Instructions on how to remove your original emblems and install the 3.0 K logo emblems from Cooltrade
For Forte Sedan:
For Forte Koup:
Filmed & Edited by Kam Chan Kang
PlastiDip a WHOLE CAR - How-to by DipYourCar.com
DipYourCar Pro Car Kits sold here:
For High Res Pics of finished product visit www.dipyourcar.com
Fonzie from DYC shows you how to plasti dip your entire car. Step by step
instructions using the DYC.com Pro Car Kit. Smooth finish, easy masking,
all help included. Matte black audi s4 with glossifier on the wheels
PlastiDIp is 100% removable, long lasting, and has zero affect on the car's
OEM paint and clear coat.
DIY: Wrapping Rims in Matte Black Vinyl
I wanted to try a new style for my winter rims, and instead of pinting them
i wrapped them in vinyl, Costs about $10 a rim.
http://www.ebay.ca/itm/321097538225 This short video shows you how to wrap
a rim quickly(sped up 3x), There really is no downfall to doing this, faster and cheaper then painting, the
vinyl only weighs .4 ounces or about 50 grams. and thats spread out
throughout the rim and if you dont like it then just peal it off. If you
want more info or you want to buy some vinyl contact me at
email@example.com Or come contact me at 8thcivic.com please don't send a
message though youtube, I don't come here often.
Check it out on ebay for the full written DIY.
Or visit my ebay page at
and scroll down to Matte Black Vinyl Rim Wrap 6x 24"x24"
Also the first song uses is a
-rusko remix its rusko hold on sub focus remix, the second song is
-supersonic the world of discotronic and the last song is the classic
-chemical brothers hay boy hay girl with a dunstep remix.
Birth of a Kia Optima
The Birth of the Kia Optima, the new face of Kia. Watch this Discovery
Channel special covering the design, testing and production phases of the
the new car with highlights from the Kinetic Motorsports Pirelli World
How to install Honda Emblem Dual LED (Dual tone white and red)
this is a Dual color (Red+white) LED Honda emblem light for both running
and break lights for my 1994 Honda Civic EG8 model..
unfortunately, the seller did not have the LED lamp for Honda Civic 92-95
(1992-1995) emblem size.. so i had to buy the Emblem LED lamp size of Honda
Accord 2006 and buy the Honda Accord 2006 Emblem..
Warning: i used the Thinner as the last resort at this hour of the
midnight.. you may say i didn't fully think this through.. the Thinner can
eat through plastics and rubber, not to mention the paint and the wax of
[update October 9, 2013] at the moment only this fella on eBay who sells
two tone Honda LED lamp..
Disclaimer: you need some expertise to install things on your own.. and if
any doubts, DO NOT attempt this on your own, just seek help at the nearest
Car Workshop and no one would think any less of you..
Install Door Welcome Logo Lights
Installing door welcome logo lights in a 1999 Toyota Solara.
Procedure is the same for any car, remove the door panel, drill a hole on
the bottom and install the light, and wire up the light to the dome light.
The dome light wiring was already installed from the LED foot-well
lighting, so that was used as the power source. They light up only when the
doors are open or dome light is on.
These are 5W 4th generation laser projector lights with a Toyota logo from
Rebadging my Genesis Coupe (Custom Wing Emblem)
Decided to rebadge my Genesis Coupe. This shows install of the front and
rear wing emblem... although my approach changed halfway through the start
of the front emblem.
This is my first attempt at trying to do any sort of car mod.. try your
best not to laugh. :)
I learned how to do this by watching Casey at
You can buy these from ImportShark
3.0 K logo emblem from Cooltrade.avi
Product introduction, and installation instruction on the 3.0 K logo emblem
For Forte Sedan:
For Forte Koup:
Filmed, edited, and produced by Kam Chan Kang
Blacked Out Emblems with Plasti Dip
This product is awesome. It's not permanent, so you can mess up as much as
you want. It's easy to apply. It's easy to remove. Try it on anything, if
you don't like it just peel it off.
I blacked out my emblems on my Nissan 370z. It looks really good if you
want the "blacked out" look.
Keep in mind that I was filming this with one hand and using my other hand
to peel off the Plasti Dip, so I apologize for all the grunting and stuff.
Common Answer #1: You will need approximately 3 cans to spray all four
wheels using 4 coats on each wheel.
Common Answer #2: You can buy Plasti Dip at Home Depot, Lowes, and OSH.
Common Answer #3: Yes, it's safe to drive through the car wash and pressure
wash over the Plasti Dip, but I wouldn't recommend it.
Common Answer #4: It's not necessary to spray the inner wheel wells. I just
sprayed the face of the wheel.
Common Answer #5: The newspaper masking was to prevent over spray and makes
cleaning up easier and quicker.
Lastly, I made this video to show the car enthusiast community, who are
interested in blacking out their emblems, a much easier way to do so
without removing the emblem and painting it or buying a whole new black
Plasti Dip can result in different textures depending on the outside
temperature and how close/far you spray. Try it and see what works best for
your specific application.
Watch in 1080p for best viewing pleasure.
2014 Chevrolet Impala vs 2014 Kia Cadenza Review and Road Test
In this video we take a look at the new Impala and the new Cadenza back to
back. Which one is right for you? Watch and find out. For the full review
on each car, click over to:
2014 Impala: http://www.youtube.com/watch?v=X2SBvbppJDs
2014 Cadenza: http://www.youtube.com/watch?v=xv9ecgDtonU
2015 Hyundai Genesis HCD-14 Concept Engine Sound & Driving on the Road! Exclusive First Look!
2014 Hyundai Genesis HCD-14 Concept Engine Sound & Driving on the Road! I
was able to capture the first sound of the Genesis start up and some
driving scene. If you notice, the car stalled a few times and couldn't turn
while on the road. I believe this is the first video online of the car
Please visit my Facebook page for daily updates!
Flickr High Rez Photos: http://www.flickr.com/photos/alantphotography/
My Blog: http://atworldchannel.blogspot.com/
Follow me on Twitter for daily updates: