Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

Acura RSX VS WRS STI exhaust comparison

compared my friends STI to my RSX, his is pretty bone stock except an aftermarked catback system (dont know what type) Im running a Rotrex C30-94 Supercharger system, with a DC-race header, catless thru 2.5inch piping into an HKS muffler


 


More Videos...


Supercharged RSX Type S progression
this is a progression video of my RSX in the summer of 2010 includes spedo shots autox and much more all shots were taken in mexico





STi vs Evo IX
Record Holding Stock turbo STi vs E85 GT35r Evo 9





Acura RSX Stock to Supercharged Progression
A video that explains all of my steps towards supercharging my Acura RSX





We use our loud exhausts for a purpose
Nissan GTR's revving and popping in Central London.





WyoTech - RSX-S vs STI
my 2002 rsx type s vs a STI





Honda Integra Type R DC5/Acura RSX
Small collection of video and pictures of my JDM Honda Integra DC5. Footage taken by ChrisCW on WarwickshireModified.co.uk





Mikey's Turbo RSX
"It's slow..."





Honda Integra Type R DC5
Honda Integra Type R DC5 220bhp 2.0 litre 4 cylinder DOHC i-VTEC I chat with the owner about this car.





Acura RSX vs Subaru WRX
8TH MILE DRAG RACE CSCS Racing event in Cayuga Aug 21st 2011





MagnaFlow Exhaust Installation - 1996 Acura Integra - etrailer.com
http://www.etrailer.com/tv-Magnaflow-install-1996-acura-Integra.aspx Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information. Today on this 1996 Acura Integra we are going to install MagnaFlow Exhaust part number MF15653 from MagnaFlow Performance. First off we will give you a sound test of the original Exhaust on there. Then we can compare it to the new one once we have it installed. First we will show you what is going to get replaced in our Exhaust system. Basically this is what is called a Cat-back or from the catalytic converter on back to the tailpipe. This is our converter right here and at this flange point we are going to unbolt right here and from here on back is going to get removed from the vehicle. On the bolts themselves we sprayed down with some penetrate and let it sit for at least an hour or so. The nut on the top is going to be a different size nut also. Leave that alone for now. 00:50 If these break we do not really care because this is all getting replaced anyway. Get this apart. Next spray down the rubber hangers with some more lubricant and we will pry them off. We do not want to damage the rubber hangers because those are going to get reused. The same thing is going to happen again with the muffler. Now if these hangers are already damaged from normal wear and tear you probably want to just replace them and this is going to be the best time to do it now. Now we have got our Exhaust completely off. What we are going to do is take any leftover hangers that had stayed with the Exhaust and remove those and put them back into the factory locations. 01:35 We are going to start installing new parts working our way from front to rear. We are going to slide on a new part. We are going to reuse the original factory nuts. We are just going to start one and get it started and hold everything into place and then we will slide on the rubber hangers. We will run all of these bolts down evenly and then give them a final torque. Working with the next section is going to S curve. Install the clamp, slide it on, and slide this on to the resonator pipe that we just installed. This does not really have anything to support it but the other half so we are going to slide it on for now. The approximate location of the original. Install the muffler and tailpipe and slide that into place. We will hook these up to the rubber hangers by the bumper. Put the S pipe next to the tailpipe itself. There is a little gasket that will go on here. Slide it into position and run the bolts through. This is hardware that does come with the kit and install the flange nuts. 03:28 Position the pipes the way that we want it and make sure it is not rattling up against anything that we do not want it to. Then once we have it the way we want it we will snug down the connections. The last thing we will do is tighten down the band clamp and that requires a specific torque range that is provided in the instructions. With our Exhaust fully installed the only thing we need to do now is turn the engine on and see what we get for sound. At about 20 to 50 miles, you probably want to go back underneath the vehicle again and make sure all of the fasteners are still tight. That sounds pretty good. There you have it for part number MF15653 from MagnaFlow Performance Exhaust.





my rsx on low boost 10psi
sorry for the shitty shooting..jus somthing i did leaving the car wash





My Turbo DC5 (RSX-S)
just a video of my RSX-S and my friend's Supra. I do not encourage anyone to hit 160mph. Race at your own risk and be safe. thanks for watching.





