DEATH OF A TRANS AM WS6!!
After a year of beating on the stock block after all the mods, and approaching 98k miles, the LS1 block finally started having excessing blow-by in the cylinders and also blowing oil into the upper crankcase housing. It ran strong, producing idle launch 1/4 times of 12.4 @ 118MPH. But....IT'S TIME TO GO BIG!! Updates on the way... Car has LS1 motor, cam, Dart Pro 1 stage 3 heads, headers, Borla Exhaust, cutout, LS6 intake, lid, K&N, tune, ASP pulley, Hurst shifter, shift light, Nitto Drag Radials, DragLite wheels, Moser 4.10 gears and more. Motor work was done at East Texas Muscle Cars. Airbrushing by Allen Jonez - lid design is from the Disturbed Ten Thousand Fists album. Be sure to check us out on Facebook at Triple-X Motorsports & Outdoors for all the latest updates! http://www.facebook.com/TripleX.Motorsports
MOTOR BLOWS IN GMC MUD TRUCK WHILE PULLING DEEP MUD HOLE!!
Red GMC blows pistons right through the side of the 350 block while pulling a mud hole at Highlifter Park near Shreveport, Louisiana - 2/12/11. Brett pulls him back to camp with his GMC, althogh the front pinion bearings go out in his truck on the way back, so he finishes the afternoon in 2WD. Be sure to check us out on Facebook at Triple-X Motorsports & Outdoors for all the latest updates! http://www.facebook.com/TripleX.Motorsports
COBRA, CORVETTE, G8 and BOOSTED CIVICS! DYNO DAY AT EAST TEXAS MUSCLE CARS!
Dyno and tune your ride at East Texas Muscle Cars! www.easttexasmusclecars.com Two turbo Civics, both on high Boost. 2003 Ford Cobra Terminator: Steg. IV ported blower & TB, C&L inlet pipe, Metco CAI, Metco 6lb lower crank kit, Metco 3.5in alt. pulley, Metco double bearing idler pulleys, Metco snub idler, LFP Intercooler reservoir, LFP HD heat exchanger, MGW shifter, Spec 3 plus clutch, Spec 2 piece aluminum flywheel, Metco driveshaft loop, D.S.S. level 5 half shafts with hardened yokes/inner CV joints, billetflow IRS brace, Brembo drilled/slotted rotors, SLP loudmouth Exhaust, Ford GT twin pumps, Mafia puck and injectors. 2008 Pontiac G8 GT - Lingenfelter supercharged: 418 stroker from Texas Speed, along with LS3 CNC 72cc heads, Lingenfelter gt9 cam, Magnacharger TVS2300, Roto Fab CAI, full length Exhaust, long tube headers/Corsa mufflers, 3200 stall converter, tune, and aftermarket fuel delivery system. 2006 C6 Corvette - D1 Procharger @ 11lbs on stock block, AFR heads, headers, cam, FAST 102 intake, meth injection, 6spd with racing clutch, tuned by Dallas Performance - 766RWHP/639RWTQ. Be sure to check us out on Facebook at Triple-X Motorsports & Outdoors for all the latest updates! http://www.facebook.com/TripleX.Motorsports
LINGENFELTER SUPERCHARGED 2008 Pontiac G8 with NITROUS - DYNO PULL!!
Daniel Linnett's 2008 Pontiac G8 GT Dyno tuning at East Texas Muscle Cars. Attempting to get optimum Boost with adequate fuel. Even after changing the fuel pump, the car was still loosing pressure at full Boost near 6k RPMs. Never was able to spray Nitrous and tune accordingly. With spray, car should easily produce over 600RWHP. Car has Magnacharger MP1900 TVS, Roto Fab CAI, full length Exhaust, long tube headers/Corsa mufflers, stall converter, tune, aftermarket fuel delivery system and 75 shot. Be sure to check us out on Facebook at Triple-X Motorsports & Outdoors for all the latest updates! http://www.facebook.com/pages/Triple-X-Motorsports-Outdoors-RekjavicXXX/143 751552330968 #27 - Most Discussed (Today)) - Autos & Vehicles #47 - Top Favorited (Today)) - Autos & Vehicles #53 - Top Rated (Today)) - Autos & Vehicles