Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

Spray Gun Adjustments

Four important adjustments on your spray gun that need to be right before beginning to spray.


 


More Videos...


Spraying a Test Panel Part 1
Here is the final pain job after the test panel was complete. https://www.youtube.com/watch?v=nka2GdZLDCk Oh yea... I need more practice! Run in the sealer... base turned out good, striping in the candy, and runs in the clear... lol I see where I put the stripe in it. On the last pass of the first coat of candy, I didn't have enough overlap and I knew it, so I put another pass just above it, and it stayed in there on the second coat.





SATA_How_to_paint_correctly.wmv
How to paint a car correctly by Sata





Painting Basics & Techniques - Part 1 of 2 with Kevin Tetz - Eastwood
LINK TO BUY EVOLUTION PAINT GUN: http://www.eastwood.com/eastwood-evolution-paint-gun.html LINK TO BUY CONCOURS PAINT GUN: http://www.eastwood.com/ew-concours-gun-1-2-and-1-4-tips-plastic-andmetal-c up.html LINK TO BUY CLEANER & LUBRICATOR: http://www.eastwood.com/aerosol-injected-cleaner-lubricator.html LINK TO BUY BANDIT RESPIRATOR: http://www.eastwood.com/sas-bandit-respirator.html - HVLP Paint Gun - Eastwood Evolution - Item #12776 Evolution Advanced engineering in our Evolution™ HVLP Paint Gun is just 1 reason it's your next "must-have" spray gun...it's also lightweight, ergonomic, and sprays beautifully! The Eastwood-engineered Evolution™ HVLP Paint Gun is a uniquely versatile, gravity-feed paint gun that performs and feels like no other paint gun. Start with an air cap and nozzle designed to generate superior atomization, resulting in a finish you'd normally expect from more expensive, higher-end, professional guns. Paint longer with less fatigue! High-tech, ergonomic composite body is precision-balanced and lightweight Save set-up time! Indicators on the air/paint adjustment knobs let you revert back to your favorite settings Latest spray atomization technology and HVLP transfer efficiency Includes 1.4mm nozzle and needle (other sizes available) Built to last, even in professional environments Available in multiple configurations featured below. - Eastwood Concours HVLP Paint Gun 1.2 and 1.4 tips - Item #51603 Concours Paint Gun with 2 tips sprays-on a "show-car" finish...yet it's powered by your home compressor with only 4 cfm @ 29 psi! Why buy an expensive pro paint gun when Eastwood's full-size HVLP Concours Paint Gun has the same impressive features and 2 tips, at a fraction of the cost? And your home compressor provides all the air power you'll need (4 cfm @ 29 psi) to work with this Concours paint gun. Includes 2 stainless steel needle/nozzle/air caps (1.2 and 1.4mm) Anodized adjustment knobs and air cap ring Lightweight, satin-finished aluminum body Compatible with most home-shop compressors Backed by Eastwood's 10-year limited warranty - Eastwood Aerosol-Injected Cleaner & Lubricator - Item #12846z Eastwood's award-winning Aerosol-Injected System directs a focused blast of cleaner or lubricant to penetrate deep into hard-to-reach places Our Aerosol-Injected Clean/Lube System was the 2011 Winner of Popular Mechanic's™ Magazine Editor's Choice Award for Product Innovation and Design! One of the key reasons was the engineered taper of each can's nozzle that creates a tight seal to force the cleaner or lubricant deep into the tool or tubing, without blowback. Choose below from the Cleaner or the Lubricator...or both! 360-degree valves even spray upside down! Ideal for cleaning or lubricating anything around the car, shop and home Buy both and SAVE over individual prices! - SAS Bandit Respirator - Item #11455 The Bandit dual-cartridge respirator is ideal for painting, rust proofing, air-brushing and general maintenance projects. It is NIOSH N95 and OSHA approved and can be used in a professional environment such as a body shop. The half-mask is constructed of soft thermoplastic polymer for maximum comfort and a tight facial seal. The head strap is easily adjustable and ensures a secure snug fit around the top and bottom of your head. The filters are positioned for optimum vision and balance and have a life span of about 50 hours (conditions breathing rate and usage will affect filter life). Eastwood Company Ustream account for live automotive tech videos, car show streaming, and live product launches. Send us a suggestion for anything you'd like to see! Since 1978, Eastwood has been supplying products to people who want to do the job right. Eastwood offers a complete line of hand tools, welders, plasma cutters & accessories, metal working tools, powder coating supplies, paint and paint guns, specialty paints and hard to find products - all for the DIY-er. Eastwood has all the tools and supplies you need to restore your car, motorcycle or truck. Visit eastwood.com today.





