Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

Painting Interior Plastic Parts

A LabJapan - CustomSprayMods Collaboration Lucas sends Dave his interior parts Dave paints the interior plastic parts and goes through the steps involved preparing, priming, painting and clear. Check out Customspraymods http://www.youtube.com/user/customspraymods Music by Kevin Macleod http://incompetech.com All products available at VG Auto Paints http://www.vgautopaints.com.au


 


More Videos...


DIY- How To Paint Your Car Interior In 10 Steps
1. a. Prep Clean Part With Warm Soapy Water b. Prep Wet Sand With 800-1000 Grit Sandpaper c. Let The Part Compelety Dry For A Hour 2. a. First Coat Of Primer Make It Light b. Second Coat Of Primer Make It Meduim c. Last Coat Of Primer Make It Heavy But Watch For Runs 3. a. Sand The Primer With 800-1000 Grit 4 a. First Coat of Paint Make It Very Light Just Enough To Make Spots Hold Can 12 Inchs Away From Part b. Second Coat Of Paint Make It Light After This Is Done You Should Still See The Color Of The Primer c. Thrid Coat Swipe Paint Across The Part And Now You Should See No Primer d. Fourth Coat To Etc. Coats Swipe Paint Across Paint Lightly 5. a. Clear Coat Stage Spot Your Clear On Your Part Lightly b. Repeat Atleast 5 Times After The First Coat You Can Spray A Little Thicker 6. a. Extra Stage You Can Grab You Some Good Wax And Put It On Thick To Protect Your Part Better 7. a. Designs Or Logos- You Can Apply A Smily Face Sticker On A white Piece b. Paint That Part Black c. Remove The Sticker And The Face Will Be White d. Look On Google For Logos Or Letters e. Print And Razor Blade The Logo or Letters Out 8. a. Tips- Wait Atleast 10 Mintues In Between Coats b. Tips- Do NOT Move The Part After Painted c. Tips- Shake Can Before Use And Clear After Use 9. a. TroubleShooting- Clear Is Dull= The Weather Is To Hot or Cold Need Between 70-80 Degress b. TroubleShooting- Paint Is Running= Your Holding The Can To Close To the Part c. TroubleShooting- Paint Cracked or Bubbled= The Part Was Wet d. TroubleShooting- A Bug, Dust, Or Grass Fall On My Fresh Paint= Let Cure A Full Day And Wet Sand With 1000 Grit 10.a. Curing The Paint- Wait Atleast 4-5 Days After Last Coat Of Clear Is Appiled b. CUring The Paint- Make Sure It Is In A Warm Area





how to paint your car interior
Some parts of the video are really quiet, so turn it up. And I used krylon true blue it really pops





How To Recover A Dashboard
TheCousinDan shows you how to recover a dashboard with new vinyl. Restore old cars and trucks with this handy skill!





How to make simple carbon fiber panels
This video shows the basics of carbon fiber lay up, step by step for vacuum bagging. Take a look, leave feedback and ask any questions you may have. Resources to buy your own carbon products can be found in the buyers resource section of TheFabForums.com





Sculpting Car Interior Dash with Chavant Y2-Klay - Bailey Blade XTR - Part 69
Follow the progress with daily updates on FaceBook http://on.fb.me/BXRFaceBook Join forums to discuss car building and design techniques. - Car Designer and Builder Forums: http://bit.ly/BuildDesign - Keep Updated Via your Android Phone, install my new Android App: https://market.android.com/details?id=com.andromo.dev1113.app974 - View the complete list of build videos: http://bit.ly/BladeXTR2 - Official Website: http://bit.ly/BXRMotors - Follow us on Twitter: http://bit.ly/TwitBlade





Repairing and retexturing a Ford Explorer bumper cover
This video demonstrates, from start to finish, how to repair a textured plastic bumper cover using a hot air plastic welder. After the plastic welding is complete, the dents and low spots in the bumper are filled with epoxy filler which is then sanded down to match the original contour. The bumper cover is then retextured with MicroTex texture material from Urethane Supply Company. Finally, the bumper cover is painted with Bumper and Cladding Coat so that it matches the original color. These products are available at http://www.urethanesupply.com





GrafiWrap Car Wrapping Tutorial 2013.
GrafiWrap, Grafityp Selfadhesive Products. Car wrapping tutorial 2013, tips and tricks. Full High Quality wrap from cars, vans, ... with GrafiWrap automotive and Deco films + printed films





Spray on Chrome with the Gemini Chrome System
http://www.hardlifestyle.com HARD LifeStyle takes a Star Wars Darth Vader Helmet and turns it into a highly reflective 100% chrome finish right before your eyes.