Acura RSX Stock Exhaust to HKS Hi Power Turbo Exhaust
This is my 1st mod for my 03 DC5. More mods to come.





2006 Acura RSX Type-S | Stock vs Greddy SP2 | Exhaust video
Here's a video I took of my 06 Type-s the morning of the SP2 install. I took video footage before I drove to the shop and then after the SP2 was installed. I tried as much as I possibly could to make the only variable the Exhaust itself, which is why I did it on the same day, on the same road, almost the exact camera angles. I hope this helps anyone out there in there Exhaust decision making. The mods on the car during the filming: Fujita F5 Cold Air Intake Hondata Reflash Stock Exhaust & then Greddy SP2 catback Thank You





rsx tray drifting
rsx tray drifting





Which car is faster? Which Car is Faster?




Similar 1/4 mile timeslips to browse:

2002 Acura RSX Type-S: 11.408 @ 114.760
Robert Ingles, Engine: K20A2, Turbos: Precision SC6176 Tires: 24.5x8.5 M&H Slicks


2005 Acura RSX type s: 11.674 @ 117.420
Jason Shifflett, Engine: k20a4, Turbos: hks gt2835 Tires: toyo proxes tr1


2003 Acura RSX type s: 12.800 @ 110.000
Joe Rohinsky, Engine: K20A2, Supercharger: none Turbos: Greddy Tires: Azenis 215/55/16


2004 Acura RSX TYPE-S: 13.100 @ 100.000
LOUIS-MATHIEU LAMIRANDE, Engine: K20A2, Tires: M/T


2002 Acura RSX Type S Comptech Supercharger: 13.100 @ 115.110
JPSlick, Engine: K20A2, Supercharger: Comptech Tires: Kuhmo MX 245/45


2004 Acura RSX Type-s: 13.106 @ 100.890
Louis-Mathieu Lamirande, Engine: k20a2, Tires: MICKEY THOMPSONS


2006 Acura RSX TypeS Turbo: 13.224 @ 106.840
Johnny Simon, Engine: Stock, Supercharger: N/A Turbos: Mitsubishi T517z Tires: M&H Drag Slicks


2002 Acura RSX type-s: 13.310 @ 109.300
Andrew Becker, Engine: 2.0L, Supercharger: Jackson Racing Tires: PARADA spec-2


2002 Acura RSX Type-S GReddy Turbo: 13.355 @ 109.170
Claudio Francisco, Engine: K20A2, Turbos: GReddy kit Tires: Hoosier drag radials


2005 Acura RSX Type S: 13.572 @ 106.260
Jarryd Dang, Tires: Falken Azenis RT-615


2002 Acura RSX S: 13.583 @ 108.110
Claudio Francisco, Engine: K20A2 2.0L DOHC i-VTEC, Turbos: GReddy kit Tires: 225/45R-17 Toyo T1-S


2004 Acura RSX Type-s: 13.736 @ 101.290
Chris McQuay, Engine: 2.0L, Tires: Advan a032r's


2006 Acura RSX Type-S: 13.767 @ 102.430
Kyle Wolff, Engine: stock k20z1, Tires: hoosier drag radial


2002 Acura RSX S: 13.804 @ 101.260
Chris Prus, Engine: K20A@, Tires: BFG KDW2 245/45/17


2002 Acura RSX Type S: 13.833 @ 103.220
Reuben Adan, Engine: k20a2, Tires: 205/55/16 Falken Azeni Sports


2003 Acura RSX RSX-S: 13.840 @ 106.000
Speed Racer, Engine: K20A2, Tires: Falcon


2004 Acura RSX Type S: 13.849 @ 102.460
Ak, Engine: K20A2, Tires: Hankook Ventus HRII


2002 Acura RSX Type S: 13.852 @ 100.400
Jeramy Kindle, Engine: K20A2 2.0 Liter, Supercharger: n/a Turbos: n/a Tires: Falken Azenis 205/55/16


2002 Acura RSX Rsx-s: 13.905 @ 101.760
Chris P, Engine: k20a2,


2002 Acura RSX type-s: 13.976 @ 101.370
Max C., Engine: K20A2 with 176 000 miles (282 000km), Tires: falken fk 452


 


©2014 DragTimes - Disclaimer