How to make a body panel from scratch. Step by step using Clay Sculpting - The Real Fast & Furious
Here is the making of the last panel on the JZ COBRA concept car reshell. A
step by step process to help you learn how to do it yourself. As always
clay is used to get the shape from which a panel is made up and finished.
If you want to see how the rest of the JZ COBRA concept car was made with
clay then please see other videos. Feel free to ask questions. I am always
interested in doing exotic car concepts using real Ferrari, Lamborghini or
Maserati etc sports cars as donor cars. I am able to take any one of these
cars and turn them into a concept car of your dreams. Be the first to do
this outside of any factory. If you are wealthy then why not be the first
person in the world to turn your exotic supercar into a concept car of your
dreams. The fast and the furious movies inspired people to change the look
of there cars. Now I am showing you how to design your own car by your own
hand and become a real fast and a real furious car designer in real life.
This IS the next level!!
Why You Need Hood Pins - Presented by Andy's Auto Sport
Add extra security to your light weight, aftermarket hood by installing
hood pins. It's never a good day when your hood flies up on you! From stock
replacement parts to high-performance aftermarket accessories, Andy's Auto
Sport has what you need to get the looks and power your vehicle deserves.
Contact Us 1(800) 419 1152 or by email firstname.lastname@example.org
Please feel free to rank our video, share it, or embed it!
How to make simple carbon fiber panels
This video shows the basics of carbon fiber lay up, step by step for vacuum
bagging. Take a look, leave feedback and ask any questions you may have.
Resources to buy your own carbon products can be found in the buyers
resource section of TheFabForums.com
DIY: Wrapping Rims in Matte Black Vinyl
I wanted to try a new style for my winter rims, and instead of pinting them
i wrapped them in vinyl, Costs about $10 a rim.
http://www.ebay.ca/itm/321097538225 This short video shows you how to wrap
a rim quickly(sped up 3x), There really is no downfall to doing this, faster and cheaper then painting, the
vinyl only weighs .4 ounces or about 50 grams. and thats spread out
throughout the rim and if you dont like it then just peal it off. If you
want more info or you want to buy some vinyl contact me at
email@example.com Or come contact me at 8thcivic.com please don't send a
message though youtube, I don't come here often.
Check it out on ebay for the full written DIY.
Or visit my ebay page at
and scroll down to Matte Black Vinyl Rim Wrap 6x 24"x24"
Also the first song uses is a
-rusko remix its rusko hold on sub focus remix, the second song is
-supersonic the world of discotronic and the last song is the classic
-chemical brothers hay boy hay girl with a dunstep remix.
How-To Install a Nitrous Oxide Kit
Chris Duke from Motorz TV http://www.motorz.tv shows you how to a Nitrous oxide kit from Nitrous Express on a 2008 Ford Mustang GT (S197).
Show notes: http://www.motorz.tv/Nitrous-oxide/
Mustang Scott Drake Hood Pin Kit Installation 2005-2009
This Scott Drake Stainless Steel Hood Pin Kit is for all 2005-2009 Mustangs, and keeps the hood closed
in the case of a hood latch failure. It also adds a certain aesthetic to
the front end of your car, providing that classic muscle car look. The kit
comes complete with the pins, plates, and cables.
For installation, you want to first remove the radiator support cover, adn
then install the support brackets for the pins. Next, install both pins and
use a sharpie to mark the hood. Drill the two holes in the hood of your Mustang, making sure to hold
the drill at the same angle of the pins, and then install the plates.
Then, attach the lanyards to the radiator support and cut the radiator
support cover to fit the new hood pins, using the provided Scott Drake
template. Reinstall the radiator support cover and your installation is
See more 2005-2009 Mustang
Hood Components from CJ Pony Parts:
See more Scott Drake Mustang Parts from CJ Pony Parts:
Myths About Plasti Dip (Vol 1)
Fonzie goes through the frequently asked questions about Plasti Dip.
Notice: All cars, paints, and surfaces are unique. Please refer to Terms
and Conditions page on www.dipyourcar.com for more info and guidelines.
Does it really peel off? Can you spray clear coat over plasti dip? Can
you spray Plasti Dip over primer? Can you wash plasti dip? Can you plasti
dip Exhaust tips? Peel Coat
Quik-Latch on Performance TV
Quik-Latch on 'Performance TV'
On this episode, the traditional style of hoodpins on a 78 Malibu (which
had long since rusted out) were ditched in favor of Quik-Latch's QL-50-LP
hood pin sets. Also briefly featured is the remainder of the Quik-Latch
Custom Scion xA Show Car - Lambo Doors - Lowered - Custom Interior
Be sure to check us out on Facebook at:
My friend Ralph, aka Wheelman, contacted me about showing his awesome 2004
Scion XA show car. He has a tremendous amount of time and money invested in
this car. It has a full custom interior with Sparco seats, an In-dash T.V.,
a Custom stereo with Alpine speakers and a Polk Audio Sub, Lamborghini
style doors, a carbon fiber hood with hood pins, a cold-air intakes, a
Hotchkis strut tower brace, and much, much more. I hope you find it
interesting, thanks for taking a look!
Check out Wheelman's channel at:
2004 Scion XA custom show car Lamborghini doors lowered custom twin cam
Hotchkis Polk Audio Alpine amp stereo Sparco seats import tuner hot rod rat
rod lead sled custom muscle car vintage classic collector vehicle auto
automobile high performance carbon fiber hood RamblinAround rambling vlog
How To Make a Hood Scoop - Custom Metal Fabrication with Ron Covell at Eastwood
BUY an English Wheel:
Buy a Shrinker-Stretcher:
BUY Metalworking DVDs:
Buy Panel Bag / Mallet:
BUY Hammers / Dollies:
In this video, one of the best metal workers in the world - Ron Covell -
shows the basics of metalworking while forming a hood scoop in less than an
hour while using many Eastwood Products including a small bench-mounted
English Wheel, Shrinker-Stretcher, panel beater bag and hammers and
dollies. Plus he did this all LIVE at the Eastwood Both at SEMA 2013!
Eastwood has everything you need to do the job right, from metal forming
tools to welders, plasma cutters, powder coating supplies, paint and hand
Under Hood Insulation And Cover Installation
This video demonstrates how to install our new product.
QuietRide Solutions is introducing something new for your hood. Our new
Hood Covers are perfectly cut to fit your vehicle. These Hood Covers come
with 3D molded and raised graphics to further customize your hood.
Currently, we are offering this for any Ford, GM or MOPAR vehicle. Visit
www.quietride.com and order yours today.