Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

scoot sports RX7 topspeed ATTACK

1999


 


More Videos...


Veilside fortune Rx-7
engine mods to this car on my other vid music by Paul Oakenfold





RE Amemiya Super Greddy 7 RE20B RX-7 FD3S
This RE Amemiya Super Greddy 7 RE20B was built for the annual Tokyo Auto Salon. This exquisite machine is packed with RE Amemiya's tuning knowledge and is setup for the street. The intent of the vehicle is of course, running the Wangan highway. The machine was designed to easily reach high speeds and provide unmatched stability at 300km/h. This makes 300km/h seem like leisurely cruise. The three rotor 20B engine was removed from a Mazda Cosmo. It is fairly easy for RE Amemiya to build a 300km/h engine, and it can be done with a 13B. Then why choose a 20B? The 13B is notoriously known to have a short life span, especially after it has been modified. Also, it lacks the low end torque, and it does not hold the power to leisurely reach, and cruise at 300km/h like the 20B. Therefore, the 20B was chosen, and the low end torque demise was solved. But even though it's a rotary engine, doesn't mean that it is a easy swap. The weight distribution of the well balanced FD becomes thrown off. The 20B had to be offset 10cm to the rear and 6cm to the front in reference to the 13B. Also, the body, subframe, and the propeller shaft all need fabrication. The exterior was dressed up with the RE Amemiya 2006 model Aero kit. It consists of a Porsche 997 front headlights, and the rotary themed rear bumper. The sides consist of super wide fenders to accentuate the whole look. The vehicle was completed just in time for the first ever Pre Tokyo Auto Salon event held in the United States. The vehicle then will be shipped off in time for the real 2006 Tokyo Auto Salon event in Tokyo. ***http://www.Garage411.com/ - Repair guides for your Acura, Honda, BMW, and more!***





Nitrous LSx Mazda RX-7 vs E85 Big Turbo EVO on slicks!
EVO HAD CLUTCH ISSUES REMATCH COMING SOON!! OutOfOrder EVO vs DNR Performance LSx RX-7 Shoutout to 3HeadedElephantS for the GoPro Footage! Checkout his channel and subscribe, also watch his badass edit of this same race here: http://www.youtube.com/watch?v=JS4-nv-9Hvg





Mazda RX-7 Spitting Huge Flames from Exhaust!
When I was driving back from an event, this turbocharged Mazda RX-7 FD3S passed me in a tunnel. As you can see this tuned Mazda RX-7 FD3S was spitting some huge flames from the Exhaust! Hate it or love it, I really enjoyed it! :) Follow me: http://www.Gumbal.tv 1st Channel: http://www.YouTube.com/GUMBAL 2nd Channel: http://www.YouTube.com/GUMBALTV 3rd Channel: http://www.YouTube.com/CarChannelClassic FACEBOOK: http://www.fb.com/GUMBALTV INSTAGRAM: http://www.instagram.com/GUMBALTV TWITTER: http://Twitter.com/GUMBALTV GOOGLE+: https://plus.google.com/+Gumbal Thanks you for watching my videos. All feedback on my videos are appreciated! Don't forget to like the video and subscribe to my channel. More videos coming up! - Hans





SCOOT SPORTS 4rotor
2008/05/10 CENTRAL CIRCUIT RX-RACE / 7&8 MEETING SCOOT SPORTS 4rotor





Magic R26B 4ROTOR FD3S SHAKE DOWN!
長年にわたって兵庫県のマジックが製作を続けてきた4 ーターエンジン搭載車がついに完成。 シェイクダウンの様子はOPTION2 2011年8月号(7月11日発売)の特集に掲載されているが、ム ビーではシェイクダウン走行の様子や、4ローターNAエ ジンのサウンドをお届けしよう。 http://www.jdm-option.com/





Mazda Rx7 4-rotor race car. The making of a Defined Autoworks Beast. [Offical Video]
Never before seen footage showing the assembly/start-up of our custom 4-rotor. It is the first 4-rotor since the 787b to use triple spark plugs per rotor. It is also the first since the 787 to feature telescoping intake manifold. Custom made slide throttle body system. A world first however is the use of a center main bearing and 4-piece eccentric shaft. Quick specs- 9.7:1 rotors, lightened and race clearanced. Race main bearings, and race rotor bearings, ceramic NRS 2mm apex seals. Custom stationary gears, Full custom Peripheral Port in each rotor housing (defined auto), Aluminum side housings for reduced weight. Needle roller bearing in the center housing. 4- Piece eccentric shaft 0:47 Dynamic engine balancing 1:23 Variable length intake 2:20 Engine assembly 2:32 Rotor rotation 3:49 Slide throttle 4:00 4-rotor startup and idle 4:30 All footage and editing was done by Defined Autoworks. Music by Ivan Torrent. www.DefinedAutoworks.com Contact us at 614-592-7991 we build any type of rotary powerplant to the highest standards. See the build thread here- http://www.rx7club.com/build-threads-292/iv-rotor-build-12-plugs-9-bearings -8-ports-%3D-1-monster-1037657/





racing beat bonneville rx7
racing beat Rx-7 racing at Bonneville.