How to Set Air Pressure / Air Volume for a HVLP or RP Spray Gun with SATA
Are you failing in the paint booth before you even pull the trigger? What are the air volume needs for a HVLP or RP spray gun? The volume of air you send a gun could have more then anything to with material usage and application issues then any other issue in Collision Repair. Learn from SATA DanAm Marketing Director Tony Larimer as he discusses everything from choosing the right fitting to selecting the right pressure at the wall. Before you even pull the trigger, the right volume of air will make your refinish flawless and easy. www.CollisionHub.com





(HVLP) High Volume/Low Pressure Spray Gun Settings And Spray Techniques
My Friend Pete way. http://www.swrnc.com or 972-420-1293





How To Paint & Set Up Your Spray Gun - Great Tips with Kevin Tetz at Eastwood Part 2 of 2
BUY Paintucation DVDs Here: http://www.eastwood.com/paintucation-5-dvd-series.html BUY Concours Paint Gun: http://www.eastwood.com/ew-concours-paint-gun-w-1-2-tip.html Part 2 of 2. Kevin Tetz visited Eastwood in September 2013 and gave this great demonstration on paint gun set up and techniques. In this video he explains how to set up a paint gun, including adjusting the fluid and air control. Kevin also discusses cfm and psi, what they mean and how to run an air line from a compressor to the gun. He explains the best path to paint around a car to get the best appearance and coverage. Kevin also shows how to hold the gun and make adjustments to get the best pattern. Eastwood has everything you need to do the job right - welders, plasma cutters, HVLP Guns and paint supplies, metal fab tools, rust solutions, body filler, powder coating supplies, hand tools and more. Since 1978.





House Of Kolor - How To Paint A Car - John Kosmoski
These are clips from the full DVD of Kustom Painting Made Easy - By John Kosmoski of House of Kolor. The dvd is great and there is a ton of information in it. I have the full 1hour and a half dvd. Email me. 09-01-2014 abel_m_95076@yahoo.com





Spray Gun Cleaning Part 1
Details on cleaning a gravity feed spray gun from Autobodybasics.com





Spray Painting - How to Set Up Your HVLP Paint Gun with Kevin Tetz at Eastwood
BUY Concours Gun Here: http://www.eastwood.com/ew-concours-paint-gun-w-1-2-tip.html BUY Paintucation DVDs Here: http://www.eastwood.com/paintucation-5-dvd-series.html BUY Aerosol Injected Cleaner: http://www.eastwood.com/aerosol-injected-cleaner-lubricator.html In this video. Kevin Tetz (Trucks!, Paintucation) shows you the proper way to set up your HVLP Paint Gun. Using an Eastwood Concours Paint Gun, he shows you how to set up the proper spray and fan pattern, what the knobs are for on the gun, and how to clean the gun prior to painting. Kevin Tetz's stunning 1966 "Jaded" Mustang debuted at SEMA 2012 and featured Eastwood products from bare metal to clear coat. Eastwood has everything you need to do the job right - welders, plasma cutters, paint and guns, powder coating supplies, soda and abrasive media, rust solutions, metal fab tools, hand tools and more. Since 1978. Are you an Eastwood Guy? Concours HVLP Spray Gun with 1.2mm tip sprays-on a "show-car" finish...yet it's powered by your home compressor with only 4 cfm @ 29 psi! No need to buy an expensive pro paint gun when Eastwood's full-size HVLP Concours Spray Gun has the same impressive features at a fraction of the cost. And your home compressor provides all the air power you'll need (4 cfm @ 29 psi) to work with it. Includes 1 stainless steel needle/nozzle/air cap (1.2mm) Compatible with solvent and waterborne coatings Anodized adjustment knobs and air cap ring





