DIY: Wrapping Rims in Matte Black Vinyl
I wanted to try a new style for my winter rims, and instead of pinting them
i wrapped them in vinyl, Costs about $10 a rim.
http://www.ebay.ca/itm/321097538225 This short video shows you how to wrap
a rim quickly(sped up 3x), There really is no downfall to doing this, faster and cheaper then painting, the
vinyl only weighs .4 ounces or about 50 grams. and thats spread out
throughout the rim and if you dont like it then just peal it off. If you
want more info or you want to buy some vinyl contact me at
email@example.com Or come contact me at 8thcivic.com please don't send a
message though youtube, I don't come here often.
Check it out on ebay for the full written DIY.
Or visit my ebay page at
and scroll down to Matte Black Vinyl Rim Wrap 6x 24"x24"
Also the first song uses is a
-rusko remix its rusko hold on sub focus remix, the second song is
-supersonic the world of discotronic and the last song is the classic
-chemical brothers hay boy hay girl with a dunstep remix.
1999 Honda Prelude 5-spd Start Up, Exhaust, and In Depth Tour
In this video I give a full in depth tour of the 1999 Honda Prelude. I take
viewers on a close look through the interior and exterior of this car while
showing details, over viewing of features, and noting unique styling cues
to the vehicle itself. I also show the engine and the details of it, start
it up and see how it sounds under acceleration. A thorough tour/review of
this car designed to give others a greater overall appreciation of the
Honda Prelude Walk around *New*
Here is a newer walkaround of my 2000 Prelude. Getting some different
shots at dusk. The car has HID projector headlights with angel eyes. Also
has HIDs in the fog lights. 2.5 in Exhaust from the header all the back. The
header is a hytech replica. Tinted out the bumper lights and part of the
My jdm honda prelude type S- updated!
Mods: skunk2 pro stage2 cams, retainers and pulleys
tein superstreet coilovers front and rear
dc sports manifold, jap speed decat pipe, skunk2 Exhaust system
auto-manual tensioner conversion, AEM v2 air intake,70mm
matching ported intake manifold. Apexi afc neo- mapped on Dyno-245bhp
Ap2 s2000 clocks fitted, DC5 integra steering wheel, Razo
Tenzo R gear knob, billet aluminium locking nuts, Budyclub P1
Pager alarm system with remote start, reverse camera, Pioneer
avic 900 dvd.
HKS speed defender, and HKS fuel cut defender.
How To Do A Valve Adjustment On Your Honda Prelude H22 BB6
Knowing how to do a valve adjustment can save you a lot of worry and
headache. The Honda Prelude is known for its H22 engine. Taking care of the
H22 will provide you with years of reliability and performance.
Doing routine valve adjustments will keep your car running at peak
performance. The H22 2.2 Liter VTEC engine can also fit into other cars as
well, so even though this video is for a Honda Prelude BB6, if you have a
H22 then this video is for you.
This is a complete H22 valve adjustment guide with valve cover gasket
Nathan Riddle - Black
Nathan Riddle - I can do better
Nathan Riddle - Reptile
Nathan Riddle - Mei-Yuen
Niki Kofman - Moonlight
Niki Kofman's channel: http://www.youtube.com/user/NKofman
ONLY ADJUST VALVES WHEN THE ENGINE IS COLD, or less than 100 degrees
Fahrenheit or (38 degrees Celsius) .
Intake: 0.15 - 0.19 mm (0.006 - 0.007 in)
Exhaust: 0.17 - 0.21 mm (0.007 -0.008
Valve Cover torque specs: 8.7 lbf-ft
Ignition wire cover: 7.2 lbf-ft
Alternator Terminal: 6 lbf-ft
After adjusting the valves torque down the crankshaft pulley bolt to 245
N-m (181 lbf-ft)
07JAB-001020A Honda pulley bolt holder handle
07NAB-001040A 50mm Holder Attachment
Tools you'll need:
***Valve adjustment tool: 10mm***
1/2 inch ratchet
3/8 inch ratchet
1/4 inch ratchet
1/2 inch long extension
1/2 inch medium extension
3/8 inch long extension
3/8 inch short extension
1/4 inch short extension
3/8 inch Torque wrench that starts at least 20inch pounds
1/2 inch 19mm deep socket
3/8 inch 5/8 inch spark plug remover socket
1/4 10mm deep socket
1/4 10mm standard socket
1/4 8mm standard socket
Honda liquid gasket
Valve cover gasket with washers and seals
Canon T2i 24-70 2.8L