4 rotor RX-7 FD3S
SCOOT SPORTS 2003 前アカで上げてました





SCOOT NEW 4ROTOR ENGINE TEST RUN
OPTION2 2011年9月号では、8月号に続いて新たな4ローターエンジ をお届けするぞ。 今回新たに完成したのは神奈川県のチューニングショッ プ スクートスポーツが製作した13Bをベースとしたサー ドポート仕様のエンジン。 エンジンやマシンの詳細についてはOPTION2 2011年9月号(8月11日発売)をチェックしてほしい。 http://www.jdm-option.com/





Mazda charge 767B tested by tsuchiya
An OLDTIME MONSTER , the Charge Mazda 767B with 4 rotors engine (13 J ) , 630 hp @ 9000rpm with one meter high , weight 800kg ... just listen. ps: the car is driven on a tight and curvy / bumpy racetrack , not the best for a real racing car.





7sDay - Sound of Rotor
7's Day 2011 - 7/7/2011 Rx-7 Enthusiasts meeting at Tsukuba TC2000 Mazda Rotary Festa with RE-Amemiya and RE-Xtreme





3 Car Pile Up - Episode 8 - Hill Climb
These drivers strap themselves into some insanely powerful machines and make a mad dash for the top of the hill, but not all of them make it.





RE AMEMIYA SUPER GT RX-7 rx7 DRIVING EXPERIENCE
RE AMEMIYA RX-7 rx7 Driving Experience ... Can the D1 driver handle a GT car? especially on very cold tires ...





400 Horsepower RX-7 in Tokyo
Met up with a guy who has a 400 hp RX-7 when it's running at low Boost. To ensure the longevity of the engine he's running his T04 turbo at about 12psin (very low Boost). It has 2 apex seals on a bridge port motor. He gave a demo on the freeway and showed what it can do.





Which car is faster? Which Car is Faster?




Similar 1/4 mile timeslips to browse:

2006 Ariel Atom 450 Custom Turbo: 10.425 @ 134.680
James Buckley, Engine: Turbocharged K20, Turbos: CPL worked Garrett Tires: M+H wrinkle wall slicks with inner tubes


2006 Ariel Atom 300: 10.866 @ 123.990
Andrew, Engine: Honda K20, Tires: Yokohama A048s


2009 Ariel Atom 3: 11.210 @ 125.220
NA, Engine: Inline 4, Supercharged, 300HP,


2007 Ariel Atom 300: 11.500 @ 115.510
Darren Atack, Engine: Supercharged Honda K20a, Supercharger: Jackson Racing Tires: Yokohama R888


2007 Ariel Atom 2: 11.510 @ 117.020
NA,


2006 Ariel Atom 300: 11.510 @ 115.510
dazzassti,


1972 Dodge Ram Van Tradesman 100: 11.949 @ 113.330
Aliksander Osheim, Engine: 360 small block mopar, .030 over, Supercharger: N/A Turbos: N/A Tires: Mickey Thompson Street Radials, Hoosier Slicks


2006 Ariel Atom 2: 12.200 @ 111.700
CJ, Engine: 220hp ecotec, Tires: ES100's


2007 Ariel Atom 2: 12.230 @ 119.670
CJ, Engine: Brammo 230 (GM Stage 1), Supercharger: Eaton M62


2007 Ariel Atom 2: 12.502 @ 111.750
Gage, Engine: 205hp Ecotec, Tires: Yokohama AVS-ES100 225-45-VR16


1981 Alfa Romeo GTV-6 3.2 V6 24V: 13.173 @ 103.490
fastcar, Engine: 3.2 V6 24V, Tires: Toyo R888 225/45 R16


1997 Mercedes-Benz E50 AMG : 13.260 @ 105.549
Mark Grant, Engine: 5.0L, Supercharger: No Turbos: No Tires: 265x 35 Pirelli


1981 Alfa Romeo GTV-6 3.2 24V: 13.404 @ 104.530
fastcar, Engine: 3.2 V6 24V from 147GTA,


2006 Infiniti M45 Sport: 13.534 @ 103.000
Aaron, Engine: 4.5L, Tires: Toyo


1981 Alfa Romeo GTV-6 3.2 V6: 13.577 @ 105.140
fastcar, Engine: 3.2 V6 24V GTA, Tires: Yokohama Advan A038


1997 Mercedes-Benz E50 AMG : 13.636 @ 105.200
ANDYE50AMG, Engine: AMG, Tires: Dunlop Direzza DZ101


1981 Alfa Romeo GTV-6 3.2 24V: 13.789 @ 101.050
fastcar, Engine: 3.2 V6 24V,


2006 Infiniti M45 Sport: 13.801 @ 101.420
NA,


1981 Alfa Romeo GTV-6 3.2 24V: 13.914 @ 99.110
fastcar, Engine: 3.2 V6 24V from 147GTA, Tires: Yokohama A520 205/45R16, 225/45R16


2006 Infiniti M45 : 14.110 @ 98.810
NA, Tires: Bridgestone Potenza RE050A


 


©2014 DragTimes - Disclaimer