RX3 Police Chase Sydney West
RX3 13B Peripheral Port Rotory motor 400HP Police chase.Skip to the chase
it starts at 4.35 sec.
"Attention all", to this day the report of this police chase cannot be
revealed or explained in full detail, what occurred on that day after
the hit accident was even bigger than the chase itself. This video was
edited for public viewing only...
Part 12: 13B Rotary Engine Rebuild - My 76 Mazda RX-5 Cosmo Restoration
Just as I promised last episode, it is finally time to build the engine!
Part 12 of my RX-5 Cosmo restoration covers the entire process of building
the 6 port 13B Mazda rotary engine. While this engine is a hybrid of GSL-SE
RX-7 and Cosmo parts, the process is the same for any rotary from a 12A to
a 13B NA, 13B turbo, 13B-REW or any
other variant of the 13B. This video shows the whole process of the engine
build, starting from measuring the rotors and covering everything else
including clearancing the side seals, assembling the rotors, complete
assembly the short block, setting the eccentric shaft end play and
installing the front cover and everything underneath it. It's probably the
most complete engine build video outside of what you can buy from the
vendors, and as such, is an hour long. After this one, I'm going back to
videos under 20 minutes. But for now, grab a beverage of your choice, sit
back, and enjoy.
dx 13b bridgeport 4th gear skid .MOD
my dx 13b bridgeport with 55mm weber side draught that i recently got so
put it on to tune it got it going all good so got a vid before i take it
off for the injection also running s4 na gearbox now , bumpers finally lol,
drop tank n afew other things
Turbo Peripheral Port Start-up and Idle
To the Youtube 'tards: This was a quick first start up video before
everything was assembled. The intake plenum, tubing, and coolant lines were
installed after the bugs were worked out.