Just showing the custom CAI on my 1994 Eagle Vision TSI Only paid est.$100 total and works just AS good if not better
mods:custom CAI,summit racing muffler,no tailpipe,no resonator,no secondary accesory belt,and no a/c compressor
"The Eagle Test Drive" featuring the 1996 Eagle Vision and Talon
Michael Brockman of Motor Trend fame explains how you the car shopper can
inspect and test drive a new car. Surprisingly it's not really about
plugging Eagle's cars, but rather what you should check for and test when
looking at new cars. Of course, all the things he mentions a good new car
should do and have are all things his Eagle Vision test car has and does...
GM 3.8 Intake Manifold replacement. Removal the fast way WITH NOTES
this is the "Flat Rate " way to do a 3.8 liter upper and lower intake
manifold set. as you see it is not necessary to take off he serp belt,
alternator or tensioner assembly to remove the lower manifold. I recomend
having someone help when it is time to reinstall the manifold because it
can be tricky to lien up the coolant elbow and not mess up the lower
gaskets when reinstalling. Note that it is recomended to disconnect the
negative battery cable when doing any major repairs. This video is just to
show some guys that said that a lower manifold cant be pulled in way less
than 20 minutes, I know that I went over that , but I had some stuborn
injectors and Im a little out of practice. If you are going to do this
yourself and you are not a professional I recomend that you follow the
procedure in a service manual
How To - Cold Air Intake
In this video I'll show you how to build and install a cold air intake for
your vehicle. This is a DIY project that only took about $30 total to
accomplish including the $25 cone filter.
Need To buy Parts? Get them cheaper Here:
Offroad Parks: http://bleepinjeep.com/offroad-parks
Tee Store: http://bleepinjeep.com/store
Coupon Codes: http://bleepinjeep.com/discounts
*Disclaimer - This product is meant for entertainment purposes only. Your
mileage may vary. Do not try this at home. Void where prohibited. Some
assembly required. For off-road use only. Slippery when wet. Batteries
not included. Do not use while operating a motor vehicle, heavy
equipment, cherokee, wrangler, or any jeep vehicle. May be too intense for
some viewers and children under 30 years of age. Please remain seated
until the ride has come to a complete stop. Studies have shown viewing
these videos causes increased cancer risks in laboratory test people. I am
not a professional, I have no training, I'm not even particularly good at
horse whispering. Don't believe everything that you know. Please keep
your hands in the vehicle at all times. Do not tap on glass. Do not eat
anything that has been on the floor for more than 3 days. Keep your hands
to yourself. Not to be taken internally. Reproduction strictly
prohibited. Driver does not carry cash. Objects in jeep mirrors may be
farther than they appear.*
Dodge Intrepid, Eagle Vision and Chrysler Concorde running footage and features
This is a narrated dealer video showing some of the major features of the
1995 Dodge Intrepid, Eagle Vision and Chrysler Concorde. Three of the cab
forward LH sedans from the 1990s. This is when Chrysler Corporation
actually made innovative, competitive FWD cars.
I do not claim any ownership over the copyrights to this video. It was
recorded off the TV around 1995 and I have not seen it anywhere since, so I
thought I would share it with the world. This video has not been monetized
and therefore I am not earning revenue from it.
How To Install Cold Air Intake (CAI) for 96-04 Mustang | AutoHow.TV
Visit: http://www.autohow.tv/node/38 for more info...
A cold air intake (CAI) is a great way to improve gas mileage, increase hp
and get a throatier sound from the engine. Watch this video and you can
avoid common pitfalls with this install...
If you like these in-depth videos subscribe to the AutoHowTV channel or
join the mailing list at http://www.autohow.tv
Eps 25 DIY cold air intake install
make your own cold air intake for around $60 instead of paying around $300
Fix It Right! - Intake Manifold Gasket Replacement
Fix It Right! - Intake Manifold Gasket Replacement (S1E4)
Demonstrated on a 2004 Buick Century 3.1L V6 FWD.
In this video, we demonstrate how to perform an intake manifold gasket
replacement on a front-wheel-drive 3.1L V6 engine, in this case in a 2004
Buick Century. This is a common point of failure on General Motors' 3.1L,
3.4L, and 3.8L V6 engines, which are used in a large number of passenger
cars across most of GM's model lines.
*** DIY POSSIBLE, BUT TOUGH ***
This repair task should only be attempted by advanced DIYers.
IMPORTANT NOTE: Please read the disclaimer text at the start of the video
before attempting anything shown therein. Take your time, take care, and be
About the "Fix It Right!" video series:
"Fix It Right!" is a series of how-to videos intended to give
do-it-yourselfers basic instructions on proper vehicle repair and
maintenance. All of our videos show real repairs being performed on real
vehicles by real technicians in a real auto shop. (Repairs are filmed and
shown with the permission of the vehicles' owners.) Although there may be
more than one way to perform any particular repair (and in many cases there
are lots of ways!) we try to focus on the methods that will be safest and
most expedient for DIYers with limited access to tooling and equipment.
We will also occasionally be showing repair processes that are too complex
or dangerous for DIY, or require specialized tooling, expertise, equipment,
and/or certifications. Those episodes will highlight the importance of
hiring a professional auto technician for tasks that are not DIY-friendly,
and demonstrate why such tasks are best left to professionals.
Please click "like" on this video, as it encourages us to make more! If you
find this video helpful, we'd also appreciate it if you "favorite" it as
well. And, as always, subscribe to our channel for the latest news and
information on upcoming videos.
Find us on Facebook:
Our Twitter Feed: