Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

StarCity Racing - JesterMX6 vs Thunder

turbo MX6 vs LS1 Camaro


 


More Videos...


2014 Mazda Mazda3 5 Door Hatchback Review and Road Test
The mainstream compact car segment is the perfect example of the infamous "driving appliance." The Corolla and Civic sell in enormous volume because they are the middle-of-the-road "white bread" option, not in-spite of the vanilla. Unlike many in the automotive press, I don't find anything wrong with that. In fact, I love me some Wonder Bread. But sometimes you feel like a pumpernickel, and that's where the 2014 Mazda3 comes in. Accounting for 30% of Mazda's worldwide volume, calling the Mazda3 their most important product would be putting things lightly. As a result 2014 brings a complete overhaul to every aspect of the 3 and the compact sedan now rides on a platform derived from the larger 6. The "Kodo" design language of the larger sedan has also been brought down to its smaller stablemate to astonishing effect. While the old Mazda3 was all smiles and bubbles, the new 3 is all grown up and aggressive with Mazda's incredibly attractive grille. Before the 3′s release I was quite torn about who was the fairest of them all but now there is no contest. The 2014 dimensions play a huge role in the way the 3 looks on the road. Mazda moved the A-pillar 3.5 inches to the rear making the hood longer, lengthened the wheelbase by 2.5 inches, dropped the height by 6/10ths and made the whole car 1.6 inches wider. So far so good, but somehow Mazda managed to slash the front overhang and increase the wheel-to-front-door distance to an almost RWD like proportion. That would probably have been enough in a segment dominated by slab sides, but Mazda puts two distinctive character lines to separate the 3 from the pack. Out back we have tail lamps that mimic the front styling and your choice of a hatch or a trunk. Opting for the hatch gives the Mazda3 a side profile reminiscent of BMW's X1, not a bad thing to be reminded of. With pricing that ranges from $16,945 (sedan) to a hair under $30,000 (loaded hatch) if you check all the option boxes on a Mazda3 hatch, it's obvious the Mazda spans the price spectrum from white bread in a bag to a paper-wrapped organic artisan cheesy sourdough. Like the Ford Focus, this large price span means the $19,495 iSport and $20,645 iTouring compete with the bulk of Corolla/Civic shoppers while the upper level trims compete with the Ford Focus, Acura ILX, Lexus CT200h, Buick Verano, and the few that shopped Volvo's defunct C30. Compared to the Civic and Corolla, the Mazda3 delivers superior dynamics and more premium dash materials in exchange for less tech and no touchscreen infotainment. This is a dangerous trade in a segment known for placing features before fun. On the flip side, the Mazda3 has everything it needs to compete with the Focus, ILX, Verano and CT200h. Mazda's chassis tuning makes the Mazda the most fun to drive (even considering the ILX 2.4′s Civic Si roots), the infotainment system is entry-level luxury worthy and 2014 brings all full-speed range radar cruise control and ever gadget the Buick and Lexus shopper could want. So is the Mazda3 the perfect pumpernickel for Wonder Bread prices? As good as. Civirolla shoppers who can be convinced to cross-shop will be pleased with Mazda's sexy exterior, comfortable seats and road manners, but those after large seats and large trunks will return to the white bread alternative. I suspect the near luxury shoppers are the ones that will miss out the most however thinking that nothing this tasty could come in a package with a Mazda logo on it. Their loss. Music contained inside is licensed ubder Creative Commons http://incompetech.com/music/royalty-free/licenses/ Sweeter Vermouth Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/





323F KLZE Dyno after 5 years track use
What is still left in it after 5 years of track abuse in the 2.5 KLZE ? It started with 215bhp in 2008. Engine is still the same, no work on the engine itself, heads are not removed since. Just plain maintenance and proper warming up before flooring it. For the records; standard engine only with a cai, upgraded ht leads, thermalspacers and a Exhaust + ebay manifold. Stock 2.0KF ecu





