Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

How To Replace Drum Brake Shoes (Full) - EricTheCarGuy

How To Replace Drum Brake Shoes (Full) - EricTheCarGuy http://www.ericthecarguy.com/ Here is a full length version of a video that I posted some time ago, this way you can watch the entire thing in one sitting instead of switching from one video to the next. If your watching this for the first time I'm aware that sandals are not the best thing to wear when doing auto repair. In addition there IS a jack stand just out of frame in the video I just leave the floor jack in place while I work normally where it is so that it's quicker to let the car down when I'm done. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.


 


More Videos...


How To Replace Rear Disc Brakes (Full) - EricTheCarGuy
How To Replace Rear Disc Brakes (Full) - EricTheCarGuy http://www.ericthecarguy.com/ I had to split this one into 3 parts when I first posted it and I'm happy to bring it to you now in it's full form. Enjoy. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





AC Clutch Repair and Noise Diagnosis -EricTheCarGuy
This one starts out as a noise diagnosis that ends up working in an AC clutch repair on a 1998 Acura 3.2 TL. In addition to the AC compressor clutch, we also talk about repairing the AC belt idler pulley and other possible noises during AC operation. So if you ever need to replace an AC compressor clutch or have a noise coming from the idler pulley on your AC system, this video is for you. Here's some useful links. Snap Ring Pliers: http://www.jbtoolsales.com/kastar-1435-snap-ring-pliers/#oid=1002_1 The Basic Principals of AC: http://www.youtube.com/watch?v=w17DpGCcRj8 AC Performance Testing: http://www.youtube.com/watch?v=XU_A4wNuHXI Finding and Repairing AC Leaks: http://www.youtube.com/watch?v=95RdGLFIbL8 Recharging an AC System: http://www.youtube.com/watch?v=lglPJuBXVeE Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/47966- ac-compressor-clutch-and-noise-repair#78241 The best place for answers to your automotive questions: http://www.ericthecarguy.com Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





Easy Rust Repair the 'Hack' Way -EricTheCarGuy
As you may know my 1993 Acura Vigor had some pretty bad water leaks into the trunk due to rust issues. To repair them I needed to do a little body work. In this video I show how to do body work using 'hack' methods to get you by. In order to do this 'properly' it would have been best to cut out the old rusted material and weld in new metal. I didn't feel that my $500 Acura Vigor was worth that effort so I did what you see here in this video. As stated this method works very well for floor pans or other areas where you're not necessarily going to see the finished product. Honestly, I don't think things turned out so bad, in fact, I have a new appreciation for the car now that I've done this work, despite the fact that the paint doesn't' match. Perhaps one day I'll go back and finish it properly and respray the entire car. For now, I have other work to do to keep this car in good working order. Camera: Brian Kast If you want to see how real body work is done? Check out my friend Donnie Smith's channel. https://www.youtube.com/channel/UCzA2PE7vg9R_ebLiBSjCxEw The best place for answers to your automotive questions: http://www.ericthecarguy.com There is an extended version of this video available to Premium Members of EricTheCarGuy.com. Click here: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Related Videos. Finding Water Leaks: https://www.youtube.com/watch?v=tecuW9cB-Xk Introduction to my Acura Vigor: https://www.youtube.com/watch?v=GgKqLr353VY Tools. Angle Die Grinder: http://www.jbtoolsales.com/ingersoll-rand-301b2mk-air-angle-die-grinder-2-k it/#oid=1002_1 Cutting Bits (with die grinder set): http://www.jbtoolsales.com/astro-pneumatic-219-onyx-3-piece-die-grinder-kit /#oid=1002_1 Pneumatic sander: http://www.jbtoolsales.com/performance-tool-m573db-5-high-speed-sander/#oid =1002_1 Blow Gun: http://www.jbtoolsales.com/titan-tools-19360-air-blow-gun-4/#oid=1002_1 Dust Mask: http://www.jbtoolsales.com/sas-safety-2661-50-professional-blue-half-mask-r espirator-medium/#oid=1002_1 Filler applicators: http://www.jbtoolsales.com/performance-tool-w407c-3-pc-body-filler-applicat or/#oid=1002_1 Fillers. Rust inhibitor: http://www.jbtoolsales.com/permatex-81849-rust-treat-body-fillr-com-each/#o id=1002_1 Fiber Strand: http://www.westmarine.com/putties-sealers/3m--dyna-glass-filler-qt--1165647 7 Tiger Hair: http://www.handsontools.com/Evercoat-1189-Tiger-Hair-Long-Strand-Reinforced -Filler-quart_p_10737.html Related Articles. Finding and Fixing Leaks: http://www.ericthecarguy.com/faq/finding-and-fixing-leaks Discussion about this video: http://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/51619- easy-rust-repair-the-hack-way#100004 EricTheCarGuy code lookup: http://www.ericthecarguy.com/obd-code-lookup Facebook: https://www.facebook.com/EricTheCarGuy?fref=ts Twitter: https://twitter.com/EricTheCarGuy Google+: https://plus.google.com/100195180196698058780/posts Information on Premium Membership: https://www.ericthecarguy.com/premium-content-streaming-etcg-content Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





