Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

10 Min Automatic Transmission Fluid Flush + Replacement (Most Cars)

http://www.CarReality.com Ever wanted to do a complete Automatic Transmission Service with a Fluid Flush and Fluid Change! Well now you can do it in 10 Minutes! This DIY is super easy really fast and ridiculously cheap. The reason we didn't change the filter is because the filter on this transmission is internal and you would have to take apart the transmission to get to it. There is a a filter for the shift solenoid that can be cleaned to improve shifting. There is a small black round filter for the transmission, its under the air box near the solenoid that could be changed if you want to be more thorough. Catch us in our other 10 Minute Challenge videos!


 


More Videos...


Changing Automatic Transmission Fluid
Transmission fluid should be changed periodically as per your vehicle manual to ensure the transmission runs efficiently and avoid costly transmission repairs. Visit your nearest Supercheap Auto store or visit us online - www.supercheapauto.com.au or www.supercheapauto.co.nz





How To Flush a Transmission Cooler -EricTheCarGuy
If you're installing a new or rebuilt transmission into your vehicle, it's a good idea to flush the transmission cooler. When your old transmission failed, it probably sent a bunch of gunk right into your transmission cooler. Before you run your new transmission it's a very good idea to get all of that gunk out of there. It's a simple procedure that can save that shiny new transmission you just installed. In addition to that, if you have a Honda like I do, it's an even better idea to install a new in line filter into the system. This will ensure that your new transmission lasts a good long time. In this video we flush the transmission cooler and install a new filter into my 2001 Honda Odyssey. After all I've been through with this van lately, it's great piece of mind. Here's some useful links for you. Inside my Odyssey Transmission: http://www.youtube.com/watch?v=dC-Ssyg7fg4 How to Change Honda Transmission Fluid: http://www.youtube.com/watch?v=L7_RsnD8hAU Article on Transmission problems: http://www.ericthecarguy.com/faq/solving-transmission-problems Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/47201- how-to-flush-a-transmission-cooler#73200 Visit me at: http://www.ericthecarguy.com Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





How To Replace Brake Fluid - EricTheCarGuy
As I said in the video I've been asked about this video for some time and I was happy to get the opportunity to make it. Now that I think about it however I did not address ABS systems in this video however the Subaru used does have ABS. For the most part, you can replace the brake fluid and not have to worry about the ABS, however in some cases you might need to bleed the system with a scan tool in order to get the brakes to work properly. Be sure to check the service manual of the vehicle you're working on before committing to bleeding at the wheels. If you're just removing the fluid in the master cylinder, you should not have to worry about the ABS at all. If you're having brake problems, check out this article I wrote on handling brake problems: http://www.ericthecarguy.com/faq/solving-brake-problems The best place for answers to your automotive questions: http://www.ericthecarguy.com Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





Changing Automatic Transmission Fluid and Filter, 1997 Subaru Legacy (Part 2) - EricTheCarGuy
Changing Automatic Transmission Fluid and Filter, 1997 Subaru Legacy (Part 2) - EricTheCarGuy Visit me at: http://www.ericthecarguy.com/ Part 1 http://www.youtube.com/watch?v=AVhXQti8Qv4 Well this is Part 2 of this series and I think has a few tips that make it worth watching, especially the one about how I install the transmission fasteners that's been a favorite 'trick' of mine for years and I learned it from a fellow coworker a few years ago. I'd also like to point out that this is a continuation of the Subaru performance series, here's a link to the first video in that series. http://www.youtube.com/watch?v=rsGTeWayqIU When all is said and done I'm going to make a video showing the conclusion of this odyssey and hopefully we'll have a 'fix'. Till then --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





Complete Transmission Fluid and Filter Change
Filtran, LLC is the world's leader in automatic transmission filtration solutions. Extend the life of your transmission by changing your transmission filter every 3 years! Don't forget to request a premium Filtran filter, it's the automatic choice!





Part 1: Changing Automatic Transmission Fluid & Filter On A BMW/MINI
blog.BavAuto.com -- Most people think that because BMW and MINI call their transmission fluids "Lifetime" or "Extended Service" it doesn't have to be changed. Not true. To get the most out of your transmission and avoid a costly, catastrophic failure, you should change the fluid and filter every 50,000 miles. Watch Bavarian Otto demonstrate how to do this on a BMW E39 (5 series 97 thru 03). You'll find the specific fluid and filter your BMW/MINI needs in our online store at www.BavAuto.com.





