0-60 and top speed cummins 12v
People seem to be wondering where my gauges are and how fast they go up so
here you go. 1997 2500 cummins 12v #100 plate full forward, no AFC,16*
timing, 5" with see through muffler.
Cummins-Tuner.COM Turbo Shootout - Episode One
Cummins-Tuner.COM launches its turbo
Shootout tonight - Episode One of an eleven part series about five
aftermarket turbochargers to replace the
stock charger on the Cummins 5.9L. Tonight CT's Nick Priegnitz explains how
the turbo shootout is designed for
anyone considering a turbocharger
Episode Two will be posted June 10th, here and on the Cummins-Tuner.COM
cummins burnout 450hp
cummuns turbodiesel sick burnout all the
way to the top of the hill.
could have went farther,but i ran out of road so i let off.
95' 3/4T ram
4" turbo-back str8 pipe.
no fuel plate
Boost turned up to 40 PSI
Dunrite triple-disk converter w/ lockup
more in progress
Cummins p7100 injection pump afc housing
The afc housing is already broken down. Here is where to grind the afc foot
for more afc travel. This translates into more rack travel and more full
throttle fueling. Also, the afc washer needed to be altered is shown.
Disassembly is the reverse of assembly. Sorry for the camera handling: just
an iPhone 3gs and no tripod.
12 valve Dodge Cummins 4000 rpm rev. and smoke
Just wanted to hear it after installing 3000gsk. 17 deg. of
timing.Performance valve adj. marine head gas.Already have done afc spring
custom ground fuel plate rotated plungers K&N bhaf Banks Big Head waste
gate set @ 40 psi. or so of Boost.Dimond Eye 4" turboExhaust
with muffler.Bllet torque converter and valve body.
24v Cummins Fuel Heater O-Ring Leak Fix on 99 Dodge Ram 2500 Truck 4x4
I had a fuel leak on my 1999 Dodge Ram 2500 from the wires in the top of
the fuel filter housing. These 2 wires power the fuel heater inside the
canister. I removed the canister & fuel filter, cut the wires, removed 3
torx screws, and pulled the heater element out. I found an o-ring that fit
the groove and reassembled with a new fuel filter and spliced the wires
back together. Fuel leak is now fixed.