How To Recharge an AC System - EricTheCarGuy
Visit me at: http://www.ericthecarguy.com/ Finding leaks video: http://www.youtube.com/watch?v=95RdGLFIbL8 Basics of AC: http://www.youtube.com/watch?v=w17DpGCcRj8 AC Performance Test: http://www.youtube.com/watch?v=XU_A4wNuHXI AC pressures: http://www.aircondition.com/tech/questions/82/ AC pressures 2: http://www.idqusa.com/faqs.php?faq=74&faq_id=74&category_id=18 As I said in the video you need to be responsible when dealing with refrigerant, also in some locations it's not legal for you to perform your own AC work so keep that in mind and observe your local laws. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





How to Change Drum Brakes (In-depth, ultimate guide)
Replace the wheel cylinders: http://youtu.be/GIWYkCOPAQ0 Replace Different Brake Drums: http://www.youtube.com/watch?v=zJ_UXP6GWkw This is an in-depth "how to" video on how to change the drum brakes. It is specifically for a Ford Ranger and Mazda B series pickup truck, but it applies to most other cars as well. YOU CAN DO THIS. No special tools required and it will save you a lot of $$$$. **If the video helped, please give it a "thumbs up" and consider subscribing. Leave any questions or comments below and I will answer them as well.** Follow me on Facebook: https://www.facebook.com/chrisfix8 Follow me on Twitter: https://twitter.com/ChrisFixed Subscribe: http://www.youtube.com/subscription_center?add_user=paintballoo7 Disclaimer: Due to factors beyond the control of ChrisFix, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ChrisFix recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ChrisFix.





How to Remove a STUCK Drum Brake
How to remove a stubborn brake drum, Stuck Brake Drums Removal, Removing Brake Drums, The "Easy" Way, STUCK DRUM BRAKE? how to get it off!, How to Remove Stubborn Drums Watch how to remove a brake drum that is stuck on. I go through the steps so anyone can remove their drum brake. First try to get it off by wiggling back and forth. Then spray penetrating oil to remove rust between the drum and the seat. Then hit it with a hammer hard. This should free the drum if it is just rusted on. If the drum doesn't come off, then your brakes are probably stuck open preventing the drum from coming off. If this is the case, cut or drill out the holding pins from the back (that hold the shoes in place) and remove the screws to the brake cylinder and then pull the drum off. **If the video was helpful, please give it a "thumbs up" and consider subscribing. Leave any questions or comments below and I will answer them as well.** Follow me on Facebook: https://www.facebook.com/chrisfix8 Follow me on Twitter: https://twitter.com/ChrisFixed Subscribe: http://www.youtube.com/subscription_center?add_user=paintballoo7 How to remove a stubborn brake drum, Stuck Brake Drums - Removal, Removing Brake Drums, The "Easy" Way, STUCK DRUM BRAKE? how to get it off!, How to Remove Stubborn Drums, drum brake, drum brake replacement, brake drum forge, rear brake adjustment, change brake pads, rebuild wheel cylinder, civic drum brake, aveo rear brake, brake drum stuck, brake drums stuck, brake drum removal, removing brake drums, siezed brake drums, stuck brake, loosening brake adjuster Disclaimer: Due to factors beyond the control of ChrisFix, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ChrisFix recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ChrisFix.





How to Replace Drum Brakes - AutoZone Car Care
http://www.autozone.com/autozone/parts/Brakes-and-Traction-Control/_/N-8ms9 r In this step-by-step guide, AutoZone shows you how to properly remove and replace drum brake shoes. Get everything you need to do the job right at http://www.autozone.com





