Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

330Ci Eisenmann exhaust clip

My E46 330Ci Sport. Not the best clip, but not bad for a normal camera I suppose.


 


More Videos...


Supersprint Exhaust Interior of BMW 330i
Some clips for anyone who want to hear what a Supersprint Exhaust sounds like in normal driving situations with some play mixed in too! To be honest there is a minor bit of drone at low RPMs under load. Once a downshift is done to put RPMs around 3,000 under load (uphill) then the slight drone disappears.





2001 BMW e46 325 to M3 conversion
2001 BMW 325ci with m3 body





Straight Pipes 330Ci
Schmiedmann Fächer, Eisenmann Soundrohre und Eisenmann SS ESD





Cool Secret Tips And Tricks About Your E46
A few tips and tricks that you may perform on your e46.





BMW E46 330CI Schmiedmann Competition
This shows the BMW E46 330CI Schmiedmann Competition with ESS compressor in action!! See more about the build here http://www.schmiedmann.dk/static/Html/Danish/styling/10-03-10-BMW-E46-330CI -carbon-ESS-kompressor/index.htm All parts mounted on the BMW can be found here http://www.schmiedmann.com





BMW E46 2004 330ci Car PC Demo
This is a demo video of the car PC installation on my 2004 E46 330ci.





E46 Muffler Delete Interior Windows Up.
For you guys were wondering what the car sounds like inside... Here it is, Its a little louder than the video shows, but not by much, you can always hold a conversation with anyone without raising your voice. Sorry I talk to myself a lot when I'm driving. When I passed the cop, I was still going 65 and the speed limit was only 45. He was slowing down when I passed him and I swore he was gonna make a U turn, but he pulled into the subdivision. Illinois State Police!!!





330ci headers exhaust and burnout
custom quad Exhaust headers and muffler delete.sounds the same without quads tho.





BMW Quad Exhaust +Many Upgrades
2003 bmw 330i with custom quad Exhaust originally planned on running the m3 muffler, but my body shop guy couldn't do it so now it is just straight pipes as you can see also since this is a "part two" the mods in this video are as follows: custom painted vented hood m3 style mirrors painted the front lip csl custom cf trunk lid led tail lights acs roof spoiler custom quad Exhaust replica m3 rear bumper painted engine bay soon to be changed suede interior and all of interior soon to be changed part thee coming in summer!





Большой тест-драйв (видеоверсия): BMW 3 серии
Все наши тесты: btdrive.ru В «Большом тест-драйве» автомобиль, который Сергей Стиллавин хотел бы иметь в своём владении, Рустам Вахидов признает его высокое качество, но отмечает небольшие проблемы с управляемостью, а Виктория Колосова заявила, что он (автомобиль) «ну... красивый».





BMW 3 E46 - Большой тест-драйв (б/у) / Big Test Drive - БМВ 3 Е46
Сайт: http://btdrive.ru/ | Twitter: http://twitter.com/bigtestdrive | G+: https://plus.google.com/107490113575465327649 | Instagram: http://instagram.com/bigtestdrive | Facebook: http://facebook.com/stillavinpro | Vkontakte: http://vk.com/stillavinpro По признанию Сергея Стиллавина если бы не его габариты, то он давно бы польстился на автомобиль, ставший героем сегодняшнего выпуска б/у-версии "Большого тест-драйва". При каких обстоятельствах и за какую сумму приобрел BMW 3 E46 его нынешний хозяин Дмитрий, что ему пришлось сделать с автомобилем, получилось ли у Сергея Стиллавина комфортно разместиться за рулём машины и что удивило Рустама Вахидова.





