hub
This clutch set fits the following vehicles:
ACURA INTEGRA GSR L4 1.8L GAS N 1997-01
HONDA CIVIC DEL SOL VTEC L4 1.6L GAS N 1994-95
CIVIC SI L4 1.6L GAS N 1999-00
CR-V EX L4 2.0L GAS N 1998-01
CR-V LX L4 2.0L GAS N 1997-01
CR-V SE L4 2.0L GAS N 2000-01
Supra nat AEM V1 1st startup
First startup of a 2month long turbo kit
install on a 2JZGE non turbo 1995 Supra.
Idles perfect on AEM startup cal file after small snafu with trans throttle
cable not being adjusted properly.
Fuel system, manual trans swap and professional Dyno tuning coming very soon.
This was just the first step.
Muncie M22 - Z 4 Speed Transmission Installation - Part 1
Paul Cangialosi and Sale Arena from 5Speeds.com install a new Muncie M22-Z
transmission in Sal's 1962 Corvette. These transmissions are designed by
Autogear and are assembled and "Blueprinted" at the 5speeds.com shop. This
is part 1 and shows removal. Part 2 shows installation and Part 3, driving.
So stay tuned for more! Music by The Wrong.
89 Honda CRX Si D16Y7 swap p1
Just some information about swapping a D16Y7 out of a late 90's Civic into
my 89 CRX Si. Reused the original manifolds and transmission from the CRX,
so didn't have too many complications.