1998 Acura CL 2.3 parts AUTO WRECKERS RECYCLERS anhdonline.com Honda used
AH Parts Dismantlers http://www.anhdonline.com / 877-859-0023
AH Parts sells only used Honda & Acura parts!
1998 Acura CL 2.3, for parts. If you would like to buy parts from this vehicle, contact us via phone, youtube, or our website.
Honda Accord VTEC Solenoid Gaskets Replacement
In this video I show you how to replace both VTEC solenoid valve gaskets (valve to cylinder head and solenoid to valve) on 1994-1997 Accords.
This is a common cause of oil leaks on the upper passenger side of the engine next to the distributor shaft seal, distributor o ring, and valve cover gasket.
It seems the same engineers who buried the Accords fuel filter also decided to make the VTEC solenoid valve difficult to remove as well. One of the bolts for the valve is buried so deep you have to partially drain the cooling system and use a u-joint to get it out.
I take your through the process step by step from removal of all the parts to re installation.
This video ran a bit longer than I wanted it to but considering how deceptively easy this job looks at first glance (until you can't get that one remaining hidden bolt on the valve off to remove it) I decided to leave in as much detail as possible.
You will need to add new coolant and bleed the cooling system to avoid engine damage after you're done. If you need that info here is the link to my cooling system bleeding video.
Honda part numbers used in the video:
Solenoid to valve gasket: 36172-P0A-005
VTEC valve to cylinder head gasket: 15825-P0A-015
VTEC oil pressure switch o-ring: 91319-PR3-003
Thermostat housing to intake gasket: 91312-P0A-000
Thermostat housing to connecting pipe o-ring: 91314-PH7-003
These part numbers should work on all 1994-1997 Accords with VTEC but as always check with your dealer to confirm these part numbers will work with your vehicle.
Intro and outro music by Kevin Macleod (Incompetech.com).
P0401 EGR Valve Port Cleaning
This is my DIY for clearing the CEL code P0401 (EGR Insufficient Flow) on a 98 Honda Prelude.
In cars with OBD2 if the EGR valve is restricted by carbon deposits it will detect that and throw a CEL. To get rid of that CEL you must clean out the carbon to allow flow.
After combustion occurs within the engine it creates Exhaust. Gas from the Exhaust straight from the engine is very bad for the air. The EGR valve recaptures that Exhaust and runs it through the combustion process again, which lowers the temperature of the fumes (Exhaust gas) and lowers the amount of pollution exiting into the atmosphere.
If you don't fix it you won't pass SMOG in California. You may experience rough idling and poor acceleration.
Get your "EGR port plugs" from Honda. They will have it.
Removing the injectors are important to allow clearance to the port plugs.
When you pull out the injectors you might as well clean them since they are out.
Slide hammers make pulling the port plugs out easily.
Drill with a bit the size of your tap. Drilling halfway through the port plug to should be enough distance to fully grab the port with the slide hammer.
If after you clean your ports and valve the CEL has not been cleared, you EGR valve maybe faulty and needs to be replaced.
1998 Acura CL 2.3 For Sale
123k, Auto, black with gray leather interior, moonroof, power windows, door locks, Kenwood stereo, 18 inch Racing Hart knockoffs.
1998 Acura CL 3.0 Premium Start Up, Exhaust, and In Depth Tour
In this video I give a full in depth tour of the 1998 Acura CL 3.0 Premium. I take viewers on a close look through the interior and exterior of this car while showing details, over viewing of features, and noting unique styling cues to the vehicle itself. I also show the engine and the details of it, start it up and see how it sounds under acceleration. A thorough tour/review of this car designed to give others a greater overall appreciation of the vehicle.
Parting out 1998 Acura CL 100103
Tom's Foreign Auto Parts http://www.tomsforeign.com 1-800-973-5506 Lots of parts available on this car still. We part out thousands of late model foreign cars every year. Let us know what parts you need in the comments or come by our site and search our inventory. Check us out on Facebook at http://www.facebook.com/pages/Toms-Foreign-Auto-Parts/152092512666
What is VTEC and How Does it Work? - EricTheCarGuy
What is VTEC and How Does it Work? - EricTheCarGuy
I've been editing some full length video this week and I came across this bit from a car I worked on last spring. The animations are courtesy Honda Motor Company, thanks guys. I think the title is self explanatory and I hope the video makes it a little clearer for those who are curious about this system and how it works. I've had a couple of requests for this and I hope this answers those questions.
Click below and Stay Dirty
Visit me at EricTheCarGuy.com
Visit EricTheCarGuy Forum
Visit my Facebook Page:
1998 Acura CL 2.3CL w/Premium Pkg. - for sale in Point Pleasant , NJ 08742
Leonard Perry Motors
703 Bridge Avenue
in Point Pleasant , NJ 08742
Come test dirve this 1998 Acura CL 2.3CL w/Premium Pkg. for sale in Point Pleasant , NJ.
12 month 15,000 mile warranty
Check out this LOW MILEAGE Acura, its fully loaded...leather/sunroof and power everything! It has a nice smooth ride and the dependability of a Honda. The leather is in great shape and it has nice lines. Its a really sharp looking coup.
Provided by Carsforsale.com
2003 Acura CL Type-S
A walk-around of my car
Engine Revs: http://www.youtube.com/watch?v=QjJ5SDgLCec
Teknotik.com B20 Vtec Engine Assembly and Build
Import Excellence | Performance | Parts | Installation
Teknotik is your Canadian Source for high quality Import Performance Parts
B20 Vtec Timelapse
-B20B Bottom End
-ARP Head Studs
-Blackworks Racing B20/LS Vtec kit
-OEM Head Gasket
-OEM Valve Cover Gasket
Teknotik is your Canadian Source for Import Performance Parts, specializing in Honda and Acura. We carry and distribute many lines of high quality Performance from engine, to suspension, cooling, exterior, and ECU parts. We are also an importer of JDM (Japanese domestic market) Engines.Offering friendly service and full warranty on parts and engines, we can provide everything that you need for your engine swap, or the performance parts to Boost your hp from basic bolt on to full turbo kits. Be sure to check with us for any suspension modifications, as we are experts on getting your car dialed in for optimum performance on the circuit through full suspension, brakes and suspension related tuning parts(camber, castor, toe, preload). Install also is available. Teknotik also provides Honda/Acura ECU tuning and conversions: Custom ECU mapping, Dyno-- full wideband tuning on all naturally aspirated or forced induction cars
If for some reason you do not find what you are looking for on our website, just give us a call or send us an email and we will gladly do the searching for you.
98 Honda Prelude H22a4 Head Gasket Replacement PT1
I just bought this car fairly cheap. It had dropped a valve in cyl #4, damaged the original head, and piston. I replaced the head and piston. The car ran good for a few days, and then it blew the head gasket. I originally used a cheap JIS head gasket. This time around I used a Fel-Pro head gasket. I had to have the head rechecked, and machined. Everything checked out fine.