How to Custom Paint a Car
See more pictures of this job on our facebook page! - https://www.facebook.com/pages/RefinishNetwork/130126840847 This is the painting of a 1968 Camaro going Synergy Green. This car was stripped and restored, including panel replacements, some metal patches and dent repairs. Music used under the creative commons license - wellman - certain death but not today hansatom - inferno is a place on earth The products used on this vehicle were BASF Onyx HD Waterborne basecoat and Glasurit 923-200 Clearcoat. Picture or Car Completed: http://img707.imageshack.us/img707/2599/Camaro3s.jpg





How to Fix a Scratch and Paint with Base / Clear
http://www.refinishnetwork.com/car-painting-how-to Visit http://www.refinishnetwork.com for more videos, repair article, auto body repair courses and auto body repair information. Join other auto body technicians and discuss car painting techniques with auto body professionals and enthusiasts. This shows a minor scrape on a Mazda Miata. The scratch was feathered out, primed and painted using BASF paint. There are many ways to get the job done, this is what was done here: 1. The scratch was feathered out using 280 grit paper until each color was seperated around 1/2". 2. Next it was backsanded to allow space for the primer to adhere. 3. It was primed with 2 coats of Glasurit 285-10/20 direct to metal urethane primer and allowed to dry. It was primed with a devilbiss finishline HVLP gun with a 1.6 tip. 4. Next it was blocksanded using 320 paper, then final sanded with some 400-500 grit paper. Using a block is optional there but recommended. 5. After taping it up it was painted using RM Diamont basecoat in 3 coats. Each coat was allowed to flash about 5 minutes before the next one. Then 15 minutes before clearing. An Iwata LPH400 was used to apply the basecoat at about 20 psi. 6. The clear coat used here was BASF DC5335 Glamour clear. It was applied in 2 coats with about 10 minutes between coats. It was applied using an Iwata W400 with about 26 PSI at the gauge. A few dirt nibs were colorsanded and polished afterwards.





HD: How To Adjust Your Spray Gun - Auto Spray Gun Setup Tips!
HD: How To Adjust Your Spray Gun -- Auto Spray Gun Setup Tips Blog: http://www.learnautobodyandpaint.com/blog/hd-how-to-adjust-your-spray-gun-a uto-spray-gun-setup-tips/ Get a FREE 90 min auto body DVD here: http://www.learnautobodyandpaint.com/freeautobodydvd/ Check out the store: http://www.learnautobodyandpaint.com/store Adjusting your paint gun is pretty simple. Most newbies think it's a complicated process when it's really not. Here is a short video that basically tells you what you need to do. If you want to see how it's done, we also have more videos within the VIP area that show you the step-by-step process on all areas of body work, prep, painting, painting from your home garage, installing body kits and also auto customization. I hope this video clears up your confusion about some of the steps on spray gun adjustments and how to clean your spray gun. Remember that it's VERY critical that you clean your spray gun after each use. If you take care of your gun it will take care of you. Like my dad says... you can have a cheap gun, but if you keep it clean, it will continue to spray nice. See What Our VIP Training & Community Can Do For You: http://vip-offer.learnautobodyandpaint.com/ Get A Free 90-Min. DVD, 85-Page Auto Body & Paint Manual + 7-Day Video Boot-Camp Access Here: http://www.learnautobodyandpaint.com/ Connect on Facebook for More FREE Updates: https://www.facebook.com/learnautobodyandpaint Connect on Google Plus: https://plus.google.com/+HowToPaintYourCar/posts Check Out Our Recommended Gear: https://www.learnautobodyandpaint.com/store/





Remove Rust from Metal and Panels the Easy Way: Video 1
"The easy and safe way to remove rust at home". I am amazed at how many people have not heard of this method before. Some old school tips are more useful today, it saved them money and it will save you time and money too.





SATA - Painting with HVLP technology
The movie explains the differences between conventional and HVLP guns.





