Little Gabriel PMS R-100 - 7.34 @ 150 MPH
Video Del Mazda R-100 Little Gabriel de PMS Race Cars en San Lorenzo
establecer 7.34 @ 150 MPH con 1.02 en los 60, 2.89 en los 330' y 4.47 en
los 660' (1/8 milla)
Video Bye- http://www.grs-motorsports.com/index/index.html
Spring Nationals Video Mix By: Silvestre (GRS Motorsports)
Video Mix By: Silvestre (GRS & Loco Cam)
Videos By: http://www.grs-motorsports.com/index/index.html
Team Que Estare Representando A La Isla Del Encanto Seran: El Graduado
(Gomera El Cano) , Lazcano Racing 350Z , Pica Motors Imports (Mazda Rx7) ,
El Yankee (Mazda Rx8) , El Humilde (Toyota 1.6) , Gemelos Towing (Mazda
Rx8) , Geohimer Racing (World Fastest Modified Compact Mazda Rx8) & The New
Ian (Mazda 6)
UPDATE!! 1997 nissan s14 kouki sr20det build (part2) with dyno video!
*skip to 18:18 to see video of the car running
*skip to 24:53 for Dyno video
so after my last video the car ran good for about 2 weeks. long story
short, the tune that my last shop did set my motor up for detonation so
cylinder #1 dropped a significant amount of compression. the other 3 did as
well but not to such a degree.
it took me around 7-8 months to gather enough money to go with forged
internals rather than OEM.
i was on the verge of purchasing all the parts when i came across what i
thought was too good to be true.
someone in north carolina had a nice 1996 nissan 240se shell and fully
built block for sale. he was asking right around what it would of cost me
to rebuild my motor and considering i was getting a entire car and many
aftermarket parts with it, it was a no-brainer for me... I WAS SOLD!
here are SOME of the parts included with the 1996 240 shell:
-Freddy intake manifold/$140
FULLY ASSEMBLED BLOCK (BLUEPRINTED AND RACE BALANCED)
-9:1 forged cp pistons $470
-Brian crower 1200hp "I beam extreme" 19mm GT-R +625 ARP hardware/ $630
-ACL race rod and main bearings /$121.60
-nissan thrust washer /$12
-B&M short shifter/$200
-Megan turbo elbow/$55
-stock inj w/ fuel rail/$80
-Intercooler and piping/$140
-t25 stock turbo/$100
-sr20 stock maf/$45
-sr20det stock oil pan/$30
-winning specialties harness/$200
-stance rear upper control arms
-stance coilovers/ $1000
-greddy blow off valve
-turbosmart Boost controller
and some other stuff..
picked it all up and the rest was history.
car made some healthy numbers after everything was dialed in, the head will
get built next and them I'm gonna be going for 450hp so subscribe for
hope you enjoyed and thanks for watching
Dyno tuned by rolo at
CFT turbo in orlando
Video Anais En 2 Gomas Despues De Los 60ft (Slow Motion)
Video By: http://www.grs-motorsports.com/index/index.html
Video en donde la Toyota Starlet La Anais se va en 2 gomas despues de pasar
los 60 pies de la Englishtown Raceway Park el 30 de Julio 2012 en la 2da
ronda de cualificacion ante la Gisela
Nissan Silvia S14 200sx SR20DET dyno run Link g4 Plug-in ECU 195kw on 15.1psi
Factory Standard motor SR20DET first time on Dyno fully stock tuned with link
g4 plug and play on BP98 195kw on 15.1psi. Standard ECU manage to juice out
166kw on 18psi. Link helped lower Boost and increase power by 29kw with no other
bits changed but stock ecu to link. Cons was the wastegate wasnt holding Boost consistently or could have hit
200kw on factory motor.
List of mods:
HKS 3inch turbo back Exhaust
Mid mount Intercooler
Walbro 255 Fuel pump
Greddy Profec b Boost controller
STD 370cc injectors
Tial wastegate 38mm plumbed back
Big thanks to John at N.S. Spec Motorsport for the tune!
2012 CUSTOM GSX-Rs CUSTOMER RIDES VIDEO MIX
DANIELO POLISHING & PERFORMANCE #1s IN GSX-R POLISHING PERFORMANCE &
CUSTOMIZING,REDLINECYCLEZ.COM #1s IN 3D BILLET DIAMOND CUT 3PLE CRHOME
GSX-R PARTS & ACCESORIES,2012 COAMO SAN BLAS MARATHON CUSTOM GSX-Rs
CUSTOMER RIDES VIDEO MIX FROM THE OASIS CAFE BIKE STOP COAMO,P.R.