Chevy Vortec lifter & valve tap how to repair it
this video has info on how to fix a severe valve tap or sticky lifter using
1 quart of automatic transmission fluid with 4 quarts of oil. the trans
fluid is a high detergent that loosens up sludge build up in a motor from
lack of oil changes, you will be amazed at what pouring 1 quart of trans
fluid in a neglected motor can do. the truck in this video got a double
treatment and now runs smooth with no taps and the check engine light went
out as soon as I started it. also after the second treatment I changed the
oil & filter and the clumps of sludge that were left in it broke down into
the oil from the trans fluid and it flushed it out. I
I realize I bash fram oil filters in this video and any filter wouldnt have
helped in this case because the truck was so neglected any filter would
have pluged up. howerver,,, Fram in my opinion is cheap crap.and over the
years of having hundreads of cars I can honestly say if you have 2
identical engines 1 using Fram the other using Wix or Napa the Fram motor
will die prematurely due to lack of filtering.
How to remove the intake and change the gaskets on a Chevrolet Vortec 5.7L 350.
How to remove the upper and lower intake manifolds on a GM 5.7L or 4.3L
engine. This truck's lower intake gaskets had sprung a leak and I needed to
change it. When changing the intake gaskets, it's not necessary to remove
the upper intake, but I showcased how to do it anyway for people that need
to change the spider injectors or the upper seal.
4.3L 5.3L Chevy Vortec Distributer install
How to properly install a distributer on a chevy 4.3L or 5.3l vortec
engine, even if crankshaft was moved. The timing is not adjustable on these
models so it is necessary to install the distributer in correct alignment.
4.3L Turbo S-10
My buddy marks turbo s-10 at the
Been building for over 3 years, first time at the track, entirely custom
12.5psi, Ford 8.8, caltracs, linelock, MT's. Thanks to my family for
putting up with the late nites in the garage and the loud Exhaust at 1am. Whether we were out beating up
on corvettes or sitting on the side of the road with blown parts, my
friends were there and that has made all the difference.
Coolant Leak (Part 1) GM 5.0L & 5.7L Vortec Engines
Coolant leaks on GM 5.0L & 5.7L Vortec Engines built between 1995 and 2002
can some times be attributed to the stock plastic intake manifold gaskets.
This video shows the replacement of the Intake Manifold Gaskets on a 5.0L
Vortec Engine in a 1997 GMC K1500 Sierra Pickup.
Vortec Throttle Body Modification 5.7 and 4.3
Easy Throttle body modification that increases throttle response and Horse
Power . This is for all 5.7 5.0 and 4.3 Vortecs.
2007 Tahoe 5.3L Engine Part 1 - EricTheCarGuy
Link to full version of this video:
Link to part 2: http://www.youtube.com/watch?v=FLzhR7PO2ak
Visit me at: http://www.ericthecarguy.com/
The first installment of the Tahoe engine video, you might remember this
one from the leak down video. In part 2 I want to cover the highlights of
the swap and I would like the final video to cover the removal of the bad
piston to have a look at what happened to the original engine.
Click below and Stay Dirty
Visit me at EricTheCarGuy.com
Visit EricTheCarGuy Forum
Visit my Facebook Page:
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee
against unauthorized modifications of this information, or improper use of
this information. EricTheCarGuy assumes no liability for property damage
or injury incurred as a result of any of the information contained in this
video. EricTheCarGuy recommends safe practices when working with power
tools, automotive lifts, lifting tools, jack stands, electrical equipment,
blunt instruments, chemicals, lubricants, or any other tools or equipment
seen or implied in this video. Due to factors beyond the control of
EricTheCarGuy, no information contained in this video shall create any
express or implied warranty or guarantee of any particular result. Any
injury, damage or loss that may result from improper use of these tools,
equipment, or the information contained in this video is the sole
responsibility of the user and not EricTheCarGuy.
4.3 vortec exhaust
Its a stock 4.3l v6 with flowmaster super 44 and duals. First day
installed......sorry about the crappy quality
2003 Chevrolet S-10 Xtreme V6 Start Up, Exhaust, and In Depth Review
Hello and welcome to Saabkyle04! YouTube's largest collection of automotive
variety! In today's video, we will take an up close and personal in depth
look at the 2003 Chevrolet S-10 Xtreme extended cab. During this
presentation, we will take a 1st person look at what the vehicle is all
about beginning with the start up, performance data, fuel economy, the
occasional track data, and build quality. Also, I will teach you how to use
most of the interior and exterior features in a detailed fashion, that
before, you could only get from going to a dealership yourself! Throughout
the video, I will highlight key styling and unique differences about the
vehicle, any available options, and of course it would not be an enthusiast
car video without the good ole engine portion with rev and Exhaust note with interior and exterior
perspectives. A thorough tour/review of this car designed to give others a
greater overall appreciation of the vehicle.
FOR MORE INFORMATION ABOUT THE CHANNEL SEE BELOW: In this channel you will
find in depth reviews/tour of automobiles from all over the world,
presented in a more detailed fashion than ever before. Basically, this
gives the viewer the chance to view the most detailed 1st person look you
can get without going to an actual dealer yourself! Every video is
consistent in the way I present so viewers know what to expect in my
presentations. I treat every vehicle with the same respect whether a 1960
Chevrolet Impala SS or the 2012 Lamborghini Aventador. I film all types of
vehicles from past, present, and future while broadening the knowledge of
the automotive enthusiast. You will see everything from vintage, brand new,
exotic, mainstream, old, etc. I am very proud of this channel and have
built it up from amateur videos years ago to what you see today. I wanted
to share my love for the automotive world with the rest of the world. Be
sure to explore the massive video variety, have fun and enjoy The Driver's
Seat of YouTube!
FIND ME ON THE OFFICIAL SAABKYLE04 FACEBOOK PAGE FOR CONTINUOUS UPDATES ON
WHAT'S TO COME AND INTERACTING WITH OTHER FANS!