How To Paint A Car
How To Blend Paint Paint Jobs On Car! Blog: http://www.learnautobodyandpaint.com/blog/how-to-blend-paint-paint-jobs-on- car/ Get a FREE 90 min auto body DVD here: http://www.learnautobodyandpaint.com/freeautobodydvd/ Just Follow the proven & easy step-by-step course that will take you by the hand and guide you through a successful auto body and paint job for your special project. See What Our VIP Training & Community Can Do For You: http://vip-offer.learnautobodyandpaint.com/ Get A Free 90-Min. DVD, 85-Page Auto Body & Paint Manual + 7-Day Video Boot-Camp Access Here: http://www.learnautobodyandpaint.com/ Connect on Facebook for More FREE Updates: https://www.facebook.com/learnautobodyandpaint Connect on Google Plus: https://plus.google.com/+HowToPaintYourCar/posts Check Out Our Recommended Gear: https://www.learnautobodyandpaint.com/store/





Which car is faster? Which Car is Faster?




Similar 1/4 mile timeslips to browse:

1991 Ford Probe LS: 8.110 @ 166.000
Fred House, Engine: 2.3, Turbos: JS Single 76mm


1990 Ford Probe GT Turbo: 8.180 @ 169.000
Matt Faul, Engine: Toyota 2jzge Long block, Turbos: Borg Warner S480 Tires: 33x10.5W Rear M/T, 24x3.5 M/T Front


1996 Ford Probe GT Turbo: 8.746 @ 161.333
Lyle Poxx, Engine: Eslinger 2.3L Ford Block bored 0.080 over, Turbos: Presicion Single 80mm Tires: Goodyear slick 31x14.5


1993 Ford Probe GT: 10.717 @ 133.822
Dan Ciobanu, Engine: 2.5L V6, 24-valve DOHC, Supercharger: none Turbos: Garrett T04 60-1 stage3 Tires: Hoosier 26x9x15


1966 Chevrolet Biscayne : 11.326 @ 117.920
Rich 'Ratty' Katz, Engine: 406 Dart Little M, Tires: M/T ET Street Rad 30x11-15, M/T Sportsman 26X5-15


2012 Lexus LFA : 11.810 @ 123.710
NA, Engine: 4.8L V10: 552HP,


1996 Ford Probe GT T3T4 Turbo: 12.643 @ 116.260
Sean, Engine: KLDE, Turbos: T3T4 Tires: Yokohamas avs es100


1997 Ford Probe GT: 12.965 @ 108.270
Dan Floto Jr, Engine: KL-03 2.5 V-6, Tires: Nitto 555r's


1990 Ford Probe GT: 13.230 @ 113.810
Nick Sgambelluri, Engine: Mazda FE-DOHC, Turbos: GT35r Tires: BFG G-Force t/a KDW II


1989 Ford Probe GT Turbo: 13.400 @ 113.600
Jerry Chase, Engine: 2.2 liter 12 valve SOHC, Turbos: T3 upgrade Tires: Kumho 711s


1993 Ford Probe GT: 13.550 @ 103.000
MikeB, Engine: KL-03 2.5L V6, Tires: nitto 555R


1968 Chevrolet Biscayne : 13.560 @ 103.270
BOB TANGEN, Engine: 427CI 425HP, Tires: IMCA G70 15


1991 Ford Probe GT Turbo: 13.624 @ 109.341
phillip, Turbos: t3/t4e 50t


2004 BMW 330i : 13.630 @ 99.640
vic, Engine: M54 NA, Tires: toyo proxes 235/40r17


2010 Toyota RAV4 V6 Sport AWD : 13.717 @ 99.570
KevinThomas,


1963 Chevrolet Biscayne : 13.720 @ 98.970
ken barton, Engine: 350,


2002 BMW 330i Active Autowerke: 13.900 @ 102.000
CD,


1995 Ford Probe ZE: 13.950 @ 98.000
Michael Lyons, Engine: KLZE, Supercharger: NA Turbos: NA Tires: BF Goodwrench GForce TA's


1997 Ford Probe GT: 14.099 @ 97.690
Dan Floto Jr, Engine: KL-ZE JDM 2.5 Dohc V-6, Supercharger: N/A Turbos: N/A Tires: Nitto 555r's


2004 BMW 330i ZHP with Dinan Intake: 14.150 @ 101.500
Alex M.,


 


©2014 DragTimes - Disclaimer