Dumb Things NOT To Do To Your Car
Scotty Kilmer, mechanic for the last 46 years, shows some of the dumb things he's seen people do to their cars. And, If you like my car help, be sure to watch my live car talk show every Saturday morning at 10 AM CST on YouTube. I answer your car questions LIVE there. Just check it out at https://www.youtube.com/watch?v=VognjkYaMjg&list=UUuxpxCCevIlF-k-K5YU8XPA&f eature=c4-overview . And remember, every TUESDAY I upload a new video, so don't miss them.





Fixing A Transmission That Slips And Clunks
Scotty Kilmer, mechanic for the last 46 years, shows how you can fix your own automatic transmission. If it's slipping or clunking, check out this video. And, If you like my car help, be sure to watch my live car talk show every Saturday morning at 10 AM CST on YouTube. I answer your car questions LIVE there. Just check it out at https://www.youtube.com/watch?v=VognjkYaMjg&list=UUuxpxCCevIlF-k-K5YU8XPA&f eature=c4-overview . And remember, every TUESDAY I upload a new video, so don't miss them.





Changing the Transmission Fluid and Filter on a Full Size Rear Wheel Drive GM
Changing the Transmission Fluid and Filter on a Full Size Rear Wheel Drive GM http://www.ericthecarguy.com/ I've had some requests for some maintenance work so here you go. I actually like working on this big old beast owned by my friend Bret Schneider who runs the business WOW window boxes, check out his website he does great work and I love promoting my friends businesses. http://www.wowwindowboxes.com/index2.php#/home/ --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- As always stay dirty Eric Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





How To Change Honda Automatic Transmission Fluid - EricTheCarGuy
How To Change Honda Automatic Transmission Fluid - EricTheCarGuy http://www.ericthecarguy.com/ It seems simple enough but sometimes the simple things can be made difficult. Honda automatic transmission fluid changes are not like most transmission fluid changes in a few ways, those ways are outlined in this video. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





How to Change Tie Rods (inner and outer tie rod ends)
How to replace inner and outer tie rods, How to replace tie rod ends, How to replace tie rods. How to check to see if your tie rod is bad: https://www.youtube.com/watch?v=brI2feYiEi8 Tie Rod End Cutaway: https://www.youtube.com/watch?v=3RjhtVse6jE This video will show you in depth how to change the inner and outer tie rods of your car or truck. You need a special tool, an inner tie rod end tool, to complete the job (this can be rented for free at your local parts store). The job straight forward and anyone with basic tools can do it! **If the video helped, please give it a "thumbs up" and consider subscribing. Leave any questions or comments below and I will answer them as well.** Follow me on Facebook: https://www.facebook.com/chrisfix8 Follow me on Twitter: https://twitter.com/ChrisFixed Subscribe: http://www.youtube.com/subscription_center?add_user=paintballoo7 How to replace Drum Brakes: https://www.youtube.com/watch?v=3FYRwfKNHxw How to replace Differential Fluid: https://www.youtube.com/watch?v=KmqMUJb-E4M How to fix a Squeaky Belt: https://www.youtube.com/watch?v=UF3W-vHPYHg How to replace a Wheel Bearing: https://www.youtube.com/watch?v=BPs-QALECqs Replacing a Rack & Pinion Type Inner Tie Rod DIY, How to change a tie rod on your vehicle, tie rod replacement, tie rod end replacement, tie rod end check, tie rod noise, tie rod end removal, tie rod end, tie rod removal, tie rod adjustment, tie rod, fix tie rod, tie rods, tie rod ends, inner tie rod, outer tie rod, tierod, toyota camry alignment, tj death wobble, yukun tie rod, u-joint replacement, ball joint separator, bellows boot, steering rack boot, camry tie rod, k30 tie rod, steering parts, alignment wheel, wheel alignment, satrun tie rod, saturn tie rod, tierod adjustment, tie rod adjustment, tie-rod, separate tie rod, tie rod separator, tie rod adjuster, Disclaimer: Due to factors beyond the control of ChrisFix, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ChrisFix recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ChrisFix.





How to Tint a Door Window
Please SUBSCRIBE! :) Tag all your tinted car photos #TintTurf Join the Tinternet on Facebook! http://Facebook.com/Groups/Tinternet Find a Tint Shop near you! http://www.TintTurf.com Thanks for watching. I wanted to try a different style of video. This was a police 2012 Ford Taurus. it was originally tinted it in 20% and they wanted it just a bit darker so they went with 15% Featured Video: http://youtu.be/bEeG34Q2B28 Last Video : http://youtu.be/13LweSYCUDI Follow me on Twitter and Instagram: @TintStuff Join the Tinternet on Facebook! http://Facebook.com/Groups/Tinternet





