Mustang Front Suspension Installation Forgotten Fastback 1965
In this installation video, Bill demonstrates how to upgrade a front
suspension in CJ's 1965 Forgotten Fastback project car. Before the upgrade,
the Forgotten Fastback's suspension was beyond poor, with two 4x4s for
springs and several loose parts.
In order to make the Fastback a Mustang with modern updates, we've
decided to install a stock-style suspension with a few performance
upgrades, which will provide a better handling experience. For springs,
upper and lower control arms, and a strut rod kit, we've chosen top-quality
products from Scott Drake.
Mustang Scott Drake Coil
These springs allow your Classic Mustang to take advantage of the
latest suspension technology and perform more like a modern sports car.
They provide a fairly stock smooth ride during normal driving, but as the
springs compress under load (primarily during braking and cornering) they
progressively become firmer to offer the handling characteristics similar
to our 600 pound performance springs.
Mustang Scott Drake Lower
Control Arm Assembly 1965-1966:
These lower control arms are the finest available and feature the original
riveted design for a more authentic look. They are painted black and
natural steel gray and come with a ball joint, grease seal, a washer and
nut and a cotter key.
Mustang Scott Drake Upper
Control Arm Assembly 1965-1966:
These upper control arms are the finest reproductions available and are not
rebuilt, but rather all new. They're painted black and natural steel gray,
come ready to install, and include the bushings, ball joint, but with
cotter key and washers with locking nuts.
1969 Mustang Coupe Restoration
This is a re-make of the original video. I had more time to include more
pictures and better narration....that and YouTube pulled the old one for
The JET Bicycle - The most dangerous unsafe bike EVER
An old womans bike built for shopping turned into a bomb inspired safety
hazzard. This is the final part in my series on the wonderfull pulse jet
and what an end.The jet will push the bike a little faster but its staying on thats the
challenage as some of the more keen eye'd people will have noticed the side
shaking , yes we could have cured it with better frame better wheels etc
but i like its a shit bike n still is.
Other videos in the series are
Part 1- Making the jet
Part 2- First test
Part 3- Strapped up in van and nearly setting fire to everything
Part 4- Making the jet bicycle
also follow me on twitter https://twitter.com/colin_furze
and my facebook page
For more info on this project and other crazy ones like it visit my website
Contact me either here on youtube or at firstname.lastname@example.org
Music by march to the grave heres the link etc
how to check your fuel pump
Quick and easy way to trouble shoot your fuel pump, First thing is to make
sure you have gas in the tank !! Then watch the video as i walk you through
the next steps.
2002 Ford F-150: Replacing the Fuel Pump
This video documents the process to replace a fuel pump in a 2002 Ford
F-150. Please note there are some minor variations based on wheelbase.
These instructions can also be widely applied to most Ford vehicles as the
process is similar for most.
Boss Nine Engine [S4 Ep12-2]
Today on GEARZ, Stacey takes a look at one of the most incredible engines
that Ford ever built, the boss 429. But instead of leaving you WISHING you
could have one, he shows you where you can actually GET one... the
legendary Jon Kaase. After that he rolls the V8 Interceptor, Cougar back
into the shop and gives you 780 reasons why this car is called the
Interceptor. With all that new-found room under the hood. Stacey stuffs in
a 520ci, 780 horsepower, Boss Nine engine
and a 6speed manual transmission to back it up. If you didn?t think modern
performance parts would fit in a classic muscle car, this show proves they
can! But there's more to it than that, it's the rebirth of Ford's hemi and
finally an answer to all those Ford fans who have wondered what could have
been if the Boss engine had continued. The Boss V8 Interceptor is in the
Jay Leno's Garage: Custom 1969 Ford Mustang Fastback
Subscribe NOW to Jay Leno's Garage: http://full.sc/JD4OF8
Jay's neighbor Bodie Stroud stops by the garage with his latest and
greatest: a chopped, widened fastback featuring one of ten 494 all-aluminum
BOSS engines, originally made for (and signed by!) Mario Andretti in 1969.
Holy burnout, Batman!
Check out the Official Jay Leno's Garage Site for more:
Get more Jay Leno's Garage:
Jay Twitter: http://twitter.com/LenosGarage
Jay Facebook: http://www.facebook.com/jaylenosgarage
Get more NBC:
NBC Twitter: http://twitter.com/NBC
NBC Facebook: http://facebook.com/NBC
How to build a TURBOJET ENGINE
HELLO GEEK WEEK
So this is the first in my trilogy of videos about building a turboJET engine from scrap.
This video is me building the jet then tomorrow i'll take you through the
simple maths and it is simple.
enjoy subscribe and see you next video.
Music by march to the grave
The scrapyard is C.towell and they are great for off cuts of stainless etc
PLUS more at
How an engine works - comprehensive tutorial animation featuring Toyota engine technologies
Animation I created for Toyota that gives an overview of the components of
an engine, how an engine works and some of Toyota's valve, intake and Exhaust technologies. I wrote, directed
and storyboarded the video. It was for training purposes only.
See other videos at: