5th Scale BurnOut Time! FG Dragster Test Runs
Finally, I'm taking my FG Dragster out for a testrun. The dragster is
powered by a BZM 28.5 Torque Tuned engine which I dropped in a FG
Sportsline 2WD. I've converted my Sportsline chassis to a 1970's Dodge
Challenger, with lots of custom parts. In the video series you will be able
to follow this build from the very start, to the point where it will
finally start burning some rubber!
The custom servo setup works great, the BZM has massive torque, and I love
running this scaled down muscle car! A few alterations will be made in the
future, such as a bit thicker diff oil, and perhaps a different clutch to
make it engage a bit more aggressively. For a first run, I was more than
satisfied and this ride is everything I hoped it to be.
For more information about the FG Sportsline, visit the FG Modellsport
For more information about HemiStorm Products feel free to join us on
To visit the HemiStorm website and have a look at the products we develop
for largescale RC cars, click the following link:
For more information about BZM Micro engines, and the full range of
additional products and gear, check out the following link:
When you install your electronics in your gas powered car, always remember
to use a killswitch. Killer RC has a great range of products that assist
you in interrupting the ignition of the car and turning the engine off in
case of emergency. Safety first, for yourself and those around you.
For more information about the Killer RC products used on this build, visit
"Hoorn Staat Op" by Dubbel B & Ontoppadiz ft. DJ DNS
Music used with the explicit permission of the rightful owners.
For more info about Dubbel B check out the following link:
Make sure to subscribe to Dubbel B on YouTube by clicking the following
Intro music purchased at Productiontrax.com
License Option B: Commercial, for-profit, distribution, or broadcast, all
Packages, and Photos
NASTY Camaro Crash UP CLOSE! - Brand New Car Totaled
Tommy Franklin came out of this crash uninjured. Unfortunately this was the
3rd or 4th pass on a brand new Garret Race Cars built Pro NitrousCamaro. Tommy is back out with a
new car and is currently sitting #2 in points in the PDRA Pro Nitrous class. For more info on the PDRA Drag
Racing series check out http://www.pdra660.com/
Radial vs The World - Fastest Drag Radial Cars Video Coverage
Radial vs The World Video Coverage from No Mercy from SGMP Duck X
1/8th Mile Drag Racing
Like The Video? Show me by Giving it a Like, Subscribing, and Sharing!
Every little thing helps, Thanks!
Make Sure you Check out our Website for Blogs, Photos, and More at:
Make sure you Keep up with the Videos by Subscribing to the Youtube
Give Our Facebook Fan Page a Like at:
Follow our Instagram for Photos and Exclusive Videos at:
Nyce1s.com - Wildrides @ Shakedown 2008!!!
Here is a compilation of some of the best crashes, explosions, and wheelies
from the 2008 Shakedown @ E-Town drag race event.
Check us out at http://www.facebook.com/nyce1s !!!
Checkout more race videos at http://www.nyce1s.com/forum !!!
Checkout http://www.nrgtechracing.com for more information on one of the
Northeast's premiere performance facilities!!
JCG Restorations 1968 Camaro -- /BIG MUSCLE
Tucked away in a small industrial park in Oxnard, CA sits JCG Restorations
& Customs, a moderately sized shop that has built some of the best
performing pro-touring cars that we've ever driven. Now generally we don't
focus in on shops, however when the owners of three of our best test cars
start dropping names, we tend to listen. Originally we descended on JCG to
drive Blu Balz, a stunning 1968 Camaro owned by one Karl Dunn.
However since Mother Nature decided to water the Earth that day, we put our
original plans on hold and got shop owner Cris Gonzalez to give us the in's
and out's of what it takes to make a stellar pro-touring car.
WHEELIE Camaro @ Street Car Takeover OKC!
Take a ride along in a Camaro at SCT OKC's Drag Race day
as it effortlessly pulls the wheels for the first 100 feet of the track.
Very simple setup, very fun results. Not sure if I'd enjoy the giant
wheelie or winning the race more, but he had to choose one at this race!
'67 Crusher Camaro vs '70 Super Bee 1,500-Mile Burnout-Fest! - Roadkill Episode 19
On this episode of Roadkill, it's Freiburger in the Super Bee versus
Finnegan in the '67 Camaro as the guys make the trip
from Los Angeles to Salt Lake City and back to go race at the Midnight
Drags at Rocky Mountain Raceways in hopes of running the Bee on Nitrous for the first time since the Hemi was
installed. Which car will work best over 1,500 miles of mayem in three
The 700hp, blown Crusher Camaro is HOT ROD's longest-term
project car, surviving 20 years at the magazine. David Freiburger's 675hp
Hemi 1970 Dodge Super Bee is his first car, having been with him 30 years.
Both cars suffer from magazine-project-car syndrome: getting brief spurts
of attention followed by long periods of neglect. For the first time in
years, both cars were running and driving at the same time.
The Crusher Camaro is a
'67 model that was purchased for $700 in 1994 during California's
car-crushing program; it was rescued from the parking lot of a junkyard
where it was about to be handed in for crushing. It's been through a number
of engines in its time at HOT ROD magazine, and the most recent is a 489ci
bi-block (4.280 bore, 4.250 stroke) with 9.3:1 compression. It has a small,
224-at-0.050 Comp hydraulic roller cam, Holley oval-port heads, and a
Weiand 8-71 Supercharger with two Holley
850HP carbs. The engine makes 700 hp and 720 lb-ft on 5 psi Boost, but is tame enough to drive anywhere.
The transmission is a Gearstar 4L85E that's really awesome, and the Ford
9-inch is loaded with 3.50 gears. The car is styled with Center Line Auto
Drags and a nose-high stance to look like a street machine of the early
¹80s. It has run 10.60 at 125 in the quarter-mile in the same trim seen in
Freiburger's ¹70 Dodge Super Bee is powered by a 10:0:1-compression, 484ci
Hemi with ported iron cylinder heads and a Comp solid roller camshaft. It
also uses a Holley Dominator carb on a custom dual-plane intake manifold by
Dick Landy, whose shop built the long-block in 1995. It made 675 hp on the
engine Dyno, but in
the car is has smaller headers, fairly restrictive Exhaust, and a mechanical fan that pull it down
to around 600. The trans is a Gearstar 727 Torqueflite backed by a Gear
Vendors under/overdrive, and the Strange 60 rearend has 3.73 gears (a
little too high for the
natuarally aspirated combo). The car weights 4,050 pounds with the driver,
and has run 11.80 at 118 mph on the motor.
Roadkill appears every fourth Friday on the Motor Trend channel.
Subscribe now to make sure you're in on all the action!
Facebook - https://www.facebook.com/RoadkillShow,
http://facebook.com/motortrendmag & http://facebook.com/hotrodmag
Twitter - http://twitter.com/motortrend &
Google+ - https://plus.google.com/1018679678590...
Website - http://www.motortrend.com & http://www.hotrod.com