The Basic Parts of an Automatic Transmission (Part 1)
Visit me at: http://www.ericthecarguy.com/ This is part one of my front wheel drive (FWD) automatic transmission dissection video. In this video I cover the operation of clutches, bands, accumulators, clutch drums, the oil pump, the valve body, valves, check balls, seals and 'o' rings, as well as the construction and function of many of the internal hard parts of an automatic transmission. To be honest a rear wheel drive transmission isn't much different as many of the basic components are the same. I guess what I'm saying is that you could use the information in this video to have a basic understanding of a rear wheel drive automatic transmission also. It is just a basic overview of the main components. I don't get into theory and operation so much. Just the general operation and identification of the parts. I may make more videos on this topic based on the comments I get so feel free to ask questions and perhaps I'll answer them in a future video on this topic. There will also be a separate video on the parts and operation of the torque converter as well. When that is posted I'll post links below to that video. Part 2: https://www.youtube.com/watch?v=0Qf6O0oAs7U Torque converter dissection: http://www.youtube.com/watch?v=_U_d_tBn-HQ Discussion about this video: https://www.ericthecarguy.com/kunena/18-The-EricTheCarGuy-Video-Forum/43585 -the-basic-parts-of-an-automatic-transmission#50371 Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.





How to adjust bands and change automatic transmission fluid
This is a demonstration of how I tightened the bands of my automatic transmission and changed the transmission fluid and filter. The vehicle is a 1998 Dodge Ram 1500 4X4 with a 46RE transmission. This repair was done after a transfer case repair which required removal of the propeller shafts. With the front shaft out of the way, access to the front band adjustment screw was better than normal. It is possible to do this with the shaft in place, but access for demonstration is not as good. For details of how the propeller shaft is removed, see my other videos on repairing a Dodge transfer case oil leak. Note that the details of how this is done, especially the torque settings and the number of rotations backward after ideal torque, are very specific to the 46RE transmission. Be sure the locknut is backed off enough that it doesn't bottom out when the adjustment screw is tightened. Before ever doing this type of procedure yourself, you should consult the dealers repair manual and verify the specific procedure in your car. This is an amateur demonstration done for entertainment purposes only. The information offered here is given in good faith but with no guarantees of accuracy or safety. Any misadventure you encounter if you decide to do maintenance on your own vehicle is your responsibility. Short clip of music midway through is royalty free music "The Messenger", from Youtube creation tools, author unknown. Thunderclap sound used under Creative Commons 3.0 license, done by RHumphries at http://freesound.org/people/RHumphries/





Mazda MX6 Foto 1993-1997
Mazda MX6 Slideshow





Zoom Zoom (W/ the MX-6)
Zooming around with a Mx-6.. slides, drifts, cornering, smoke and whatnot.





Mazda MX6 Ford Probe GT 2.5L V6 Automatic Transmission in car rebuild Fix Part 2 of 3
Like to fish visit http://www.tristatefishing.com Third and forth gear clutch pack replacement video for G4 two pan trans.





Mazda mx3 ITBs testing KLZE v6 thottle bodies
Having another go at running the ITBs. Balance is getting there. CarPC keeps crashing so I can't attempt to tune it yet :( They're triumph t595 throttle bodies customised to fit onto a KL flange. If you're wondering why the sound changes half way in, it's the electric Exhaust cut-out valve... I don't think the phone mic liked it much!





Mazda 3 2014 - Большой тест-драйв (видеоверсия) / Big Test Drive - Мазда 3 2014
Подкаст «Большой тест-драйв» - https://itun.es/ru/UdTgS.c Сайт: http://btdrive.ru/ | Twitter: http://twitter.com/bigtestdrive | G+: http://google.com/+stillavinpro | Instagram: http://instagram.com/bigtestdrive | Facebook: http://facebook.com/stillavinpro | Vkontakte: http://vk.com/stillavinpro | LJ: http://btdrive.lj.ru Mazda 3 изменилась. Из машины для девочки она превратилась в... Сергей Стиллавин и Рустам Вахидов постарались понять как теперь будет Mazda 3 2014 позиционироваться на рынке. Оригинальные задние фонари, изменения в интерьере и два минуса, с которыми нужно мириться в новом выпуске "Большого тест-драйва". Наша партнерская программа http://agg.quizgroup.com/join-now/





Mazda MX6 626 Ford Probe bad slipping Automatic Transmission Failure Fix Part 3 of 3
Mazda MX6 Ford Probe GT 2.5L V6 in car 3 4 Gear Replacement Transmission Fix Part 3 of 3 Third and forth gear clutch pack replacement video for G4 two pan trans.





Insane Exhaust Sound - Straight Pipe´s Probe GT
My Probe GT Straight Pipe´s Exhaust Mods : - Stainless Steel Racing Headers Wrapped in Exhaust Heat Wrap : - High Flow Cat Converter : - 4 Mufflers ( Bike Style ) Note : the smoke comming out from the Exhaust is condensation, when i shoot the video the temperature was - 14°C





reparación de cajas automáticas (desarmado de la transmisión automática) - parte 8
Yo solo subí los vídeos, no se del tema. Preguntencen entre ustedes.





