Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

Blacked Out Emblems with Plasti Dip

This product is awesome. It's not permanent, so you can mess up as much as you want. It's easy to apply. It's easy to remove. Try it on anything, if you don't like it just peel it off. I blacked out my emblems on my Nissan 370z. It looks really good if you want the "blacked out" look. Keep in mind that I was filming this with one hand and using my other hand to peel off the Plasti Dip, so I apologize for all the grunting and stuff. No homo. Common Answer #1: You will need approximately 3 cans to spray all four wheels using 4 coats on each wheel. Common Answer #2: You can buy Plasti Dip at Home Depot, Lowes, and OSH. Common Answer #3: Yes, it's safe to drive through the car wash and pressure wash over the Plasti Dip, but I wouldn't recommend it. Common Answer #4: It's not necessary to spray the inner wheel wells. I just sprayed the face of the wheel. Common Answer #5: The newspaper masking was to prevent over spray and makes cleaning up easier and quicker. Lastly, I made this video to show the car enthusiast community, who are interested in blacking out their emblems, a much easier way to do so without removing the emblem and painting it or buying a whole new black emblem. Plasti Dip can result in different textures depending on the outside temperature and how close/far you spray. Try it and see what works best for your specific application. Watch in 1080p for best viewing pleasure.


 


More Videos...


How To Plasti Dip Emblems and Front Grille - HD Step by Step - DipYourCar.com
** Your can buy all this stuff at www.dipyourcar.com ** A full, High Quality step by step guide on how to plasti dip your emblems, badges and front grille matte black. Fonzie from DipYourCar.com guides you through the process, showing tips, tricks and tools.





Tutorial Felgen Lackier Assistent Workshop/Felge silber lackieren/Rims Paint Assistant Tutorial
http://www.felgen-lackier-assistent.de/fla-lackierstaender/index.php - Mit der richtigen Hilfe kann heute nahezu jeder Felgen lackieren. Besuche unseren Online-Shop. Die Vorteile unseres Systems: Felgen einfacher und schneller bearbeiten und lackieren..., Ohne Indianertanz außen herum. - Die Felge ist beim Lackieren axial beweglich - Kein Außenherumlaufen beim Lackieren - Platzersparnis durch Rotationstechnik - Lackierzeit unter 2 Minuten pro Lackschicht - Weniger Lackverbrauch - Gleichmäßiger Lackauftrag - Geringere Abluftzeiten - Stets gleiche Lichteinflüsse - Mehr Spaß bei der Arbeit Für mehr Infos besucht unseren Online-Shop auf http://www.felgen-lackier-assistent.de oder schreibt uns eine email an felgen-lackier-assistent@web.de For more information visit our website www.felgen-lackier- assistent.de or send us an email at felgen-lackier-assistent@web.de WARNING: This is a video of how I painted my rims, from my knowledge and experience. If you prefer to do so in a different way, you have all right to do so This tool is patented





PlastiDip M3 Matte White - DipYourCar.com Pro Car Kit
DipYourCar Pro Car Kits sold here: https://www.dipyourcar.com/home.php?cat=15 Fonzie from DipYourCar.com dips a black 2010 M3 Matte White using the Pro Car Kit available at www.dipyourcar.com.





PlastiDip on Rims - New Brake Masking System!
Fonzie from Dipyourcar.com shows you a NEW and EASY way to dip your wheels while they are still on the car! Peel Coat





Aikka 4D Effect easy to spray Part.2.wmv
Ak 7060 4D Effect www.aikka.com.my





Create Carbon Fiber Look with Plasti Dip
DipYourCar Carbon Fiber Plasti Dip Kits: https://www.dipyourcar.com/product.php?productid=64&cat=33&page=1 Fonzie from DipYourCar.com shows you the process of how to paint a carbon fiber replica look using Plasti Dip.





PlastiDip LAYERING Technique! How to by DipYourCar.com
Full tutorial on how to layer one color of PlastiDip over another! Fonzie at DipYourCar.com shows you how. PlastiDip at the cheapest Prices - www.dipyourcar.com Fonzie@dipyourcar.com





Painting Hood Stripes With Plasti Dip
Plasti Dipping the hood of my 04 colorado and adding some custom striping to it. FAQ: Q: Do you have to pull the tape up when its wet? A: Yes, if you wait till it is dry, you will pull the plasti dip up.





How to Protect Your Headlights for $10 with Plastidip
How to DIY video, you can protect your headlights quickly and easily for around $10 using Plasti-dip! If you're looking for a good way to protect your investment from damage, this might be the solution for you.





