New World's Fastest Car! Ford GT Bad v8 1700 Hp - 455.817 km/h ( Guinness World Records )
Subscribe to our Gaming Channel:
Performance Power Racing Re-Sets the Guinness World Records holding for
Fastest Standing Mile-Street Car at 283.232 mph
Johnny Bohmer Owner of Performance Power Racing and Driver of the World
Famous BADD GT, along with Matt Lundy, Lead Design Tech, piloted the 1700+
horse power Ford GT down NASA's Shuttle Landing Facility Runway this week
setting a new Guinness World Record at 283.232 mph in the Standing Mile.
The Standing Mile is an event in which a vehicle, from a dead stop,
accelerates completely through the one mile mark.
New Hella Dayline LED DRL kit
Quick unboxing and review of the new Hella Dayline universal LED DRL kit.
Ford F-150/ SVT Raptor Truck ORACLE LED Off-Road Mirror Installation DIY Video
Ford F150/Raptor Off-Road Replacement LED Mirror Caps.
This innovative new product from ORACLE Lighting will be making its debut
at the 2013 SEMA Show and features a set of high powered LED light bars
integrated into the factory-style side mirrors caps of Late Model Ford
F-150 and Raptor Models. This integration allows for easy installation and
a clean, almost OEM look while providing functional peripheral illumination
for the driver.
Why is peripheral illumination important? Factory headlights and most
auxiliary lights only illuminate the area in front of the vehicle. Ideally
for off-road activities, such as trail riding, the driver needs to be able
to clearly see the area on the sides of the trail to spot obstructions,
which would otherwise go unnoticed and could be a potential hazard.
Besides being functional these new LED Mirrors from ORACLE Lighting look
great as well! The LED light bar is a custom design that features a total
of 24 powerful Cree LEDs. This gives the driver a increased visibility and
peripheral illumination. Each unit has a 45° beam angle to optimize the
driver's peripheral visibility weather riding on the trail or in the
desert. Multiple aluminum heat sinks are used to effectively wick heat away
from the LEDs and are designed to use the airflow through the mirror
housing to increase cooling similar to a radiator.
The housing material is made from rugged Polycarbonate and bolts onto the
vehicle using the factory mounts for easy installation. A set of anodized
rock guards protects the LED acrylic lenses, which also houses the DBM
Reflex LED optics. These efficient optics focus the light for optimal
visibility from the driver seat position.
For more information please visit www.ORACLELIGHTS.com or call
SPECDTUNING INSTALLATION VIDEO: UNIVERSAL TRUCK LED TAILGATE LIGHT BAR
SPECDTUNING is proudly recognized as pioneers in the automotive industry
for products and service. Our main goal is to provide the highest quality
products at the lowest prices imaginable. The SPECDTUNING warehouse is the
largest in Southern California carrying an array of aftermarket products.
With a wide range listing from: Projector Headlights, L.E.D. Tail Lights,
Third Brake Lights, Bumper Lights, Corner Lights, Front Grills, Bumper
Lips, down to Headers. These are just a few items mentioned from the
selection available. Furthermore, all the products are updated constantly
keeping SPECDTUNING ahead in the industry for all makes and models of
vehicles. Always prepared to serve every guest; please visit us at
SpecDtuning.com for more info or call 909-839-2533 to start a wholesale
account today or visit us at www.specdtuning.com. Staff at SpecDtuning are
here and ready to help.
DAYTIME BrightLites LED Puddle Light Install -All Ford Models.wmv
Daytime BrightLites creates automotive LED lighting products with a true
This video provides step-by-step instructions to install our LED Puddle
Lights on all Ford car models that come with the puddle light feature. See
more details on this and our other LED upgrade products by following the
link on the title page of this video.
At Daytime BrightLites,
"We make your stock lights BrightLites"
2013 Hyundai Genesis Update! (Video 2)
I did all my mods myself so any questions feel free to ask.
-Plastidipped rims and emblems
-Blacked out Tail lights VHT
-5% tint all around(Fresh Window Tint)
-Flowmaster Muffler Swap quad tips
-DiodeDynamics 6000k HID low beams, Stage 2 switchback LED front turn
signal, Stage 3 LED rear turn signals (must use resistors for all turn
signals), Stage 3 back up LEDs, Stage 3 LED full interior lighting kit
(White), Stage 4 LED trunk strip, Stage 3 license plate LEDs (white)
-Rockford Fosgate P3 12" sub in a ported box, 4 RF 6.5's in doors and back
seat, RF 1" tweeters in front doors
-Hifonics HFI 1000.1D Monoblock on the sub
-Hifonics Zeus 600.4 4-channel amp on 6 speakers
-MONSTER wiring all along with 0gauge power and ground wire
-2 in line converters for Amps RCAs
-Center Console IPod Location
-Injen Short Ram Intake (SRI)
-Forged atmospheric Blow off valve(BOV)
-SFR ECU tune stage .5
How to Install Footwell Lighting that Fades with Dome Light in a 2006-current Honda Civic
Cost: Around $20-30 Difficulty: Intermediate Required Skills:
partial disassembly of a car's interior, and use of a soldering iron
Looking for the giant clock video?