E46 330 Cabrio Eisenmann Soundrohre
Vsd + Msd Eisenmann Soundrohre





Part 1: Installing shocks, struts and springs on a BMW 3 series 99 thru 05 (E46)
BLOG ARTICLE: http://blog.bavauto.com/14307 "Like" us on Facebook - http://www.facebook.com/BavarianAutosport "Follow" us on Twitter - http://www.twitter.com/BavAuto "Subscribe" to us on YouTube - http://www.youtube.com/BavarianAuto Visit our online store - http://www.bavauto.com/ All of the items shown in these videos are available in our online store at http://www.bavauto.com/. Need additional tech help? Please visit our tech blog for thousands of Tech and DIY BMW and MINI articles at: http://blog.bavauto.com/ --- In Part-1 of this two part series, we will replace the front shock/strut/spring assembly. See Part-2 for the rear shock and spring replacement. The Bentley repair manuals will cover standard shock and spring replacement for the various BMW and MINI models. This DIY will assume that the DIYer has the applicable Bentley manual for additional reference as well as fastener torque values. Note that we will be installing the Bilstein PSS-10 coil-over kit. However, the procedures would be the same for any common shock/strut replacement (including installing sport springs, if desired). PARTS USED: • New shocks/struts (Bilstein, Koni, Sachs, etc.) • New sport or stock replacement springs, if desired (BMW, BavAuto, Eibach, etc.) • New Shock install kits (compression bumpers, dust shields, spring pads, etc.) • New upper strut and shock mounts • New strut & shock mount gaskets (as required) • Rear shock mount reinforcing plates TOOLS USED: • Bentley Repair Manual • BavAuto Non-Marring pry bar set * BavAuto spring compressor tool • 13mm through 18mm ½"drive socket & ratchet set with various extensions • 4mm through 8mm Allen keys or bits (for ratchet use) • 13mm through 18mm combination wrench set • Assorted flat and Phillips screwdrivers PROCEDURE: FRONT (applies directly to the E46 3-series, but others are similar): 1) Safely raise the front of car, with suspension hanging. 2) Remove the wheels. 3) Disconnect the upper end of the swaybar link from the shock/strut bracket. Note that the through-stud for the link's upper joint (as well as the lower) must be secured using a 16mm to 18mm thin open end wrench. This particular link is 16mm. 4) Remove the strut mounting pinch-bolt. The bolt goes through the strut mounting clamp on the wheel hub/spindle assembly and has a nut on the opposite side (some models do not use nuts, the bolt threads into the clamp). 5) Set the mounting bracket for the ABS sensor wire, brake pad wear sensor wire (left side only) and brake fluid hose aside. Note that other models may have these hoses mounted in a bracket that is affixed to the shock/strut housing. In these cases, remove the wires and hose from the bracket. 6) If the vehicle has adaptive headlights (self-aiming), disconnect the sensor link from the control arm or the sensor bell-crank arm. The sensors may only be present on one side of the vehicle. 7) Place a support or jack under the lower control arm to support the suspension as the upper strut mount nuts are removed. 8) Remove the three 13mm nuts that secure the upper mount to the body (strut tower), under the hood. 9) Gently lower the jack or support, from step-6, and lower the strut assembly. Pull the strut assembly up and out of the hub/spindle. A helper may need to push down on the hub/spindle as you pull the strut upward. If the clamp is too tight for the strut to pull out, use a cold-chisel or large flat-blade screwdriver as a wedge to open the clamp a bit. Tap the wedge into the split in the clamp, widening the clamp, allowing the strut to be removed. 10) Once removed from the hub/spindle clamp, remove the strut assembly from the wheel well area. 11) Install a spring compressor to the spring on the strut assembly. Compress the spring until you can tell that the spring pressure is relieved from the upper and lower spring seats. 10) Remove the upper shock/strut nut that is at the top of the assembly, in the center of the upper mount. To remove the nut, you can use the method shown in the Spring 2007 issue of our Fast Times newsletter, page-7, or you can use an impact gun. DO NOT use an impact gun for re-assembly! 11) Once the nut is removed, disassemble the upper mount, upper spring perch and washers from the shock's piston rod. Keep track of the various washers and their locations. 12) Pull the spring (and compressor) off of the shock/strut. 13) Assemble the new shock/strut and/or spring. 14) We're sorry, but the description can not be any longer (youtube requirement). Watch the video and see our tech blog for the full DIY steps at http://blog.bavauto.com/ -------- All products noted in this video can be purchased in our online store, http://www.bavauto.com/, 24 hours a day, 7 days a week. e-mail us at info@bavauto.com or call our headquarters and speak to our knowledgeable advisors at (800) 535-2002 (Mon.-Thurs. 8AM to 9PM EST, Fri. 8AM to 7PM EST, and Sat. 9AM to 4PM EST).





■BMW 3 Series Production BMW Munich Plant Full HD 1080i
BMW 3 Series Production BMW 3 Series Production BMW Munich Plant Full HD 1080i plant series http://www.youtube.com/watch?v=f_VtNqpgUXE http://www.youtube.com/watch?v=vSJaQHRn5c4 http://www.youtube.com/watch?v=qhCXFsQ6kKQ