DIY: Wrapping Rims in Matte Black Vinyl
I wanted to try a new style for my winter rims, and instead of pinting them i wrapped them in vinyl, Costs about $10 a rim. http://www.ebay.ca/itm/321097538225 This short video shows you how to wrap a rim quickly(sped up 3x), There really is no downfall to doing this, faster and cheaper then painting, the vinyl only weighs .4 ounces or about 50 grams. and thats spread out throughout the rim and if you dont like it then just peal it off. If you want more info or you want to buy some vinyl contact me at portabuddy@gmail.com Or come contact me at 8thcivic.com please don't send a message though youtube, I don't come here often. third year! http://i134.photobucket.com/albums/q110/portabuddy/winter/winter1_zps4be883 10.jpg Check it out on ebay for the full written DIY. http://www.ebay.ca/itm/321097538225 Or visit my ebay page at http://stores.ebay.ca/Sauga-Image and scroll down to Matte Black Vinyl Rim Wrap 6x 24"x24" Also the first song uses is a -rusko remix its rusko hold on sub focus remix, the second song is -supersonic the world of discotronic and the last song is the classic -chemical brothers hay boy hay girl with a dunstep remix.





Plastidip Taillight Tint Stencil Diy
Here are the answers to most of your questions.... 1. Will it come off? No it's not permanent but YES it is resilient. I had it on my lights for months with out it getting scratched or peeling. 2. Is this regular or smoke Plastidip It is regular. I do say this in the video, however I should have put it in the description. Sorry for the confusion. 3. Is that Forza Music? What kind of car is that? Yes it is! :) Makes for great ambient music. Also, it's a BMW 335xi. It's my winter car. (thus the whole "it's cold right now" in the video) 4. Yes it IS illegal. At least where I live. HOWEVER, no I didn't get pulled over once for it. I got pulled over for speeding and the cop didn't even mention it. I really think it just depends on the cop that is behind you and how he feels about it. 5. isn't it too dark? Aren't you worried about people not being able to see your lights when you brake? etc. No, in the video they might look KIND OF dim, but in person the light output was barely changed. HOWEVER, that doesn't mean that it wont be on your car. It depends on what kind of bulbs you have, HOW MANY COATS YOU DID, and just in general how nice your lights are. Either way, it was not an issue with me and not once did I get the impression that someone couldn't see them. Plastidip IS very transparent if you do a few light coats... you literally JUST watched proof that it is... lol 6. Why didn't you use film? or why didn't you use "night shade"? First off, I didn't use night shade because until I read these comments I hadn't ever heard of it. Second, I didn't use film because the other sets of film that i've used either didn't fit right, were a pain to take off, peeled up on the edges, and were much more expensive than this DIY. 7. Why did you use masking tape instead of electrical tape, duct tape etc. Because masking tape leaves ZERO residue. Duct tape and electrical tape can both leave lots of residue. As I stated in the Video though, you can always use flexible nylon/ straight line tape I believe for round edges. 8. Why didn't you just mask everything BUT the clear part then blah blah blah... really?... mask the part that I WANTED to paint?.... A. that would have taken forever B. it would have used WAY more paint. C. I would NEVER mask everything then use a razor on my tail lights.... thats just silly. 9. What was the point of the "press and seal" The point of that was to show you another way that I had seen it done. I then went on to say how I do not reccomend it cause you would get garbage results. 10. How many coats did you do? If you watch the video I technically did 1 coat. it was a thick coat but I did that because I knew I wasn't going to be laying it on to the point that it was not transparent. you will have to be the judge on how many coats/passes you do. Good news is, if you put on too much, or too little, no worries! It's plastidip and it'll come right off! Than do it again! 11. Could you do this on your headlights? I guess you could... although I could see that being a much easier way to get pulled over. But really, it's worth a try. Worst case is you tell the cop that pulls you over that you didn't realize it was illegal and ask him if he'll give you the opportunity to peel it off on the spot. 12. Do you feel the edges with your hands? You can if you rub your hand over it, but it's very faint. And no it did not make it peel. Really at the end of the day, Like I said in the video. Its not everyones style. It's non permanent, it's SUPER cheap, and most of all THIS MAINLY WAS A TEST AND A GUIDE ON HOW TO STENCIL YOUR TAIL LIGHTS not REALLY how to plastidip your lights. So use whatever product you want. I just used regular dip cause I had some lying around from doing window trim. And like most mods to your car, you're doing this at your own discretion, so be safe and use common sense. if you "black out" your lights, you may be running the risk of accident. So only go to the point that they are still safe. Thanks for all the thumbs up, and all the kind comments. Hopefully this answered most of your questions.





PlastiDip Car Emblems, Badges and Front Grille - Step by Step - DipYourCar.com
Full Tutorial on how to use PlastiDip to black out your emblems, badges and entire front grille! If you have access to the inside of the grille - we suggest sliding down either cardboard or newspaper to protect your cars inside parts.





