Uphill Sand Dragrace. Liwa 2014
Moreeb Dune, Liwa 2014. United Arab Emirates
6cylinder Big turbo Toyota and Nissan
V8 Category starts at 14min.
Filmed and edit by Peter Björck. Bjp Race.
The Prelude Project - Building a 500 HP Honda Prelude Chrome Drag Car
Voyles Performance First build - We are taking a 1998 Honda Prelude and
turning it into a 500 HP Boosted
drag car. And then we're wrapping it in chrome. Way more to come. At
Voyles Performance we offer tuning for both Imports and Domestics,
Hydrographic Dipping, Effects, and Audio. For more info please contact us
Ed Voyles Honda
2103 Cobb Parkway SE
Marietta, Georgia 30067
Rear Window Defroster
16 Inch Wheels
2.2L I4 DOHC 16V FI Engine
Premium Unleaded Fuel Required
5-Speed Manual Transmission
Driver and Passenger Front Airbags
Anti-Theft Alarm System
Remote Trunk Release
Tilt Steering Wheel
Leather Steering Wheel Trim
Intermittent Windshield Wipers
Power Door Locks
Power Exterior Mirrors
AM/FM/CD Audio System
Available Optional Features
AM/FM/Cassette Audio System
Compact Disc Changer
4-Speed Automatic Transmission
Width: 69.0 in.
Height: 51.8 in.
Length: 178.0 in.
Ground clearance: 5.7 in.
Curb weight: 2954 lbs.
Wheel base: 101.8 in.
Rear hip Room: 41.0 in.
Rear head room: 35.3 in.
Rear leg room: 28.1 in.
Rear shoulder room: 50.0 in.
Base engine type: gas
horsepower: 195 hp
@ 7000 rpm
Torque: 156 ft-lbs. @ 5250 rpm
Turning circle: 36.1 ft.
Fuel type: gas
Fuel type: regular unleaded
Fuel tank capacity: 15.9 gal.
How To Do A Valve Adjustment On Your Honda Prelude H22 BB6
Knowing how to do a valve adjustment can save you a lot of worry and
headache. The Honda Prelude is known for its H22 engine. Taking care of the
H22 will provide you with years of reliability and performance.
Doing routine valve adjustments will keep your car running at peak
performance. The H22 2.2 Liter VTEC engine can also fit into other cars as
well, so even though this video is for a Honda Prelude BB6, if you have a
H22 then this video is for you.
This is a complete H22 valve adjustment guide with valve cover gasket
Nathan Riddle - Black
Nathan Riddle - I can do better
Nathan Riddle - Reptile
Nathan Riddle - Mei-Yuen
Niki Kofman - Moonlight
Niki Kofman's channel: http://www.youtube.com/user/NKofman
ONLY ADJUST VALVES WHEN THE ENGINE IS COLD, or less than 100 degrees
Fahrenheit or (38 degrees Celsius) .
Intake: 0.15 - 0.19 mm (0.006 - 0.007 in)
Exhaust: 0.17 - 0.21 mm (0.007 -0.008
Valve Cover torque specs: 8.7 lbf-ft
Ignition wire cover: 7.2 lbf-ft
Alternator Terminal: 6 lbf-ft
After adjusting the valves torque down the crankshaft pulley bolt to 245
N-m (181 lbf-ft)
07JAB-001020A Honda pulley bolt holder handle
07NAB-001040A 50mm Holder Attachment
Tools you'll need:
***Valve adjustment tool: 10mm***
1/2 inch ratchet
3/8 inch ratchet
1/4 inch ratchet
1/2 inch long extension
1/2 inch medium extension
3/8 inch long extension
3/8 inch short extension
1/4 inch short extension
3/8 inch Torque wrench that starts at least 20inch pounds
1/2 inch 19mm deep socket
3/8 inch 5/8 inch spark plug remover socket
1/4 10mm deep socket
1/4 10mm standard socket
1/4 8mm standard socket
Honda liquid gasket
Valve cover gasket with washers and seals
Canon T2i 24-70 2.8L
2001 Honda Prelude Start Up, Quick Tour, & Rev With Exhaust View - 92K
2001 Honda Prelude
My Fan page: https://www.facebook.com/pages/Intechdude300/294626333932309
2theRedline fan page: https://www.facebook.com/2Redline
The new 2theRedlineLLC channel: http://www.youtube.com/user/2theRedlineLLC
My personal Instagram: http://instagram.com/lilochris13
Intechdude300 on Twitter: https://twitter.com/Intechdude300
Nyce1s - Insane Twin Turbo Mustang Goes Airborne @ Lights Out 4 - Driver Jere Etheridge....
Here we have driver Jere Etheridge and his Twin turbo Ford Mustang as he pulls off probably one
of the craziest wheel stands we have ever seen here at Nyce1s! This
happened during the annual Lights Out 4 radial event @ South Georgia
Motorsports Park! Check it out and be sure to leave your comments. The
driver was okay.
Checkout Nyce1s @ http://www.facebook.com/nyce1s !!
Checkout Duck X Productions @ http://www.duckxproductions.com !!
New 2015 Ford Mustang Test 'n Tune Drag Racing
A mixture of different 2015 Ford Mustangs from the folks at
AmericanMuscle.com and Revolution Automotive along with a few others head
out for a little test n tune! All of the cars are bone stock from what
we're told. Be on the lookout in the coming weeks for some modded passes!
Shoutout to Rob Rabon Photography for the thumbnail pic, check out more of
his photography here:
Don't forget to SMACK that LIKE button and SUBSCRIBE for more!
Check out our Vlog channel!!: https://www.youtube.com/KleibVlogs
Kleiber Motorsports is the home of everything FAST!! Click "Subscribe" to
stay updated. It's free!! Also, feel free to check us out on Facebook,
Twitter, and Instagram at our addresses below!
Check us out on
Our Channel: http://www.youtube.com/bigkleib34