Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

HOW A CLUTCH WORKS

HOW DOES A AUTOMOTIVE CLUTCH WORKS


 


More Videos...


2000 Honda Civic Si 1.6L Clutch Install
This video is a 2000 Honda Civic Si 1.6L clutch installation with Gary Croyle. The clutch set used was a part number MU70137-1 (Brute# 92329). An image of the clutch set can be found at the following link: http://perfectionclutch.com/applookuptest/images/MU70137-1-1.jpg --------------------------- The clutch diameter and dimensions are as follows: 8-5/8" Diameter x 24 Teeth x 1-1/32" Hub ---------------- This clutch set fits the following vehicles: ACURA INTEGRA GSR L4 1.8L GAS N 1997-01 HONDA CIVIC DEL SOL VTEC L4 1.6L GAS N 1994-95 CIVIC SI L4 1.6L GAS N 1999-00 CR-V EX L4 2.0L GAS N 1998-01 CR-V LX L4 2.0L GAS N 1997-01 CR-V SE L4 2.0L GAS N 2000-01





Learn How A Clutch Works In Less Than 5 Minutes - EricTheCarGuy
Learn How A Clutch Works In Less Than 5 Minutes - EricTheCarGuy http://www.ericthecarguy.com/ This one is actually part of a series on clutches so be sure to check out the Integra full length clutch video as well as Adjust A Cable Operated Clutch. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





► Mercedes-AMG Engine Factory
Mercedes-AMG Engine Factory - V8 engine Site Affalterbach ► SUBSCRIBE NOW: http://www.youtube.com/subscription_center?add_user=youcarpress ► FACEBOOK: http://www.facebook.com/youcarpress ► TWITTER: http://www.twitter.com/youcartv ► GOOGLE+: http://goo.gl/HpsSa9





How to Change Tie Rods (inner and outer tie rod ends)
How to replace inner and outer tie rods, How to replace tie rod ends, How to replace tie rods. This video will show you in depth how to change the inner and outer tie rods of your car or truck. You need a special tool, an inner tie rod end tool, to complete the job (this can be rented for free at your local parts store). The job straight forward and anyone with basic tools can do it! **If the video helped, please give it a "thumbs up" and consider subscribing. Leave any questions or comments below and I will answer them as well.** My Facebook: https://www.facebook.com/chrisfix8 My Twitter: https://twitter.com/ChrisFix6 How to replace Drum Brakes: https://www.youtube.com/watch?v=3FYRwfKNHxw How to replace Differential Fluid: https://www.youtube.com/watch?v=KmqMUJb-E4M How to fix a Squeaky Belt: https://www.youtube.com/watch?v=UF3W-vHPYHg How to replace a Wheel Bearing: https://www.youtube.com/watch?v=BPs-QALECqs Replacing a Rack & Pinion Type Inner Tie Rod DIY, How to change a tie rod on your vehicle, tie rod replacement, tie rod end replacement, tie rod end check, tie rod noise, tie rod end removal, tie rod end, tie rod removal, tie rod adjustment, tie rod, fix tie rod, tie rods, tie rod ends, inner tie rod, outer tie rod, tierod, toyota camry alignment, tj death wobble, yukun tie rod, u-joint replacement, ball joint separator, bellows boot, steering rack boot, camry tie rod, k30 tie rod, steering parts, alignment wheel, wheel alignment, satrun tie rod, saturn tie rod, tierod adjustment, tie rod adjustment, tie-rod, separate tie rod, tie rod separator, tie rod adjuster, Disclaimer: Due to factors beyond the control of ChrisFix, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ChrisFix recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ChrisFix.





How manual transmission works





How a Differential Works and Types of Differentials
www.curvedspacecreative.com Video I created for Toyota in 2007. This was produced on a budget but its purpose is to explain the concepts and not be a Pixar-budget film. See other videos at: http://www.youtube.com/watch?v=zA_19bHxEYg http://www.youtube.com/watch?v=UpP6WYKrtS4 http://www.youtube.com/watch?v=MMrBDdLGB20 http://www.youtube.com/watch?v=hwwXukJaTlM See our iPad application at: https://itunes.apple.com/us/app/2013-lexus-es/id545743510?mt=8





Torque Converters Explained -EricTheCarGuy
Visit me at: http://www.ericthecarguy.com/ In this video I cover the purpose and operation of the turbine, stator, impeller, and torque converter clutch. I hope the explanation and practical give you some insight into how these parts work to not only transfer power from the engine to the transmission, but also how it drives the transmission pump and doubles the torque output of the engine when you take off from a dead stop. I've wanted to make this video for some time. In fact I've had the fans sitting in the back of the shop for almost a year. Now that I have the Automatic Transmission Dissection video under my belt I thought I would add a torque converter dissection into the mix. I hope you enjoy this video and that it gets you a better understanding of torque converter operation. Especially since I killed my air compressor cutting this one in half. Link to compressor repair video: https://www.youtube.com/watch?v=7Zz9SKSHxFg Yes this is indeed 'take 2' of this video. I changed a few things to make the information more accurate. I am going to be posting the old video for Premium Members at EricTheCarGuy.com just for fun. Here's a link to more information about becoming a Premium Member. https://www.ericthecarguy.com/premium-content-streaming-etcg-content Other useful links Automatic Transmission Dissection (Part 1): http://www.youtube.com/watch?v=JGbsgpp2YJQ&feature=youtu.be Automatic Transmission Dissection (Part 2): https://www.youtube.com/watch?v=0Qf6O0oAs7U&feature=youtu.be Discussion about this video: https://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/43707 -torque-converters-explained Why I Pulled the first video: http://www.youtube.com/watch?v=Oi5ujV1bjL8&feature=youtu.be Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