UPDATE: According to various comments, this will work for the current
Honda Civic (or at least 2012 models) and will also work for the sedan.
Make sure you test the wires first, though, in case something is different.
If you're going to try it on these models, make sure you find out how to
remove the paneling--the process may have changed. Again, this video was
made specifically for the North American 8th generation Civic Coupe, which
covers model years 2006-2011. You will likely have to alter the procedure
in some way for all other models.
This is my first how-to video, so please bear that in mind when you watch
I've been wanting to install footwell lighting in my car (a 2009 Civic
Coupe) for a little while, and instead of just doing it, I decided that I
should record my progress and make a video of it for YouTube. Well, here
This modification wasn't nearly as difficult as it was time consuming. I
mention in the video that it takes 1-2 hours to complete, however this is
if you have access to all your materials at one time. I spread this out
over a few days and ended up spending much more time then I thought it
would take, just because of my start-and-stop schedule.
Basically, what makes these footwell lights unique is that they are tapped
from the dome light's power, so they will dim in and out with it. It took
me a very long time to find the information on the series of tubes that is
the Internet that showed where the dome light's wires were. I have to
thank the people at 8thcivic.com for contributing to a forum that
eventually gave me all the info I needed.
Some users have reported compatibility issues with the wire
taps/scotchlocks and the light strips. Ii is my recommendation to solder
wires directly to the strips, either using the solder pads or the wires
that may have come with your strips. However, for those who are
apprehensive of using a soldering iron (after all it can be dangerous), be
advised that you may have to use two sets of wire taps--one to make new
wires from the OEM wires, and another to tap your lights to these new
wires. Again, I always recommend soldering since it provides a better
connection, both electrically and mechanically. But if you want to avoid
soldering, just remember that you may need to find away around various
TO ADD A SEPARATE SET OF LIGHTS that stays on whenever the ignition is on,
use a fuse tap (which can be found at most auto parts stores) of the
correct size. If I remember correctly, this is for the ATM fuses. The
fuse tap does not need to be low-profile like the fuses are in the car.
Tap the radio fuse, or any other fuse that does not receive power when the
key is removed. Technically, the lights will be on when the key is in the
ACC or ON positions. The radio fuse was the only fuse that I found worked.
Use the smallest size fuse that came with the fuse tap for your new
lights. Then, wire the positive for these lights to the fuse tap and
ground them to something metal under the dashboard. I highlighted what I
used to make a ground at 12:38--I simply used a zip-tie and some bare wire,
looping the wire around the ring and securing it with the zip-tie.
DISCLAIMER: I will not be responsible for any damage that you cause to
your vehicle as a result of performing this modification, nor will I be
responsible for any voiding of warranties that may result from this
modification, and nor will I be responsible for any local laws that may be
broken by the use of footwell lighting. Since this footwell lighting only
operates when a door is opened (the dome light switch does not make the
footwell lights come on) or the car is being unlocked from the outside, I
doubt it would break any laws. However, if there are laws prohibiting
footwell lighting in your area, any fines or other consequences of breaking
the laws shall not be my responsibility.
YOU CAN NOW GET A 5 METER STRIP OF THESE LIGHTS FOR ABOUT $15 ON AMAZON!
Just search for LED Strip lights or Tape lights. You can also find them in
waterproof versions. If you want to do more projects with these lights,
look for them on Amazon. If you would like to add LED underglow, which I
explain how to do in another video, I would order a waterproof 5 meter
reel, and use a small portion for the footwell lights.
Besides the actual LEDs, most of the other materials required can be found
around the house. Remember to always remove the fuse to the circuit you'll
be working on, and be sure to check that the fuse you removed does indeed
protect your desired circuit.
Thanks for watching!
Trunk light video: http://www.youtube.com/watch?v=k_HXqIdIuMo
2009 Ford F150 Side Mirror Issue
A 2009 ford f150 has an issue with the automatic side mirrors
All I had to do was replace the mirror toggle switch that I found at the
GT150 SPORT TRUCK CONVERSION FOR 2010 F150
STREET SCENES CUSTOM FRONT AND REAR FASCIA, HIDDEN LICENSE PLATE HITCH,
UPPER AND LOWER BILLETT GRILLES, BODY COLOR HANDLES AND MIRRORS, GT150 NAME
PLATE, FENDER VENTS, CHROME 22" WHEELS/TIRES
Straight type LED Daytime Running Light HL-DRL-LED-06.mov
6w each high power LED DRL, with signal turning function, high/low
brightness change, when engine starts, the two lights will on, engine off,
two lights off, with wire harness, easy to install, please find more
product details at: http://www.hidled.com