To answer some of the questions in the comments:
***The Traxxas Slash is waterproof***
1) This was taken at Pipal Park in Omaha, Nebraska.
2) I am driving my Traxxas Slash VXL 4x4 1/10 scale short course truck.
3) This is a water fountain that had recently been shut off for winter. Not a public urinal.
4) No, this is not a real truck.
5) Yes it is battery powered. At the time I was running 8.4 volt NiMh battery but have since changed to a 7.4 volt LiPo which can be seen in my later videos.
Axial Wraith VXL boggin at Crawler World Oct 26, 2011
Backyard TTC course
Mudpit revised with 100lbs of clay
120mm Hot Racing shocks
Traxxas VXL-3s system(motor/esc)
Normal gearing 16/87 48pitch
Hot Racing knuckles and c-hubs
Hot Racing 120mm shocks
Toward Pro MG946R servo @ 7.2 volts
Kimbrough 1/4 scale servo saver(black) or Traxxas "large" saver (white)
Robinson Racing transmission gears
Axial 43/13 HD differential gears
RC4WD frt diff cover
Vanquish rear diff cover
Custom shock mounts and upper tie bars
Custom straight links, 8/32 mild steel all-thread w/6mm brakeline, Traxxas
Custom length 4 link bars approx 5mm shorter front, 10mm shorter rear
Custom 4 bend steering link using the XR side of knuckles and lovin' the
Custom aluminum axle toobz
Custom aluminum body with integrated inner fenders and 2 piece aluminum
Custom tonneau cover made from wax coated paper, under coat, and gloss
JB Welded or epoxied Axial HD lockers, currently looking at solutions for
the weak stock lockers
May be seen running an HPI open front differential with silicone diff
Modified stock driveshafts, dual females w/aluminum inner tube
Stock plastic rear axle lock outs
Stock dog bones
Battery in rear, 5000mah 2S or 4000mah 3S
Weighs approx 8lbs with the CAC's @7.5lbs with the Hammers
Trail set - CAC EZ locks w/Super Swampers, memory foam, no vent holes, no
weight added, approx 8oz each total, installed with the "narrow" offset
11.5" from edge to edge.
Crawl set - Axial 8 holes wheels with half spun hex mod :D Super Swampers,
no foams, sealed with airsoft pellets, fronts weigh approx 12oz and the
Speed set - RPM Revolvers, crawler wide offset with Proline Hammers and
memory foam, 7oz fronts and 6.2oz rears.
2010 ROAR Region 4 Mod 4wd Short Course
Your MR TQ, the Team HobbyCrap driver Felix Law got the "Love Tap" by Tim
Potter, but after that, he never look back. Felix won this class with his
J- Concepts equipped 4x4 slash.
Traxxas John Force Funny Car Launch 18t pinion gear
testing the new 18t pinion gear launch, seemed to get better low end
traction at around 60% launch control on the dial, with the stock 14t
pinion it would have spun the tires and flipped over. topped out at 54.8
mph w the 18 t the 14 t was 52 mph
Hotwheels colour shifters car chase
Hello, I am the creator of this video. I have no clue whatsoever of how
this got over 7 million views and to clear everything up and try to stop
people saying all of this negativeness and hate. I made this when I was 9
years old, yes NINE, and I didn't know much about stop motion and smooth
stop motion, I was just being creative. So can everyone just please have
some respect and stop all of this negativeness, thank you. :)
Extreme Trucking - Big Trucks Defekt. Defekt předního kola. Oversize
transport. Pricks and the resulting explosion wheels. Взрывные
колеса.Transport Nosreti. Originál Defekt.European Union official
video. Nejkopírovanější video Youtube.
If you add a link to my video, you can use it to compilations:
Real Man's 4WD Track
A Land Rover Defender drives up a "Real Man's" 4WD track.
One brave soul attempted it in a Landcruiser but failed before even getting
both sets of wheels on the ramp. He is currently at home trying to fix his
The video was taken at the Maitland 4WD & Camping Show 2009 and the
ramp is 5.5M above the ground.
The majority of the drive is done with the driver seeing nothing but sky.
Slash 4x4 Catches some air!
I made this quick compilation of my Slash at a local skate park. The grand
finale is a 15 foot launch off a quarter pipe. Enjoy!