GunMetal Gray Plasti Dip - Wheels and Rims - DipYourCar.com
DipYourCar Wheel kits purchased here:
Fonzie from DipYourCar.com shows you the new GunMetal Gray Plasti Dip in a spraycan on his S4 wheels. How to and what the color looks like. Peel Coat
Peeling Plasti Dip off a Whole Car
Our experience peeling Plasti Dip off of the DYC A4.
Notice: All cars, paints, and surfaces are unique. Please refer to Terms
and Conditions page on www.dipyourcar.com for more info and guidelines
DipFoam System here:
Fonzie from DipYourCar.com shows a full car Plasti Dip peeling removal.
Dipped car peeled off and cleaned,
Removing plasti dip from alloy wheels
*** NEW VIDEO *** 6 Months removal of plastidip http://youtu.be/1CUTYxEkTmY
Here we are removing the blaze orange plasti dip from an alloy wheel, the
plasti dip had been on the wheel for about a month. This stuff is very
durable as the car had been driven on dirt roads daily and there was no
peeling or missing dip. You really have to dig your nail into it to start
the removal process. See more photos on Instagram @justdipit_aus
Many more projects to see.
DIY: PlastiDipping Wheels 4 Different Ways
In this video, I will show you how to dip your wheels from beginning to
end. I used 4 cans of matte black PlastiDip to get the job done. I went
with a total of 4 coats on the wheels. Started off with light coats and
moved my way up to a thick wet coat for the end.
If you have any questions, please post them in the comments below. Thanks
again for watching.
ECS Tuning: How To Measure For ECS Tuning Wheel Spacers
Spacers Available At: http://www.ecstuning.com/?utm_source=Youtube
Spacers for your racer. ECS Tuning lets you tweak your stance--or swagger
down the road with a 20mm monster offset. Available in 5x100, 5x112, and
5x120 bolt patterns.
Choose from our huge inventory of hub centric spacers in thicknesses sure
to match your car, your wheels, and your shopping budget.
All spacers are corrosion protected: 2,3, and 4mm spacers are zinc plated
steel; thicker spacers, in sizes ranging from 5 to 20mm, are anodized
aluminum. Buy them alone or with matching lug bolts.
plasti dipping my car custom color.
http://www.youtube.com/watch?v=3q5oxdSInpY -------new dip color! share,
hello today I plastidipped my saab custom color, enjoy. sorry about the
stopage of film. i use my phone and i just wanted to get it finished. just
ordered some new dip so better quality filming is to come! check out my new
video of peeling it! http://www.youtube.com/watch?v=qp2wv486G_A
Anthracite Grey Plasti Dip - Audi R8 Wheels
Anthracite Grey Metallic Plasti Dip - exclusively available at
We used the Anthracite Grey Wheel Kit - Gloss finish in this video. 4
coats of Anthracite Grey and 2 coats of Glossifier.
Create Carbon Fiber Look with Plasti Dip
DipYourCar Carbon Fiber Plasti Dip Kits:
Fonzie from DipYourCar.com shows you the process of how to paint a carbon
fiber replica look using Plasti Dip.
DIY: Wrapping Rims in Matte Black Vinyl
I wanted to try a new style for my winter rims, and instead of pinting them
i wrapped them in vinyl, Costs about $10 a rim.
http://www.ebay.ca/itm/321097538225 This short video shows you how to wrap
a rim quickly(sped up 3x), There really is no downfall to doing this, faster and cheaper then painting, the
vinyl only weighs .4 ounces or about 50 grams. and thats spread out
throughout the rim and if you dont like it then just peal it off. If you
want more info or you want to buy some vinyl contact me at
firstname.lastname@example.org Or come contact me at 8thcivic.com please don't send a
message though youtube, I don't come here often.
Check it out on ebay for the full written DIY.
Or visit my ebay page at
and scroll down to Matte Black Vinyl Rim Wrap 6x 24"x24"
Also the first song uses is a
-rusko remix its rusko hold on sub focus remix, the second song is
-supersonic the world of discotronic and the last song is the classic
-chemical brothers hay boy hay girl with a dunstep remix.
Blacked Out Emblems with Plasti Dip
This product is awesome. It's not permanent, so you can mess up as much as
you want. It's easy to apply. It's easy to remove. Try it on anything, if
you don't like it just peel it off.
I blacked out my emblems on my Nissan 370z. It looks really good if you
want the "blacked out" look.
Keep in mind that I was filming this with one hand and using my other hand
to peel off the Plasti Dip, so I apologize for all the grunting and stuff.
Common Answer #1: You will need approximately 3 cans to spray all four
wheels using 4 coats on each wheel.
Common Answer #2: You can buy Plasti Dip at Home Depot, Lowes, and OSH.
Common Answer #3: Yes, it's safe to drive through the car wash and pressure
wash over the Plasti Dip, but I wouldn't recommend it.
Common Answer #4: It's not necessary to spray the inner wheel wells. I just
sprayed the face of the wheel.
Common Answer #5: The newspaper masking was to prevent over spray and makes
cleaning up easier and quicker.
Lastly, I made this video to show the car enthusiast community, who are
interested in blacking out their emblems, a much easier way to do so
without removing the emblem and painting it or buying a whole new black
Plasti Dip can result in different textures depending on the outside
temperature and how close/far you spray. Try it and see what works best for
your specific application.
Watch in 1080p for best viewing pleasure.
how to Plasti dip SMOKE test on tail light test sur feux arrières by mtk diy & peel off
plasti dip SMOKE
As its name suggests, this plastic dip spray SMOKE will allow a slight
smoking your headlights, taillights, windows, logo, emblem, monograms and
all other materials.
The principle is the same as the plastic dip is a product that provides you
with the opportunity to go back without damage to the surface on which it
has been applied.
The indisputable advantage of Plasti Dip SMOKE is obviously the possibility
of giving a color more or less dark according to the number of layers, and
if you do not like or is not appropriate for law enforcement, it suffices
simply remove it as a sticker.
on aluminum wheels and the aluminum, it provides a titanium color
Comme son nom l'indique, cet aérosol de plasti dip SMOKE va permettre un
léger fumage de vos phares, feux, vitres , logo ,emblèmes, monogrammes et
tout autres matériaux.
Son principe est le même que le plasti dip c'est a dire que ce produit
vous offre avec la possibilité de revenir en arrière sans dommage sur la
surface sur laquelle il à été appliquée.
L'avantage incontestable de Plasti dip Smoke, c'est bien évidement la
possibilité de donner un teinte plus ou moins sombre suivant le nombre de
couche, et si cela ne vous plait pas ou ne convient pas aux forces de
l'ordre, il suffit simplement de le retirer comme un simple autocollant.
sur les jantes alu et sur l'alu, il procure une couleur titane