New Build 400 Pontiac Engine from a 68 Pontiac Granprix.
Bored to 406.
New steel valves 2.11 1.77.
Ported 15 heads.
oil pan with a splash plate
Stock Rochester qudrajet is going to be renovated and
tuned in to fit the engine. Its not working quit right now.
New Build Th 350 shifkit and strengthened
Engine builder Janne Eneroth Örnsköldsvik
1967 Pontiac LeMans
2012 Shriners Car Show in Taylor, Michigan April 6, 2012
The JeffNetwork - http://www.jeffnetwork.com
CarWarz - http://www.youtube.com/user/carwarz/
CarWarzTheShow - http://www.youtube.com/user/carwarztheshow/
MudWarz60 - http://www.youtube.com/user/mudwarz60/
ParkWarz - http://www.youtube.com/user/parkwarz/
BikeWarz - http://www.youtube.com/user/bikewarz/
Fun on Hillstreet.MOV
Now with new refurbished and adapted Rochester Qudrajet.
But dont forget to take out sparetire and toolbox from the trunk before.
I forgot to take them out, so thats the nocie who sounds when the car skids
formula 400 LS1 Z06 5.0 Lightning
1971 Formula 400 TH400. Mods: #48 heads (unported), 068 cam, hooker
competition headers, HEI, jetted carb, changed ign curve and 3.42 gears.
55K miles and all was stock before mods. The red 79 WS6 TA has a stock LS1
with a modest program, dual exh w no cats, 3.23 posi, AOD and fresh paint.
Firebird vs Viper GTS
Camera riding shotgun in my 80 Firebird at the local dragstrip while racing
a modded 98 Viper GTS (gears, Exhaust,
cold air, chip). My Firebird is running a '72 Pontiac 455, stock 6x heads,
Pontiac 068 cam, stock intake, stock transmission, 3.08 gears, quadrajet
carb and weigh 3920 lbs with driver & 1/2 tank of gas. While he ran a
little quicker, I had a perfect .500 and he couldn't catch me.
406 cid Pontiac engine making 350+ HP and over 400 ft lbs of torque by Tin Indian Performance
This is Mickey Turrin's 406 Pontiac engine on the Dyno. It is pretty much a stock
rebuild using Seal Power pistons, RPM rods, a crower 60916 cam, re-done 6x
heads, Performer manifold and 750 Q jet carb. The engine makes over 13" of
vac at 850 rpm. Engine was rebuilt with Tin Indian Performance gaskets
and seals and is topped off with a set of TIP Billet-TEK aluminum valve
covers. The engine makes 351 horse and 430 ft lbs of torque. Built by Tin
Car Warriors - S02E02 - Pontiac Le Mans 1967
Car Warriors is a competition unlike any other. Every week, two of the
country's most talented and colorful local garages will have one crazy
challenge: Build an ENTIRE CAR from a piece of junk -- in just 48 hours.
It's the ultimate car building competition.
PONTIAC 1970 formula 400
1970 formula 400, complete engine rebuilding, YS block, #13 heads, forged
rods and pistons, RA3 cam (068), iron intake, home made 1968 Q-JET
converted to electric choke, RA4 headers, complete 2,5" Exhaust.
67 pontiac lemans sedan.mpg
Just in is this remarkably solid 1967 Pontiac lemans 2DR Sedan with a very
nice 3 year old paint job laid out over a very straight body and solid
undercarriage. This car is powered bye which appears to be its original
250 HP 326 with a new edelbrock 4bb carburetor and intake. It has new dual
Exhaust, 350 turbo transmission, power steering, power brakes,
and new tires with pacer chrome rims. This is a beautiful car that runs
and drives just as nice as it looks. It goes down the road straight with a
great sounding engine, smooth shifting transmission, and a good ride and
stance. The Floors, frame, and trunk floor are also very solid and nice.
The black vinyl top is in great condition, the main down fall in this car
is that the front bucket seats, headliner, and arm rest need to be replaced
on the interior. After you do a little interior work this car will be
ready to cruise to you next classic car show or just simply drive and