Mx3 KLZE vs. Impreza GT turbo
Industrie terrein Veenendaal





Mazda 626 8000rpm Revving (KLDE / KLZE)
Replaced the engine in my car, this new engine sounds good even though it is only a klde! Edit 20/9/2013: Sold this car as it had a few unfortunate things happened to it... Brought another 626 with even better mechanicals! One day I'd really like to supercharge it for some experience before I upgrade to a new car.





Preparing the Mazda for Battle
The MX5 is tested, broken, tested and broken again... will it beat its arch rival the Honda S2000? Marty prepares his Mazda to find out... Check the first video of this series here: https://www.youtube.com/watch?v=Ru9p9hcRBP4 Get a CHOPPED Sticker (and other mad stuff) here! http://www.mightycarmods.com/collections/ Episode discussion on the mighty car mods forum here: http://forums.mightycarmods.com/showthread.php?34427-New-Episode-Preparing- the-MX5-for-Battle




Which car is faster? Which Car is Faster?





Similar 1/4 mile timeslips to browse:

2001 Dragster Front Engine : 5.879 @ 243.185
Brendan Murry,


2001 Dragster Front Engine : 5.879 @ 243.900
Brendan murry, Engine: Chevrolet, Supercharger: 6-71 littelfield Tires: M&H


2006 Dragster Front Engine trouble maker a/fd: 6.749 @ 201.160
kevin sine, Supercharger: littlefield 1071


1948 Dragster Front Engine Fuel Altered Fiat Topolino: 6.885 @ 129.720
Michael Tabacco, Engine: Mopar hemi 511ci, Supercharger: 1471 Tires: Hoosier 34.5x17x16


2006 Dragster Front Engine : 7.024 @ 196.930
Pat Hine, Engine: Chevy, Supercharger: 6-71


2005 Dragster Front Engine A/ND: 7.040 @ 191.830
Stu Sandhaus,


1969 Dragster Front Engine : 7.267 @ 182.110
Jed Dubach, Engine: injected small block chevy, Tires: goodyear


2004 Dragster Front Engine 23T Altered 115: 7.344 @ 185.070
Marc Sorger, Engine: 408 Big Block Chevy, Supercharger: 671 GMC Tires: Hoosier34.5X17X16


1970 Dragster Front Engine FRONT ENGINE NOSTALG: 7.547 @ 176.050
BOOM BOOM LEONARD, Engine: 377 CU. IN. SMALL BLOCK CHEVY, Tires: GOOD YEAR


1968 Dragster Front Engine Gilmore chassis/Hanna body: 7.570 @ 185.740
Paul Broughton, Engine: Chrysler 354, Supercharger: 6-71 Tires: Goodyear rear/Avon front


2000 Dragster Front Engine : 7.630 @ 170.020
Tammy Fargo, Engine: 370 SBC Iron block, Supercharger: 671unstripped Tires: 33x12x15 Goodyear


1923 Dragster Front Engine 23T-Altered: 8.130 @ 163.000
Doug Hrushka, Engine: 434ci. SBC, Tires: 14x32


1967 Dragster Front Engine slingshot: 8.182 @ 167.920
Bob Hawkins, Engine: Small block Chevy, Tires: Hoosier slicks and front runners


1933 Dragster Front Engine WILLY'S: 8.580 @ 151.000
Steve Duber, Engine: Cheverolet, Supercharger: BDS 871


1932 Dragster Front Engine altered: 8.590 @ 152.090
ray, Engine: 540,


1997 Dragster Front Engine Suncoast 23T Altered: 8.700 @ 149.250
JR Van Osten, Engine: 460 CID Chevy, Tires: Goodyears


1967 Dragster Front Engine jim davis: 8.870 @ 152.000
john stanovich, Engine: 360 sbc, Tires: hoosier 33x12x15 rear, 17x2.25 front


1968 Dragster Front Engine : 9.040 @ 148.220
Larry Hunter, Engine: 383 Chrysler, Tires: 13


1968 Dragster Front Engine : 9.590 @ 140.000
Samuel Scott IV, Engine: Chevy 350, Supercharger: N/A Tires: Hoosier


1979 Chevrolet Caprice Classic Coupe: 9.625 @ 147.000
Peter, Engine: BB Chevy 496 td, Tires: MH


 


©2014 DragTimes - Disclaimer