Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

Rossnemo Racing Yamaha FZR Hydrodrag Race Boat

Yamaha Waverunner Hydrodrag ready FZR built by Rossnemo Racing. Fully ported and cammed engine, CP 9.5 pistons, K1 4340 H beam rods, Engine Tech Supercharger, Full Competition Exhaust, Vipec, Rotax 160mm pump, custom crankcase evac system..


 


More Videos...


My GPSHO Conversion Build
This is the making of my GPSHO conversion ski as well as the first couple of passes of its maiden voyage.





Yamaha FZR drag racing a Sea-Doo RXT-X
Impromptu drag race pitting the Yamaha FZR against the Sea-Doo RXT-X. The Yamaha FZR won soundly.





Riva Racing 400hp Turbo Kit for the Yamaha 1.8L Engine
Riva Racing is now selling a 400hp turbo kit for the Yamaha 1.8L engine that powers the high-performance FZR, FZS, VXR, VXS as well as the luxury-performance FX models.





Riva 310 HP Kit for the Yamaha 1.8L Supercharged SHO Engine
Riva Motorsports offers an aftermarket kit that increases the horsepower of the Yamaha 1.8L Supercharged SHO Engine to 310HP. The Yamaha SHO engine is available in the Yamaha FZR, FZS, FX Cruiser SHO and FX SHO WaveRunners. Riva's Dave Bamdas explains how the kit works.





Rossnemo Racing Superstock Alcohol FZR Shakedown cruise
3rd time out running E85 fuel. Dialing in the vipec ems fuel map. Have it rerally close, but running it on the rich side to be safe for now. WOT AFR ratios are from 11.1-11.6. Will close in on the 12.2 target soon. Accelleration is well, very very good. :) As you can see, water conditions sucked with wind, waves and lots of other watercraft traffic. Top speed tuning and testing coming soon on flatwater.





Rossnemo CF-XLT-SHO Yamaha Ride with Big Bertha
Rossnemo CF-XLT-SHO Telemetry cam.. Rotax 16 vane 160mm pump with 15-25 pitch impeller and 87mm nozzle. Pump HOOKS up! Worlds fastest and quickest XLT...





H2Oxtreme Yamaha Turbo Kit
turbo kit for FZ, SHO, VXR





jet ski true dual exhaust RXP
jet ski true dual Exhaust RXP





Yamaha FZR SHO 400HP+
A modified SHO stage 3 conversion 2010 model on normal pump gas (93RON) and no ecu mods done all home baked! put that in ur pipe ! I roughly measured the acceleration speed at 0 to 82 mph at 3 sec ,mods done to improve handling stock pump but new Riva Racing impeller. The 1/8th mile in about 6 seconds ! We have done a hundred hours on this ski and it still has not given any problems ,build to last!





Julio's exhaust on yamaha fzs waverunner
Home made Exhaust system utilizing the RIVA free flow Exhaust tube with a custom made Exhaust TIP.





2012 Yamaha Sho Monster Jet
2012/04/15 Kurume Fukuoka Japan 145km Boost 19.5psi Fuel 48.5pound Injector 625cc Impeller R&D Pro Pitch 13/25 Cam R&D RC1 Racing elf PERFO 105 RON 113 / MON 98 ??????????????????????????????????????????????????????????????????????





Sea-Doo Watercraft Safety Video
http://www.sea-doo.com Know before you go! In this video you will learn a lot of valuable tips and information about your new personal watercraft. This informational video is a must see before you head out to the water the first time.





Testing out the new Yamaha FZS Waverunner
2011 Yamaha Waverunner FZR - Supercharged I max out around 73 in the video.





H2O Turbo FZR
87.1 @ 18PSI @ 8400 RPM





Rossnemo Superstock FZR testing
Testing new 1700 cc bosch compressed natural gas injectors running with E85 fuel. Final Vipec ECM fuel mixture map tuning puts injector duty cycle at 85 percent at WOT. (wide open throttle) with 52 psi fuel pressure. Perfect. This pass was 91.5 mph in hot tampa summer heat. 06-30-12 Previous pass was 50-75 rpm faster which equates to 1 more mph. Previous pass was just a tad leaner on fuel at 12.8 AFR. This pass was 12.3 AFR. (air fuel ratio). Putting it back to 12.8 of course! :)





Which car is faster? Which Car is Faster?




Similar 1/4 mile timeslips to browse:

1988 Yamaha FZR 1000: 10.770 @ 128.800
Rusty, Engine: 1000cc, Supercharger: No Turbos: No Tires: Metzlers


1994 Yamaha FZR 600: 12.389 @ 112.210
Taylor, Engine: 599cc,


 


©2015 DragTimes - Disclaimer - Contact Us