2005 bagged out Chevy colorado. I read a few of your comments and i thought id give u guys a lil better description. So here it goes; FBSS layin frame on 22" milanni kool whips. The suspension is sittin on 2600s in the front and 2800s in the rear, all 450psi slam specialities HE series. Im runnin 1/2" airline through GC 450 extreame valves at 200psi with 2 viair 480c compressors on a 7 gallon tank. Its got tubular upper and lower control arms with 2" drop ball joints in the front. In the back, a monster tringulated four link with super pivots and its bagged on the bars. Hence the 2ft of lift in the back. The rearend has been cut dwn about 2" to get it to tuck the 2s. I built this in my dads garage with a grinder, a saw zaw, and a welder. Special thanx to my boys that put in the long hrs wid me. I love lowriders so if u got any questions email me lowlife1038@yahoo.com. I appreciate the comments and i kno haters gonna hate. Its ok u can hate on me:)
Heritage 2011 with The Drag Shop
LIKE US ON FACEBOOK! www.facebook.com/grindertv
We visited the small town of Whitesburg, KY to check out Heritage 2k11. One of the only shows that shuts down the entire town with full police and city support. Brandon Perry from the Drag Shop showed us around West Virginia before making the 400 mile round trip to Kentucky. This show is definitely one to mark down on any minitruckers bucket list!
Music: Theophilus London-I Stand Alone (Ocelot Remix)
Colorado Speed Burnout
Our Colorado Speed Project Truck laying some rubber down! If you want a peek at one of the hottest rides out there, this truck is at SEMA right now!
Produced by JakeMedia
http://jakemedia.ca
bagged on 24s, lift at 125 psi
Wheels/Tires for sale!
Gianelle "Spezia 6" 24x9 wheels with Pirelli pzero tires. Rear tires are 285/30/24 and front tires are 255/30/24. Distance from mounting surface to outside of wheel is 6.5" with a 9" wide wheel = -1.25" offset. Bolt pattern is 5 on 4.75; these were purchased for my 2003 chevy s10 project truck. Chrome wheels for one side of the truck and black wheels for the other (you can only see one side of the truck at a time). The truck has been sitting unfinished and I'd like to sell the wheels/tires. The tires have about 100 yards on them, the truck was never driven with the wheels/tires mounted, only pushed a couple times on/off a trailer at car shows. The tires still have the little nubby things on them from being new. Wheels are in excellent shape, they were mainly used for mock-up when building suspension. Wheels will need to be balanced as the balancing weights have come off. I paid $5,300 for these and asking $1200 FIRM + shipping. Wheels will fit GM 5 lug vehicles 5x4.75 or 5x120.65 bolt patterns.
bagged ram
newest update! http://www.youtube.com/watch?v=tZREY76M1PI
fresh from paint. more updates to come
the truck: firestone bags all around, 8 valves, 1/2" lines on nitrogen. 10" notch in the rear with custom 4 link (fabricated) and kyb shocks off a 72 saab. front has a tie rod flip kit (fabricated), raised control arm mounts to minimize negative camber (fabricated), custom shock mounts, raised transmission support, relocated gas tank, hand cut bed frame. the bed was widened 3" to keep the wheels tucked nicely, shaved doors,tailgate,antenna, rollpan, and 3rd brake light. smoke front and rear lights, 30" plasma in the dash and still not done. believe it or not, it had never occured to me to pictures of the build until today.
chevy colorado magnaflow exhaust
2004 chevy colorado 3.5
Gutted Cat
FrozenBoost AllFlow 2nd Cat
Magnaflow side Exhaust
lowered 3/3
17 inch mb blitz wheels on 255/60/17 tires
link to more info
http://www.355nation.net/forum/i4-i5-engine-drivetrain/48744-my-new-magna-flow-side-Exhaust.html