How Car Exhaust System Works
Watch the animated video showing the working of an Exhaust system inside a car. Don't forget to share if you like it.





Manual transmission(working)





How Car Cooling System Works
Watch the animated video on how the engine cooling system in an automobile works.





How manual transmission works (Revised). Part-2
Explanation of gears shift on a manual transmission.





How Car Transmission System Works
Know how the transmission system inside an automobile works. Do not forget to hit like if you found this video useful. Please Note: The differential gear system was mistakenly animated, and the actual rotation of the pinion and the ring gear is opposite to what is shown here.





Como funcionan los embragues
Funcionamiento de los embragues en un vehículo





How Ignition System Works
Know the basic working of an automobile ignition system working on battery.





How A Clutch Works (Motorbike)
Ali wants to be a racing driver and doesn't know how a clutch works.




Which car is faster? Which Car is Faster?





Similar 1/4 mile timeslips to browse:

1991 Dodge Daytona : 8.180 @ 165.000
Jim Clarke, Engine: 572, Supercharger: - Turbos: - Tires: Hoosier 16 x 33 x 15


1986 Dodge Daytona Super Pro: 8.420 @ 159.860
Mike Halverson, Engine: 540 dodge, Turbos: n/a Tires: goodyear 14.5-32


1986 Dodge Daytona : 9.200 @ 147.460
glenn leber, Engine: 440, Tires: 28.5 x13.5 et streets


1984 Porsche 944 Electric: 9.952 @ 130.900
Lowell Simmons, Engine: 2- 11, Tires: 275/60/15 Mickey Thompson ET Streets


1984 Dodge Daytona : 10.330 @ 127.840
Glenn Smith, Engine: 2.2 turbo, Turbos: super 60 Tires: 33 by 16 Hoosier


1987 Porsche 944 turbo: 11.437 @ 125.090
Sid McMullen, Engine: 2.8, Turbos: holset hx 40super Tires: BFG drag radials


1991 Porsche 944 Turbo: 11.742 @ 126.000
Frank, Engine: Porsche, Turbos: K26-8 Hybrid Tires: 10x16 Avon


1986 Porsche 944 Turbo: 11.987 @ 122.680
Bruce, Engine: 2.5 Liter, Turbos: Turbonetics 60-1 Tires: Nitto NT555R


1990 Porsche 944 Turbo: 12.139 @ 116.790
Frank, Engine: 2,5 Liter, Turbos: K26/8 Hybrid Tires: 10x16


1988 BMW 535i : 12.378 @ 114.870
TCD, Engine: 3.4L, Turbos: T04E-60 Tires: 26x10.5x16 MT ET Drags


2008 BMW 535i : 12.407 @ 114.890
Boosetd5, Engine: Procede REV 3,


1986 Porsche 944 TurboCup: 12.500 @ 117.000
Peter, Engine: 2500cc Turbo, Turbos: K27/8 Tires: Yokoham 048R


1993 Dodge Daytona IROC R/T: 12.595 @ 112.595
mike, Engine: 2.2 lotus head, Supercharger: no Turbos: enforcer 2 Tires: 23X7.5X15


1986 Porsche 944 turbo: 12.670 @ 111.650
tms951, Engine: 2.8 stroker, Turbos: 60-1 hifi Tires: 275/40/17 Bridgestone RE750


2008 BMW 535i e60: 12.723 @ 108.690
richard delisser,


2008 BMW 535i Cobb stg 2+, DPs, FMIC: 12.730 @ 109.270
Xclone, Engine: N54, Turbos: stock


1993 Dodge Daytona IROC R/T: 12.782 @ 109.680
Mike, Engine: 2.2 lotus, Turbos: enforcer 2 Tires: M&H 23x7x15


2008 BMW 535i : 12.884 @ 107.150
richard delisser, Engine: n54, Turbos: twin Tires: g-forces drag radial


1985 BMW 535i : 12.890 @ 113.000
Todd, Engine: 3.4L, Turbos: T61


1987 Dodge Daytona Shelby Z: 12.900 @ 106.530
Paul Velliky, Engine: 2.2, Turbos: T-3/T-4 hybrid Tires: M/T 22-8-15


 


©2014 DragTimes - Disclaimer