This is a photo/video journal of the build of my brother's chevy s10. The build is our first attempt at a project of this caliber. We did this build in October 2011 in northern Colorado. The pictures and video were taken on an IPhone 3GS. Editing was done with Splice application on said phone. The truck is still under construction. It is totally drivable, but a step notch will be installed spring 2012.
2005 bagged out Chevy colorado. I read a few of your comments and i thought
id give u guys a lil better description. So here it goes; FBSS layin frame
on 22" milanni kool whips. The suspension is sittin on 2600s in the front
and 2800s in the rear, all 450psi slam specialities HE series. Im runnin
1/2" airline through GC 450 extreame valves at 200psi with 2 viair 480c
compressors on a 7 gallon tank. Its got tubular upper and lower control
arms with 2" drop ball joints in the front. In the back, a monster
tringulated four link with super pivots and its bagged on the bars. Hence
the 2ft of lift in the back. The rearend has been cut dwn about 2" to get
it to tuck the 2s. I built this in my dads garage with a grinder, a saw
zaw, and a welder. Special thanx to my boys that put in the long hrs wid
me. I love lowriders so if u got any questions email me
firstname.lastname@example.org. I appreciate the comments and i kno haters gonna
hate. Its ok u can hate on me:)
My Bagged & Bodied 2005 Colorado ZQ8
My daily driver, 2005 Chevy Colorado ZQ8. All of the footage was taken
with my cellphone- I know it sucks haha. Just playing around with some new
Music is "The Regulator" by Clutch. You can find it on the "Blast Tyrant"
album. Copyright DRT Entertainment. Check these guys out!
Ladder Bar system & Test Drive [S3-Ep.5-1]
If you've been around cars and trucks very long, you know that vintage,
nostalgia, and rat rods are very popular. The question is, how do you make
a nostalgia-style car with leaf springs hook up like a modern drag car but
not lose the vintage look? Simple...you install a ladder bar system! But
how do you keep the leaf springs from binding you ask? Ah...there is a
special way to do it, and if you want to find out what it is...you need to
catch this episode of GearZ. Then it's out on the road to test it out as
Stacey shows you just how much fun you can have with a nostalgia-style
vehicle. Would somebody please bail him out of jail?!?!
Chevy S10 Xtreme Bagged
Chevy S10 Bagged featured by French Canadian VDO
Special Thank to The Falling Trance:
rear air bag setup
rear 4 link on my mazda, slam re bags, Z'ed frame no step notch, and floppy
Exhaust rattling that hasn't been
pulled off yet
bagged on 24s, lift at 125 psi
Wheels/Tires for sale!
Gianelle "Spezia 6" 24x9 wheels with Pirelli pzero tires. Rear tires are
285/30/24 and front tires are 255/30/24. Distance from mounting surface to
outside of wheel is 6.5" with a 9" wide wheel = -1.25" offset. Bolt pattern
is 5 on 4.75; these were purchased for my 2003 chevy s10 project truck.
Chrome wheels for one side of the truck and black wheels for the other (you
can only see one side of the truck at a time). The truck has been sitting
unfinished and I'd like to sell the wheels/tires. The tires have about 100
yards on them, the truck was never driven with the wheels/tires mounted,
only pushed a couple times on/off a trailer at car shows. The tires still
have the little nubby things on them from being new. Wheels are in
excellent shape, they were mainly used for mock-up when building
suspension. Wheels will need to be balanced as the balancing weights have
come off. I paid $5,300 for these and asking $1200 FIRM + shipping. Wheels
will fit GM 5 lug vehicles 5x4.75 or 5x120.65 bolt patterns.