Does Lacquer Thinner Clean Catalytic Converters? -EricTheCarGuy
Link to Scotty Kilmer's Video: http://www.youtube.com/watch?v=5icTmYItwiE After watching Scotty's video I was curious if it would actually work. Since we know from my video on diagnosing catalytic converters that the catalytic converters in my Subaru were bad, I though it was a perfect opportunity to try out this theory. I used about 1 quart of lacquer thinner to about 7 gallons of gas. I drove a total of 200 miles and tested the converters. The testing showed a very slight improvement but nothing that I would call significant. It was worth a try. I can say that I did not notice any issues with drivability during or after the test. It may not have fixed the problem, but it didn't seem to cause any other problems either. I feel the check engine light that came on was just a coincidence and not the result of putting lacquer thinner in the gas tank. Here's some useful links for you. Diagnosing a P0420: http://www.youtube.com/watch?v=9VZ5K8n5jj0 Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/47854- does-lacquer-thinner-clean-catalytic-converters#77372 The best place for answers to your automotive questions: http://www.ericthecarguy.com Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





Restore Bad Car Paint with Plasti Dip
Repaint your own car. Faded paint, faded clear coat, bad paint, bad clear coat, restoration do it yourself car painting using Plasti Dip and DipYourCar.com's Pro Car Kit. Peel Coat





What Happens When You Don't Change Your Oil Part 1
This is part 1 of what happens when you do not change your oil. This car is only 3 years old and has 135k miles on it.





Which car is faster? Which Car is Faster?




Similar 1/4 mile timeslips to browse:

1996 Ford Thunderbird Dragster: 6.540 @ 219.000
Mark Wolfe, Engine: 428 small block ford, Turbos: 80mm turbonetics Tires: Goodyear


1934 Ford 3 Window-Coupe : 7.050 @ 186.000
Claude Beaulieu, Engine: 509cid,


1984 Ford Thunderbird Coupe: 7.950 @ 176.000
Mike Thompson, Engine: 632 Chevy,


1986 Ford Thunderbird : 8.570 @ 159.780
bill muchow, Engine: 605 ford, Tires: 33 / 15 /15 goodyears


1988 Ford Thunderbird alston chassis: 8.938 @ 154.980
kevin brong, Engine: 502, Tires: good year 33x17x15


1984 Ford Thunderbird : 8.980 @ 151.000
Chris Karras,


1985 Ford Thunderbird turbo coupe: 9.000 @ 134.590
morris, Engine: 466, Tires: m/t


1986 Ford Thunderbird : 9.330 @ 144.510
Henry Jones, Engine: 438 Dart Ford Race sm block, Supercharger: none Tires: 15x14x31


1934 Ford 3 Window-Coupe : 9.590 @ 141.000
Steve Duber, Engine: 406 SBC,


1934 Ford 3 Window-Coupe Coupe: 9.622 @ 192.800
Van Macatee, Engine: 455 BIG BLOCK,


2005 Ford GT Supercharged Twin Turbo Nitrous: 9.721 @ 149.840
Mullet, Engine: 5.4L Supercharged Twin Turbo V8, Tires: 305/35/19 ET Streets


1984 Ford Thunderbird : 9.740 @ 137.000
Bernie LeMay III, Engine: 355 SBC, Tires: M/T 28 x 9.0 / 15


1988 Ford Thunderbird turbocoupe: 10.000 @ 133.000
nick, Engine: 351 clevland, Tires: m/t 30-9 m/t 27.5


1987 Ford Thunderbird : 10.070 @ 131.012
clint stacey, Engine: 351 stroked to 408. 12.5 compression, Tires: 30x9x15 back 26x4.5x15 front


1984 Ford Thunderbird coupe: 10.240 @ 130.290
kevin brong, Engine: 514 stroker, Tires: good year


2005 Ford GT Twin Turbo Supercharged: 10.270 @ 146.480
Mullet, Engine: V8 Supercharged and Turbocharged,


2005 Ford GT Twin Turbo: 10.480 @ 144.950
moeinox, Engine: V8 Twin Turbo, Tires: drag radials


2005 Ford GT Pulley, Tune, Exhaust: 10.636 @ 132.210
FikseGTS, Engine: 5.4L Supercharged V8, Tires: Bridgestone Potenza RE050A


2005 Ford GT Pulley and Tune: 10.637 @ 133.210
typeshatch, Engine: V8 Supercharged 5.4L, Supercharger: Pulley 2.75 Tires: drag radials


2005 Ford GT PPR Twin Turbo: 10.650 @ 155.310
PPR, Engine: V8 Twin Turbo,


 


©2014 DragTimes - Disclaimer