SB Chevy 302 8000 RPM Dyno Pull

8000+ 302 Chevy on the Dyno. Built By CNC-Motorsports Competition Engines, Brookings, South Dakota. Call us toll free 800-341-1528 or 605-692-1697 to build your next engine. www.cnc-motorsports.com check us out on-line

More Videos...


8500 RPM 302 SBC from Nelson Racing Engines.
Heres a old 302 we did a long time ago it has cool sound at 8500 rpm. More videos at http://nelsonraciingengines.com. Also go to http://veritasmoviestudio.com.





CHEVROLET DZ302 V8 (A REAL ONE!)
http://www.kennedyperformance.com. THIS IS AN ORIGINAL DZ 302 OUT OF A 1969 Camaro Z-28 REBUILT BY KENNEDY PERFORMANCE. IT PRODUCES 345FTLBS TORQUE AND 415 HP MEASURED ON A SUPERFLOW Dyno AND STP CORRECTION FACTOR. Dyno TESTED TO 7000RPM.





12000 rpm nova at it again!
289 cuin sbc 10.5 lbs per cuin nova vs 4.5 lb big block Camaro. Modified racing at eddyville Ia





1964 327 Dyno Test
327 Chevy small block Dyno test. Bored and stroked to a 383 and built for my 64 Impala that is being restored. Matching casting numbers, original looks, high torque and good manners were important. Using the Dyno shop headers, it managed to get 420 torque and 378 horsepower using stock 327 block, heads, intake. With the stock 2.5 inch cast iron Exhaust manifolds and 2.5 inch head pipes, 424 torque and 362 horsepower. Very little loss was attributed to the low flow rate of the stock intake manifold. With the stock 2.5 inch cast iron Exhaust manifolds, 2.5 inch head pipes and a 2 inch reducer at the end (the stock Exhaust necks down from 2.5 to 2 inches) 404 torque and 351 horsepower. With the stock 2.5 inch cast iron Exhaust manifolds, 2.5 inch head pipes and a 2 inch reducer at the end and the stock air cleaner/filter 410 torque and 362 horsepower.




Follow