1983 Monte Carlo with 565 Big Block Chevy with more detailing.
Did some detailing on the car: redid my dash with removable gauge inserts
that I made out of aluminum. Then I bought new anodized valve covers and
stripped and polished them,added borgenson steering shaft, braided power
steering hoses, added second fuel system for Nitrous,dual hood lights,made some hood vents out
of aluminum. etc. So I fired it up to adjust my vacuum pump (probably
pissed off my neighbor).
Insane 1970 Monte Carlo 454 SS Test Drive www.dreamcarreview.com SOLD
We took this INSANE 1970 Monte Carlo out for a test drive and I could
barely handle it. Not because it's not an incredible car, but because I'm
a normal guy used to sports cars and I have never been in anything quite
like this. I had a blast, but would have loved some "pro-street" driving
lessons and a quarter mile track not to mention at least a full tank of gas
before we left! ;)
What an amazing car and the price is unbelievably low so check out the site
if you're interested, the last one like this was gone in 14 days.
THIS MONTE CARLO COMES WITH A 454 .030 OVER 4 BOLT MAIN MACHINED FO MILODON
SPLAYED CAPS, 400 turbo KEVLAR BAND,
CLUTCHES, HUGHES 9.5 INCH 4,000 STALL CONVERTER WITH AUTO VALVE BODY, FORD
9 INCH REAR END 4.56 GEARS FULL STEEL 31 SPLINE SPOOL STRANGE AXLES,4 WHEEL
DISC BRAKES LADDER BARS WITH WISH BONE LOCATOR, BARRY GRANT FUEL SYSTEM -10
FEED TO CARB AND -8 RETURN TO A 15 GALLON ALUMINUM FUEL CELL W/SENDER, AND
MUCH MUCH MORE
1983 Monte Carlo Pro-Street 502 BBC
1983 Pro-Street Monte Carlo 502, M/T ET Street tires 32x17.5-15LT, 400 turbo with tran brake, Biondo delay box
with electric shifter. Driven to the track and runs 10:60s or 10:30s
depending on carb set-up
Inside Look at Building a Reliable and Professional Stroker Engine
STATEMENT- If you are in the market and unsure what to look for or what the
company can offer allow us the opportunity to educate you. As always we
want each and every enthusiast to buy with confidence.
This video illustrates the various steps that need to be taken to build a
powerful and reliable engine combination. Prestige Motorsports builds
engines for all varieties of street and offroad uses but the process never
cuts the crutial coners that create future failures. Every engine goes
through hours of precise machining, cleaning, QC and strategic assembly.
CALL US AT 704 782 7170 OR VISIT OUR SITE www.prestigemoto.com
1985 chevy monte carlo big block
Just some pics of my build up on my ss. car is being redone from top to
bottom. 454 .30 over 460 cu in ford 9 inch rear end. mild street motor.
8.8:1 this will be a street car not a track car. part one more to come when
the car goes to paint.......
1985 Chevrolet Monte Carlo SS 385 HP 350 V8 Nitrous
I thought you might like a look at this very quick 1985 Chevrolet Monte
Carlo SS. It's powered by a 385 horsepower 350 small block
that is equipped with a 125 shot of Nitrous, a Holley four barrel, long tube headers,
etc. All that power is sent through a turbo 400 automatic back to a set of 3.73 gears
with posi. The burgandy paint still looks slick and it has a nice original
interior as well. I hope you find it interesting...thanks for watching!
Filmed at Gateway Classic Cars near St Louis, MIssouri
The background music track is Whiskey on the Mississippi by Kevin MacLeod.
Available under the Creative Commons Attribution 3.0 Unported license.
Instruments: Guitar, Bass, Kit, Organ, EP
With a jumping bass and off-beat syncopation, this is straight from
Memphis' Beale Street. The Hammond organ and electric guitar play together
as longtime friends, while the melody changes hands from guitar to organ to
electric piano. 011
Bouncy, Grooving 2010
1986 Chevrolet Monte Carlo SS All Street Project Car
This is my 1986 Chevrolet Monte Carlo SS. I have owned this car for 13
years and it has been in the family for over 26 years. The car has just
under 29,000 original miles. The engine and drivetrain is all original as
well as the paint and interior. I didn't drive the car much, so I decided
to make a few subtle changes, mostly in the stance, so I would drive it
more. Just don't care for the stock stance on these cars. For the front I
used 2" drop Belltech spindles and 1" drop Belltech springs. For the rear I
used OPG 3" drop rear springs. 3" total drop front and rear. I used
Belltech Street Performance shocks on all four corners. The wheels are
Center Line Retros 18 x7 front, 18 x 8 rear. Nitto NT555 tires 225/45 in
the front, 255/45 in the rear. Also for a little more sound, I went with
Flowmaster Super 40 mufflers and custom tailpipes. I drive the car a lot
now just cause I enjoy it so much more. I didn't cut anything and I have
everything to put the car back original if I ever decide to in the future.
Thanks for looking!
Chevy Big Block Engine Starting
We just finished our new Chevy Big-Block engine, wich will soon find a home
in our 1980 Camaro. It
is just one of many BBC's that I have built. It is a "street friendly" 10:1
all forged, mechanical roller with too many goodies to list . It sounds
crazy and I can't wait to feel the tire shreading performance.
632 big block 1957 chevy
632 big block from shafiroff. art morrison chassis. billet specialties 18's
Full build video: THE NEIGHBORHOOD MENACE
Taking the 57 for a drive