How to Change Tie Rods (inner and outer tie rod ends)
How to replace inner and outer tie rods, How to replace tie rod ends, How to replace tie rods. How to check to see if your tie rod is bad: https://www.youtube.com/watch?v=brI2feYiEi8 Tie Rod End Cutaway: https://www.youtube.com/watch?v=3RjhtVse6jE This video will show you in depth how to change the inner and outer tie rods of your car or truck. You need a special tool, an inner tie rod end tool, to complete the job (this can be rented for free at your local parts store). The job straight forward and anyone with basic tools can do it! **If the video helped, please give it a "thumbs up" and consider subscribing. Leave any questions or comments below and I will answer them as well.** Follow me on Facebook: https://www.facebook.com/chrisfix8 Follow me on Twitter: https://twitter.com/ChrisFixed Subscribe: http://www.youtube.com/subscription_center?add_user=paintballoo7 How to replace Drum Brakes: https://www.youtube.com/watch?v=3FYRwfKNHxw How to replace Differential Fluid: https://www.youtube.com/watch?v=KmqMUJb-E4M How to fix a Squeaky Belt: https://www.youtube.com/watch?v=UF3W-vHPYHg How to replace a Wheel Bearing: https://www.youtube.com/watch?v=BPs-QALECqs Replacing a Rack & Pinion Type Inner Tie Rod DIY, How to change a tie rod on your vehicle, tie rod replacement, tie rod end replacement, tie rod end check, tie rod noise, tie rod end removal, tie rod end, tie rod removal, tie rod adjustment, tie rod, fix tie rod, tie rods, tie rod ends, inner tie rod, outer tie rod, tierod, toyota camry alignment, tj death wobble, yukun tie rod, u-joint replacement, ball joint separator, bellows boot, steering rack boot, camry tie rod, k30 tie rod, steering parts, alignment wheel, wheel alignment, satrun tie rod, saturn tie rod, tierod adjustment, tie rod adjustment, tie-rod, separate tie rod, tie rod separator, tie rod adjuster, Disclaimer: Due to factors beyond the control of ChrisFix, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ChrisFix recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ChrisFix.





Installing Front Disc Brakes - AutoZone Car Care
http://www.autozone.com/autozone/brakeJob/brakeJob.jsp In the second installment of the AutoZone Complete Car Care - Brake Job Series, Bruce Bonebrake shows you how to inspect your disc brake system. Learn how to replace brake pads and brake rotors in this step-by-step video. Get everything you need to do the job right at http://www.autozone.com





How to bleed brakes using the " One person " method
One person brake bleeding method used to purge air from brake lines. This method can also be used to change the brake fluid





Replacing a wheel bearing
Replacing a wheel bearing in a 2001 Buick Lesabre





How to clean a throttle body and Idle air control valve (iac)
*** PLEASE READ *** In this video demonstration, I show how to get to, remove, clean, and replace the throttle body and idle air control motor (aka IAC) on a 4.2l ford motor. This procedure is the same for any fuel injected vehicle. * * * Check out my website krkvideos.com * * * The vans require removal of alot more stuff just to access the throttle body. A dirty IAC can cause a rough idle. A dirty throttle body can harm performance and cause rough engine operation. When the throttle body or iac is removed a new gasket must be used to properly seal the connection to the intake. GM idle air motors are generally mounted on the throttle body and can be cleaned without removal from the throttle body. This means one less gasket and a lesser chance of creating a vacuum leak. The ford throttle body had a note on it that said it was not to be cleaned because the coating on the throttle blade might be damaged. Thats fine for a new car but that has to be disregarded when working on something that has some miles on it. Subscribe to my channel. * * * Definitions: * * * MAF - Mass Air Flow sensor - Monitors the amount of air the engine is intaking. IAT - Intake Air Temperature - Measures the temperature of the air the engine is intaking. IAC - Idle air control - Controls the amount of air the engine is intaking while it is idling. Throttle body - Responsible for regulating flow of air into the engine as you press the gas pedal. TPS - Throttle position sensor - Tells the computer how far you are opening the blade in the throttle body so it can add more fuel to compensate the added air. * * * Visit krkvideos.com for more! * * * * * * Visit krkvideos.com for more! * * * * * * Visit krkvideos.com for more! * * *





How to replace drum brakes, wheel cylinders and front pads GM
Welcome back, in this video I demonstrate how I replace drum brake wheel cylinders, brake shoes and front pads, on a 1999 Gmc suburban, in addition I use one of my favorite techniques called gravity bleeding to remove the air from the brake system, hope you enjoy





How to Change Drum Brakes (In depth, ultimate guide) 2
How To Replace Drum Brake Shoes, Drum brake replacement, How to replace drum brakes, This is an in-depth "how to" video on how to change the drum brakes. It is specifically for a Ford and Mazda, but it applies to most other cars as well. YOU CAN DO THIS. No special tools required and it will save you a lot of $$$$. **If the video was helpful, please give it a "thumbs up" and consider subscribing. Leave any questions or comments below and I will answer them as well.** Follow me on Facebook: https://www.facebook.com/chrisfix8 Follow me on Twitter: https://twitter.com/ChrisFixed Subscribe: http://www.youtube.com/subscription_center?add_user=paintballoo7 Brake Drum Replacement: http://www.youtube.com/watch?v=3FYRwfKNHxw How to Replace the Wheel Cylinders: http://www.youtube.com/watch?v=GIWYkCOPAQ0 How to change Brake Pads: http://www.youtube.com/watch?v=4DvuUmcslfM How to Quiet Squeaky Belts: http://www.youtube.com/watch?v=UF3W-vHPYHg Disclaimer: Due to factors beyond the control of ChrisFix, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ChrisFix recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ChrisFix.





