1986 Chevrolet Monte Carlo SS All Street Project Car
This is my 1986 Chevrolet Monte Carlo SS. I have owned this car for 13
years and it has been in the family for over 26 years. The car has just
under 29,000 original miles. The engine and drivetrain is all original as
well as the paint and interior. I didn't drive the car much, so I decided
to make a few subtle changes, mostly in the stance, so I would drive it
more. Just don't care for the stock stance on these cars. For the front I
used 2" drop Belltech spindles and 1" drop Belltech springs. For the rear I
used OPG 3" drop rear springs. 3" total drop front and rear. I used
Belltech Street Performance shocks on all four corners. The wheels are
Center Line Retros 18 x7 front, 18 x 8 rear. Nitto NT555 tires 225/45 in
the front, 255/45 in the rear. Also for a little more sound, I went with
Flowmaster Super 40 mufflers and custom tailpipes. I drive the car a lot
now just cause I enjoy it so much more. I didn't cut anything and I have
everything to put the car back original if I ever decide to in the future.
Thanks for looking!
7-19-13 8.8 ford rear install in the malibu wagon
today we threw the 8.8 rear into the malibu, literally threw it in it was
ebay control arms
1981 Chevrolet Monte Carlo Engine swap. (Next part is random videos on my channel)
(Next part is random videos on my channel)
First official video of my Chevy Monte Carlo 1981 rebuilt project. Engine
swap from 267 c.i. to a 350 c.i. , cooling system, firing system, air
Premier film officiel sur mon projet de reconstruction de mon Chevy Monte
Carlo 1981. Engine swap de 267 c.i. à 350 c.i. , dépose du cooling
system, firing system, air intake...
Chevrolet Big Block chevy 396 breakin
Big Block Chevy 396 .60 over 9.7:1 breakin
Just got the engine put together tote cost was around 3.5K in parts &
The cable to the starter was Way to long when trying to start it so after
shorting the cables it fired right up.
396 Bord .060 + 408 line holed and decked .010
119CC heads ovel port Milled .005 6272292 Passenger heads compression 9.7:1
Nodular Iron Crankshaft "Balanced"
Eagle "SIR" 5140 Forged I-Beam Rods W 7/16 ARP bolts
Speed-Pro Power Forged Pistons P/N:TRW-L2328F30 9.7:1
Speed-Pro Plasma-moly piston rings
Elgin 3/8 Push Rods
Elgin 21-4N Stainless Valves Intake 2.065 & Exhaust 1.75 vavles
CraneCams 103052 Energizer Cam @ IN216 - EX216 lift .510
CraneCams 13308-1 Valve Springs
Professional Products Damper
Scat SFI Flexplate "was bent" GRRRR
Melling High Volume Oil Pump
CraneCams 13744-16 Energizer Roller rockers
Pioneer rocker studs
Edelbrock Performer EDL-2161 Aluminium Intake
Comp Cams Timing Gear Drive Sets "in the trash"
ARP Main bolts & Head Bolts
2000 Chevrolet Monte Carlo SS Start Up, Engine, and In Depth Tour
In this video I give a full in depth tour of a 2000 Chevrolet Monte Carlo
SS. I take viewers on a close look through the interior and exterior of
this car while showing details, over viewing of features, and noting unique
styling cues to the vehicle itself. I also show the engine and the details
of it, start it up and see how it sounds under acceleration. A thorough
tour/review of this car designed to give others a greater overall
appreciation of the vehicle.
1985 chevy monte carlo big block
Just some pics of my build up on my ss. car is being redone from top to
bottom. 454 .30 over 460 cu in ford 9 inch rear end. mild street motor.
8.8:1 this will be a street car not a track car. part one more to come when
the car goes to paint.......