How To Body Work and Paint Plastic Auto Parts Yourself (SEM)
How To Paint Plastic Car Parts (aerosol bumper paint) Blog: http://www.learnautobodyandpaint.com/blog/how-to-paint-plastic-car-parts/ Get a FREE 90 min auto body DVD here: http://www.learnautobodyandpaint.com/freeautobodydvd/ In the video above we tackle the most common fix in the industry. You know when you see those ugly faded plastic bumpers right? Well, there are 3 ways to fix this eye sore. 1st. you can try to scrub them with some car soap or degreaser and wash the oxidation off. 2nd. you can buy a solution they sell (like a basic rubbing compound) which works well, and just rub it out. Some ppl use peanut butter! I personally think that's a little wacky but whatever floats your boat. I'de rather use come compound. the same compound that you'd use to buff your car. 3rd. If the bumper really looks bad (Paint It!). That's what we've decided to do in this 7 minute video above. Keep in mind that this job was a QUCKIE. We didn't bother to fill in the minor scratches with glaze putty that were on the rear bumper cover. Good thing. Because I found out that the truck was backed into something a week later and got ruffed up even more. The first step to painting plastic parts is to properly clean your plastic. I prefer lacquer thinner. REMEMBER: there us a difference between 'paint thinner and 'lacquer thinner'. You want to use lacquer thinner. Next, pick some cans of SEM bumper coater. It's good stuff and they also have a formula now where you don't need to worry about adhesion promoter (stuff to put on the plastic so your paint sticks). Mask. Take your time and do a good job. Prep is the most inportant part of painting. If you do a crapy job masking, the job will look like hell. You can lightly wet sand your plastic with 600 grit if you wish but I wouldn't go any courser. The bumper paint is thin and you may have problems covering. As long as your parts are washed well with lacquer thinner you're safe to paint directly on your plastic bumper. Spray 2-3 coats or until full coverage. ...and that's basically it. Hope you enjoied this post. Feel free to comment and share this post. We would love to hear back from you! See What Our VIP Training & Community Can Do For You: http://vip-offer.learnautobodyandpaint.com/ Get A Free 85 Page Auto Body & Paint Manual + 7-Day Video Boot-Camp Access Here: http://www.learnautobodyandpaint.com/ Connect on Facebook for More FREE Updates: https://www.facebook.com/learnautobodyandpaint Connect on Google Plus: https://plus.google.com/+HowToPaintYourCar/posts Check Out Our Recommended Gear: https://www.learnautobodyandpaint.com/store/





vinyl door panel repair using heat
complete demo using heat method for door panel repair.





How to build a custom center console
Tim at Steve Holcomb Pro Auto Custom Interiors shows me how they make there custom center console..very good information...check it out!!





Plasti Dip Silverado Interior Part 2 (Follow Up)
http://youtu.be/sTaoDLQrG5s - Follow up video 2 and a half months after I Plasti-Dipped my Silverado's interior.





How To Smoke Tail Lights Yourself
How To Smoke Tail Lights Blog: http://www.learnautobodyandpaint.com/blog/how-to-smoke-tail-lights/ Get a FREE 90 min auto body DVD here: http://www.learnautobodyandpaint.com/freeautobodydvd/ Learn More! Check out our AMAZING VIP Auto Body & Paint Community Here: http://vip-offer.learnautobodyandpaint.com/ In this short video we'll show you how easy it really is... How to smoke tail lights yourself. Basically, all you have to do is sand your plastic lenses with 1500-2000 grit sand paper. Preferably wet sand. You'd just get a better cut with wet sanding. Now, some say you need a adhesive promoter... I think it's a bunch of crap. As long as you sand your lens, you wont need it. See What Our VIP Training & Community Can Do For You: http://vip-offer.learnautobodyandpaint.com/ Get A Free 85 Page Auto Body & Paint Manual + 7-Day Video Boot-Camp Access Here: http://www.learnautobodyandpaint.com/ Connect on Facebook for More FREE Updates: https://www.facebook.com/learnautobodyandpaint Connect on Google Plus: https://plus.google.com/+HowToPaintYourCar/posts Check Out Our Recommended Gear: https://www.learnautobodyandpaint.com/store/





How to Recover Your Dash - 1973-1987 GM Truck
Video showing how to recover your cracked car or truck dash for around $40. I covered my 1982 GMC truck dash with pretty good results. It is not even close to being perfect but it is MUCH better than when I started! . LET'S CONNECT! God's Country's Accounts: - http://gplus.to/GodsCountry - http://www.facebook.com/godscountrychannel - http://twitter.com/In_Gods_Country





Broken Dash? No Problem!
Repair of a broken dash on a Silverado Pick up. Reinforced top and bottom for strength and color blended for proper color match. A repair like this saves hundreds of dollars over replacement.




Which car is faster? Which Car is Faster?





Similar 1/4 mile timeslips to browse:

1972 Mercury Comet 2 door: 8.934 @ 150.130
Rick Porter, Engine: 351 Windsor (all motor), Tires: MT 32x14


1972 Mercury Comet : 10.793 @ 123.320
Matthew Bong, Engine: ford , Tires: goodyear 28x10x5 slicks


1962 Mercury Comet : 10.920 @ 132.560
koty sanders, Engine: stock 223 straight six, Supercharger: none Turbos: none


1973 Mercury Comet : 11.520 @ 115.000
Rick Cooper, Engine: 306, Tires: 275 Mickey Radial Pro


1966 Mercury Comet Cyclone: 12.217 @ 110.200
Charles, Engine: 390 Ford (.030 pistons 10:1), Tires: Goodyear 28 X 10.50 (9.00)


2005 BMW 545i Sport: 13.338 @ 106.110
David Soucia, Tires: Blizzak winter 215/50


2004 BMW 545i : 13.644 @ 103.220
Grogan, Tires: Goodyear RSA 225/17


2005 BMW 545i Sport: 13.700 @ 104.100
NA,


2004 BMW 545i : 13.800 @ 103.300
NA,


2004 BMW 545i : 13.800 @ 103.200
Daddy, Engine: 4.4l,


2004 BMW 545i : 14.100 @ 103.000
NA,


2005 Buick LaCrosse cxs: 15.585 @ 89.630
Matt D,


2005 Buick LaCrosse CXS: 15.800 @ 90.700
NA,


2010 Buick LaCrosse CXS: 15.810 @ 90.310
NA, Engine: V6: 280HP,


1967 Mercury Comet 202: 17.426 @ 86.590
.954, Engine: 302, Supercharger: N/A Turbos: N/A Tires: 205/60/14 - 225/75/15


 


©2014 DragTimes - Disclaimer