Pro Toured 1984 Monte Carlo SS
My Dad and I built this car and have had it since it was brand new in '84.
Learned how to drive in this car! 1984 Monte Carlo SS. 350 HO GM
Performance crate engine, comp cam, Edlelbrock RPM intake manifold, 2.5" Exhaust, headers, B&M torque converter,
lowered, 17x8 torque thrust wheels, Baer brake track kit, Yukon 3.73 gears
and chromoly axle shafts, LSD diff, HD cross member and cut outs for true
dual Exhaust, too much to list. Sorry
for the terrible sound quality when it cranks up. Cheap camera! Here is a
link to a good video of the Exhaust
2005 Chevrolet Monte Carlo SS Supercharged Start Up, Exhaust, and In Depth Tour
In this video I give a full in depth tour of the 2005 Chevrolet Monte Carlo
SS Supercharged. I take viewers on a close look through the interior and
exterior of this car while showing details, over viewing of features, and
noting unique styling cues to the vehicle itself. I also show the engine
and the details of it, start it up and see how it sounds under
acceleration. A thorough tour/review of this car designed to give others a
greater overall appreciation of the vehicle.
1986 Monte Carlo SS built by JTBCarDesign
1986 Monte Carlo SS on staggered 24x10 in the Rears and 22x8 in the front.
Built by JTBCarDesign. It has a Small Block 406 with 530hp. 12 bolt Posi
with 3.73. 700R transmission.
1986 Chevrolet Monte Carlo SS All Street Project Car
This is my 1986 Chevrolet Monte Carlo SS. I have owned this car for 13
years and it has been in the family for over 26 years. The car has just
under 29,000 original miles. The engine and drivetrain is all original as
well as the paint and interior. I didn't drive the car much, so I decided
to make a few subtle changes, mostly in the stance, so I would drive it
more. Just don't care for the stock stance on these cars. For the front I
used 2" drop Belltech spindles and 1" drop Belltech springs. For the rear I
used OPG 3" drop rear springs. 3" total drop front and rear. I used
Belltech Street Performance shocks on all four corners. The wheels are
Center Line Retros 18 x7 front, 18 x 8 rear. Nitto NT555 tires 225/45 in
the front, 255/45 in the rear. Also for a little more sound, I went with
Flowmaster Super 40 mufflers and custom tailpipes. I drive the car a lot
now just cause I enjoy it so much more. I didn't cut anything and I have
everything to put the car back original if I ever decide to in the future.
Thanks for looking!
1978 monte carlo
is for sale for 2,500 if anything needs to be known plz email me ay
Sexy wife in a 1978 Chevrlolet Monte Carlo
The Wife and The Monte.
Shot with a digital foto camera but it looks like its shot with an 8mm
camera from the '70 LOL
Bought some small stuff from eBay for the car since last post.
Enjoying the car very much.
1978 Chevrolet Monte Carlo
Just driving around in my home town.
Clips starts at night daytime footage starts at 2:27.
Hope you enjoy the clip as I enjoy the car :)
This my first V8 powered car.
It has a 305 CID/cui and was build in Wentzville or Oshawa CAN (i got
different results on a couple of VIN decode sites as far as saying that my
car is a Corvette LOL)
It needs some work but it drives ok.
1978 Monte Carlo
383 Stroker 1978 Monte Carlo with open headers
Swapped out my 355 for this 383 Stroker.
Eagle Steel Crank
Eagle SIR Rods
Speedpro Hyper Coated Pistons
Comp cam Hyd Roller # XR264HR
World S/R Torquer Heads, Street Ported and Polished
Stainless Valves 2.02 1.6
Edelbrock RPM Intake
Quickfuel 650 Carb with Electric Choke.
Fast and Furious 3: Monte Carlo
Inside Line takes the Fast and Furious 3 movie cars to the test track.
Subscribe for the latest Edmunds.com videos:
Watch More Videos on Edmunds.com:
Edmunds Mobile: http://www.edmunds.com/mobile/