PlastiDip - Masking, Lines and Stripes on Your Car - How to PlastiDip in Sections
Finally a tutorial on how to create lines, stripes, or plastidip sections of your car without the tape pulling up the PlastiDip!! Fonzie from DipYourCar.com shows you how. PlastiDip at the cheapest Prices - www.DipYourCar.com





Plasti Dip S4 Custom Blue Color DipYourCar.com Pro Car Kit
DipYourCar Pro Car Kits sold here: https://www.dipyourcar.com/home.php?cat=15 Fonzie from DipYourCar.com plastidipped his personal S4 a custom color blue plasti dip. Using the Pro Car Kit available at www.dipyourcar.com





Plasti Dip Overspray? No Worries
Here shows that while using Plasti Dip to paint your wheels, it is not necessary to mask off the tire. Have a look. Wheels are XXR 522 19x8.5 +15 fronts and 19x10 +20 rears. You will need approximately 3 cans of Plasti Dip to spray all four wheels. It depends on how generous you are with each coat. Any questions of comments, just ask. Thanks for watching. Where to buy: Plasti Dip can be bought from Lowes, Home Depot, and OSH. It also comes in other colors too. Each can is $6 USD. Temperature: Plasti Dip has been tested in temperatures from -30°F all the way up to +200°F. It maintains its flexibility, stretchiness, and other physical characteristics throughout this entire scale. Plasti Dip won't get brittle or crack in the cold, and it won't melt or become overly rubbery at high temps. Common Answer #1: You will need approximately 3 cans to spray all four wheels using 4 coats on each wheel. Common Answer #2: You can buy Plasti Dip at Home Depot, Lowes, and OSH. Common Answer #3: Yes, it's safe to drive through the car wash and pressure wash over the Plasti Dip, but I wouldn't recommend it. Common Answer #4: It's not necessary to spray the inner wheel wells. I just sprayed the face of the wheel. Common Answer #5: The newspaper masking was to prevent over spray and makes cleaning up easier and quicker. Keep in mind that only black Plasti Dip will benefit from this method. If you are using another color Plasti Dip, you may not be able to remove all the overspray from the tires. Watch in 1080p for best viewing pleasure.





Which car is faster? Which Car is Faster?




Similar 1/4 mile timeslips to browse:

1965 Ford Falcon Sprint: 8.140 @ 165.000
Vinnie Porcelli, Engine: 351 windsor by Headwinds, Tires: Mickey Thompson 32-14-15


1964 Ford Falcon futura: 9.124 @ 148.863
Tony Rabito, Engine: 454 sbf, Supercharger: N/A Turbos: N/A Tires: M/T


1999 Suzuki Bandit 1277 bandit: 9.920 @ 138.900
gary, Engine: 1277, Tires: shinko


2009 Ford Falcon XR6 Turbo: 10.031 @ 142.120
Matt, Engine: 4.0 ltr Barra inline 6, Turbos: MTA900 Tires: MT 275/40/17


1999 Suzuki Bandit s: 10.070 @ 137.000
gary, Engine: 1277,


1965 Ford Falcon Futura: 10.158 @ 129.960
Rodney Houze, Engine: 454 chevy, Tires: Hoosier 32/14.5/15


1984 Ford Falcon xe: 10.160 @ 133.000
john colaidis, Engine: 4lt, Turbos: gt42 Tires: slicks


1997 Suzuki Bandit : 10.227 @ 134.630
Jay M, Engine: 1246cc, Tires: Shinko 003


1997 Suzuki Bandit 1200s: 10.231 @ 131.870
Steve, Tires: shinco rear


1992 Ford Falcon xd: 10.360 @ 128.000
mark l, Engine: 351ci clevland, Supercharger: no Turbos: no


1984 Ford Falcon xe esp: 10.560 @ 129.780
john colaidis, Engine: 4lt, Turbos: gt42 Tires: mickey thomson et streets


1967 Ford Falcon Sport Coupe: 10.601 @ 125.230
Mike Gardner, Engine: 2012 Dart block Ford 363, Tires: Hoosier 31x10.5x15


2001 Suzuki Bandit 1200: 10.697 @ 121.420
Royal Hunter, Engine: 1157cc stock, Supercharger: none Turbos: none Tires: Shenko Stealth


2001 Suzuki Bandit S: 10.725 @ 127.170
Matt M, Engine: 1200, Tires: Pirelli Angel ST


1985 Ford Falcon gl: 10.760 @ 127.000
john, Engine: 250 crossflow, Turbos: gt42roller


1999 Suzuki Bandit S: 10.796 @ 127.190
J.W. Rich,


1999 Suzuki Bandit 600 s 907 big bore: 10.900 @ 124.000
Mike Michaud, Engine: 600/907 custom build,


2002 Suzuki Bandit 1157: 11.019 @ 121.900
Ryan Pappas, Engine: 1157, Tires: Shinko 006


2004 Suzuki Bandit 1200: 11.062 @ 122.360
J. Gaines,


1974 Ford Falcon XB Fairmont sedan: 11.070 @ 123.020
Brenden, Engine: 393 cleveland, Tires: MT front runners and MT ET street drag 26*10.5*16


 


©2014 DragTimes - Disclaimer - Contact Us