How to Replace a Wheel Cylinder
Fixing Leaking Brake Wheel Cylinders The wheel brake cylinder is vital to your drums braking capability. In this video I show you the process of replacing the drum brake wheel cylinder. It is easy to do and anyone can do it. It takes about an hour if you take your time. To learn how to change your drum shoes (remove the springs to get to the wheel cylinder), click the link below. http://www.youtube.com/watch?v=3FYRwfKNHxw **If the video helped, please give it a "thumbs up" and consider subscribing. Leave any questions or comments below and I will answer them as well.** Follow me on Facebook: https://www.facebook.com/chrisfix8 Follow me on Twitter: https://twitter.com/ChrisFixed Subscribe: http://www.youtube.com/subscription_center?add_user=paintballoo7 How to replace a wheel cylinder, wheel cylinder, brake cylinder, how to fix a wheel cylinder, how to fix rear brakes, how to fix drum brakes, drum brake cylinder, drum brake piston, drum brake adjustment, brake cylinder fix, cylinder, brake, rear, truck, ford, mazda, bleed brakes, bleed, brakes, break, bleeder, bleed, bleed wheel cylinder, replace wheel cylinder, put in wheel cylinder, install wheel cylinder, install, Fixing Leaking Brake Wheel Cylinders, Due to factors beyond the control of ChrisFix, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ChrisFix recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ChrisFix.





Which car is faster? Which Car is Faster?




Similar 1/4 mile timeslips to browse:

1991 Dodge Daytona : 8.180 @ 165.000
Jim Clarke, Engine: 572, Supercharger: - Turbos: - Tires: Hoosier 16 x 33 x 15


1986 Dodge Daytona Super Pro: 8.420 @ 159.860
Mike Halverson, Engine: 540 dodge, Turbos: n/a Tires: goodyear 14.5-32


1986 Dodge Daytona : 9.200 @ 147.460
glenn leber, Engine: 440, Tires: 28.5 x13.5 et streets


1987 Dodge Daytona Shelby Z: 9.860 @ 135.150
Dean Stillie, Engine: 2.4, Turbos: Holset hx40 Tires: Hoosier 12x29x15


1984 Dodge Daytona : 10.330 @ 127.840
Glenn Smith, Engine: 2.2 turbo, Turbos: super 60 Tires: 33 by 16 Hoosier


2004 BMW Z4 3.0 6sp: 11.590 @ 115.800
CJ, Engine: 3.2 E46 M conversion, Turbos: VF34 Tires: Pilot 0


1967 Pontiac Catalina : 11.820 @ 115.450
Ian Jacques, Engine: 400C.I.+.030, Tires: 255/60/15 B.F. goodrich drag radials


1962 Pontiac Catalina 2-DR hardtop coupe: 11.850 @ 115.000
Gary L. Franks, Engine: 389 cubic inch; 318 BHP (factory rating), Tires: Drag Slicks


1993 Dodge Daytona IROC R/T: 12.595 @ 112.595
mike, Engine: 2.2 lotus head, Supercharger: no Turbos: enforcer 2 Tires: 23X7.5X15


2011 BMW Z4 Sdrive 35i: 12.611 @ 111.300
33llipsi5..., Engine: Stock, Turbos: Stock Tires: OEM 18


1993 Dodge Daytona IROC R/T: 12.782 @ 109.680
Mike, Engine: 2.2 lotus, Turbos: enforcer 2 Tires: M&H 23x7x15


1987 Dodge Daytona Shelby Z: 12.900 @ 106.530
Paul Velliky, Engine: 2.2, Turbos: T-3/T-4 hybrid Tires: M/T 22-8-15


2004 BMW Z4 3.0 SMG: 12.900 @ 106.000
Eric, Engine: Dinan free flow throttle body,


2011 BMW Z4 sDrive35is: 12.901 @ 109.910
NA, Engine: Inline 6 Twin Turbo: 335 HP,


2010 BMW Z4 sDrive35i: 13.310 @ 106.710
NA, Engine: V6 Twin Turbo, 300HP, Tires: Bridgestone Potenza RE050A


2004 BMW Z4 3.0 SMG: 13.500 @ 103.000
Eric, Engine: 3.0,


2007 BMW Z4 3.0si: 13.810 @ 100.020
NA, Tires: Bridgestone Potenza RE050A RTF


1991 Nissan Stanza : 13.840 @ 103.990
Andy Gussie, Engine: KA24E, Turbos: Garrett T3


1992 Dodge Daytona Iroc R/T: 14.010 @ 101.870
Christian Schuster, Engine: 2.2L DOHC 16V, Turbos: Stock Tires: 205-55-zr16 Michellin XGTZ


2007 BMW Z4 3.0si: 14.010 @ 100.120
NA,


 


©2014 DragTimes - Disclaimer