Part 2: Installing shocks, struts and springs on a BMW 3 series 99 thru 05 (E46)
BLOG ARTICLE: http://blog.bavauto.com/14307 "Like" us on Facebook - http://www.facebook.com/BavarianAutosport "Follow" us on Twitter - http://www.twitter.com/BavAuto "Subscribe" to us on YouTube - http://www.youtube.com/BavarianAuto Visit our online store - http://www.bavauto.com/ All of the items shown in these videos are available in our online store at http://www.bavauto.com/. Need additional tech help? Please visit our tech blog for thousands of Tech and DIY BMW and MINI articles at: http://blog.bavauto.com/ --- In Part-2 of this two part series, we will replace the rear shock and spring. See Part- for the front shock/spring/strut replacement. The Bentley repair manuals will cover standard shock and spring replacement for the various BMW and MINI models. This DIY will assume that the DIYer has the applicable Bentley manual for additional reference as well as fastener torque values. Note that we will be installing the Bilstein PSS-10 coil-over kit. However, the procedures would be the same for any common shock/strut replacement (including installing sport springs, if desired). PARTS USED: • New shocks/struts (Bilstein, Koni, Sachs, etc.) • New sport or stock replacement springs, if desired (BMW, BavAuto, Eibach, etc.) • New Shock install kits (compression bumpers, dust shields, spring pads, etc.) • New upper strut and shock mounts • New strut & shock mount gaskets (as required) • Rear shock mount reinforcing plates TOOLS USED: • Bentley Repair Manual • BavAuto Non-Marring pry bar set • 13mm through 18mm ½"drive socket & ratchet set with various extensions • 4mm through 8mm Allen keys or bits (for ratchet use) • 13mm through 18mm combination wrench set • Assorted flat and Phillips screwdrivers PROCEDURE: REAR (applies directly to the E46 3-series, but the E36 3-series uses the same steps and procedures): 1) Safely raise the rear of car, with suspension hanging. 2) Remove the wheels. 3) Place a jack under the lower shock mount eye or the wheel hub assembly. Slightly raise the suspension (just enough to remove the downward tension on the shock). 4) Remove the lower shock mount bolt. 5) Lower the jack and allow the suspension to hang free. 6) Remove the trunk side trim panel to access the upper shock mount. 7) Remove the two 13mm nuts from the upper shock mount, at the top of the shock tower. 8) Lower the shock out of the vehicle. 9) Assemble the new shock with new compression bumper, dust tube and upper mount. Be sure to re-use the large lower and upper washers for the upper mount. These washers must cup away from the mount. lower washer cups downward and upper washer cups upward. 10) If the spring is being replaced, it can be removed BEFORE re-installing the shock. Have a helper pull downward on the wheel hub assembly and pull the spring out from between the chassis and the upper control arm. 11) Using new upper and lower spring pads, install the new spring in the same manner as the original was removed. Install the new spring pads, then install the spring. 12) Install the new shock. Place a new shock mount gasket on the shock mount and insert the assembly up into the shock tower. If installing a shock mount reinforcement plate, place the plate over the two shock mount studs, on top of the shock tower, before installing the two nuts. Install the two nuts. Install the trunk trim panel. 13) Install the lower shock mount bolt. Be sure to install the washer on the bolt before installing the bolt. Use the jack to raise the suspension assembly to align the lower shock mount with the hub mounting point, so the bolt can be inserted and threaded. Tighten the bolt. 14) Repeat for the other side. -------- All products noted in this video can be purchased in our online store, http://www.bavauto.com/, 24 hours a day, 7 days a week. You are also welcome to e-mail us at info@bavauto.com or call into our headquarters and speak to our knowledgeable advisors at (800) 535-2002 (Mon.-Thurs. 8AM to 9PM EST, Fri. 8AM to 7PM EST, and Sat. 9AM to 4PM EST).




Which car is faster? Which Car is Faster?





Similar 1/4 mile timeslips to browse:

2001 BMW 330Ci AA: 12.776 @ 105.830
Ryo, Engine: M54B30, Supercharger: Rotrex C38-81 Turbos: N/A Tires: Cooper RS3


2001 BMW 330Ci : 12.858 @ 103.950
PEI330Ci, Engine: 3.0L Inline 6, Tires: 26


2001 BMW 330Ci AA: 13.073 @ 104.450
Ryo, Engine: M54B30, Supercharger: Rotrex C38-81 Turbos: Stock Tires: Cooper RS3


2001 BMW 330Ci ZSP: 13.689 @ 99.960
Julio, Engine: m54b30, Tires: 255/40r17 sumitomo htrz


2005 BMW 330Ci ZHP: 13.974 @ 100.330
John, Engine: ecis intake,


2001 BMW 330Ci Headers and Exhaust: 14.300 @ 99.210
SWINFORD, Engine: M54B30, Tires: General Exclaim 255/35 Rear 235/40 Front


2004 BMW 330Ci coupe: 14.976 @ 93.810
Eric Chang, Tires: Yokohama AVS sport


2003 BMW 330Ci : 15.263 @ 92.060
Scott, Engine: Stock, Tires: 205 50 vr 17 Goodyear RSA


2002 BMW 330Ci : 15.322 @ 91.440
Joanne, Engine: Stock, Tires: Continental


2005 BMW 330Ci Convertible with Performance package: 15.430 @ 97.000
Kevin,


2003 BMW 330Ci : 15.520 @ 92.850
Rob, Tires: 225/45 R 17


 


©2014 DragTimes - Disclaimer