TX2K12 - 8 Second 2JZ S2000 Giant Wheelie!
TX2K12 DVD Released! http://www.1320video.com/store/dvd/ Raw Performance's
2ZJ powered Honda S2000 decided it would try and launch off the drag strip
Sunday at TX2K12 during an elimination pass against the Majestic
The World's Fastest DeLorean - /TUNED
What happens when you throw a very large and power Grand National motor
into a 30 year old legend like the DeLorean? Thats what Matt Farah finds
out on this week's episode of TUNED
1997 Supercharged Honda Prelude SH Fix Boost Leak, Dyno, and Runs
I replaced all the belts and intake gaskets in my 1997 Prelude SH. Before i
did this to my car it felt like a stock prelude. The car has a sleeved
block, forged internals, Eaton Super Charger, stage 2 clutch, full Tsudo Exhaust, D2 Coil Over suspension, Full SH
Package. My father and I did all mechanic work. I got the car tuned at RLZ
Engineering in North Carolina. I decided to test it out with some buddies
back home in South Carolina.
Music used in the video:
Blue Foundation - Eyes on fire (Zeds Dead Remix)
Gotye - Somebody That I Used To Know ft. Kimbra (KDrew Dubstep Remix)
10 Things You Didn't Know About The Honda S2000
A list of 10 things you didn't know about the Honda S2000. VTEC kicked in,
Subscribe to Car Throttle: http://bit.ly/Zl0sWj
Music: "As I Figure" by Kevin MacLeod (http://incompetech.com)
----- Follow Car Throttle -----
Subscribe to Car Throttle: http://bit.ly/Zl0sWj
On our website: http://www.carthrottle.com
On Facebook: http://www.facebook.com/carthrottle
On Twitter: http://www.twitter.com/carthrottle
Forced Induction - Supercharger vs. Turbo Charger
This video was made to describe in moderate detail the differences between
Superchargers and turbo Chargers, as well as describing the
components, advantages, and disadvantages to each. Complementing the
speaking track is a slideshow of related pictures and videos. I hope this
video helps some of you curious up and coming mechanics to better
understand methods of forced induction. Please comment maturely, and
600hp Turbo Honda S2000 vs 700hp Camaro D1SC (HD)
running up against a jotech tuned single turbo honda s2000 they get 2 runs in, both times
there is a clear winner. Watch to see which car comes out on top. If you
look closely you'll see that the Honda's downpipe goes right out the side
of the front passenger fender!
The Honda is running @ 25lbs of Boost on a 6262 Precision turbo on a stock motor with just springs and
I think the Camaro
shredded a belt and busted a pulley on its last race of the night and so we
may get a rematch later down the road. Stay tuned!
Share this video with your friends, more videos coming!
Post up if you have any questions or comments.
Like this video and subscribe for more videos!
Check out http://www.TexasSupras.com for more videos,
If you've got a google+ page follow this channel here:
2 Low for Comfort [Slammed/Fitted S2000 content]
My roommates been trying to get something up of his S2k so while in Cali i
decided to get some vid and get something together! Be looking for more of
this car and many more to come like and share!
Follow me on Intagr.am = jbaxproductions
If you guys haven't noticed I'm going to keep this channel really active so
don't forget to subscribe and not to mention thanks for viewing!
Song: Zed's Dead - Oh No
My jdm honda prelude type S- updated!
Mods: skunk2 pro stage2 cams, retainers and pulleys
tein superstreet coilovers front and rear
dc sports manifold, jap speed decat pipe, skunk2 Exhaust system
auto-manual tensioner conversion, AEM v2 air intake,70mm
matching ported intake manifold. Apexi afc neo- mapped on Dyno-245bhp
Ap2 s2000 clocks fitted, DC5 integra steering wheel, Razo
Tenzo R gear knob, billet aluminium locking nuts, Budyclub P1
Pager alarm system with remote start, reverse camera, Pioneer
avic 900 dvd.
HKS speed defender, and HKS fuel cut defender.
DMS S2000 Pro76R series - Header, Decat and exhaust system - For Supercharged and Turbo Charged
Introducing the world first true 3 inches 76mm Pro70R Exhaust series developed and tested by DMS. Kit
included 3 inch Header, Decat and Exhaust system.
We found another 35BHP at wheels and 25Ft/Lb torque of Gain and 0.1bar more
Boost just by swapping the old 2.5
inch header and Exhaust system to our
DMS Pro76R Exhaust system. This gives
maximize free flowing for all Super and turbo Charge application. Is a must for All Force
With free flowing Exhaust, fuel
economy, Boost, power, engine load
and performance will be all increase, this will allow you to maximize the
benefit of your investment.
Drive by DB - 98DB
1 meter Static - 104DB
We can also design this Exhaust to
your spec, any noise, any back box shape and any material.
For more info and prices please email us @ firstname.lastname@example.org or visit
us at www.dmsracingltd.co.uk
65MM Pro65R is now also available, we found 10bhp more than OEM setup. Info
and video is - http://www.youtube.com/watch?v=4RpcMiRM_xc&sns=em