Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

50 DOLLAR PAINT JOB TREMCLAD/RUSTOLEUM PART 3 OF 6

Spent a little more than 50 dollars on this paint job due to body damage that had to be fixed. Materials: -1 Gallon Tremclad (Canadian name for Rustoleum, same company) gloss black. -600, 1000, 1500, 2000 Grit Wet sand-paper -1 Gallon Mineral Spirits - 4 inch. High-Density Foam Roller - Assorted sized Foam Brushes - Tack clothes - Measuring Cup - Sanding Block Things can get messy so I also bought latex work gloves. There are a few other things that I bought that may not be very important to you E.G. Bucket, sponge, respirator, body filler, body shaper. Step 1: Use 600 Grit wet sand-paper to scuff the existing paint on the vehicle, be sure to scuff especially on edges and of doors, windows. Was the car and let it dry. Once dry remove remaining dust with a tack cloth (IMPORTANT) Step 2: Mix paint and mineral spirits 50/50. I used 1 cup of paint for 1 cup of mineral spirits to cover the car once. Make sure you mix thoroughly! Step 3: Apply light coat to car. Don't be alarmed by how little it actually covers, this is merely the first coat and it is important to just get a base going. Let paint dry at least 6 hours or more depending on the weather in your area. Step 4: Mix more paint with mineral spirits if necessary and apply 2nd coat. Keep the coat thin, again the paint wont cover much until at least your 4th coat depending on the previous color of the paint. Let car dry at least 24 hours (IMPORTANT) Step 5: Wet sand with 1000 Grit sand-paper and wash the car. Let dry and apply tack cloth. Step 6: Apply coats 3 and 4 using same method as previously stated. and so on.... you want to wet sand your car every 2 coats going up in grit every time i.e. after coat 4 you will wet sandind with 1500 grit and after coat 6 2000 grit....you get the picture. The amount of coats needed depends on the condition of the previous paint and how well the new paint sticks to the vehicle. You be the judge. I only put 5 coats on mine. Comment if you have any questions and I'll try to answer them in a timely fashion. Thanks.


 


More Videos...


50 DOLLAR PAINT JOB TREMCLAD/RUSTOLEUM PART 4 OF 6
Spent a little more than 50 dollars on this paint job due to body damage that had to be fixed. Materials: -1 Gallon Tremclad (Canadian name for Rustoleum, same company) gloss black. -600, 1000, 1500, 2000 Grit Wet sand-paper -1 Gallon Mineral Spirits - 4 inch. High-Density Foam Roller - Assorted sized Foam Brushes - Tack clothes - Measuring Cup - Sanding Block Things can get messy so I also bought latex work gloves. There are a few other things that I bought that may not be very important to you E.G. Bucket, sponge, respirator, body filler, body shaper. Step 1: Use 600 Grit wet sand-paper to scuff the existing paint on the vehicle, be sure to scuff especially on edges and of doors, windows. Was the car and let it dry. Once dry remove remaining dust with a tack cloth (IMPORTANT) Step 2: Mix paint and mineral spirits 50/50. I used 1 cup of paint for 1 cup of mineral spirits to cover the car once. Make sure you mix thoroughly! Step 3: Apply light coat to car. Don't be alarmed by how little it actually covers, this is merely the first coat and it is important to just get a base going. Let paint dry at least 6 hours or more depending on the weather in your area. Step 4: Mix more paint with mineral spirits if necessary and apply 2nd coat. Keep the coat thin, again the paint wont cover much until at least your 4th coat depending on the previous color of the paint. Let car dry at least 24 hours (IMPORTANT) Step 5: Wet sand with 1000 Grit sand-paper and wash the car. Let dry and apply tack cloth. Step 6: Apply coats 3 and 4 using same method as previously stated. and so on.... you want to wet sand your car every 2 coats going up in grit every time i.e. after coat 4 you will wet sandind with 1500 grit and after coat 6 2000 grit....you get the picture. The amount of coats needed depends on the condition of the previous paint and how well the new paint sticks to the vehicle. You be the judge. I only put 5 coats on mine. Comment if you have any questions and I'll try to answer them in a timely fashion. Thanks.





Rustoleum Paintjob, Eric's old EE Wagon
just a video i had in a folder. painted this car a few months ago and totally forgot about it. car is sold now but i saw it recently and the paint is still great. in the video here i did a 70/40ms mix and it shot well. had some problems with the gun so there was some drips but overall it was super shinny with very minor orange peel.





50 DOLLAR PAINT JOB TREMCLAD/RUSTOLEUM PART 5 OF 6
Spent a little more than 50 dollars on this paint job due to body damage that had to be fixed. Materials: -1 Gallon Tremclad (Canadian name for Rustoleum, same company) gloss black. -600, 1000, 1500, 2000 Grit Wet sand-paper -1 Gallon Mineral Spirits - 4 inch. High-Density Foam Roller - Assorted sized Foam Brushes - Tack clothes - Measuring Cup - Sanding Block Things can get messy so I also bought latex work gloves. There are a few other things that I bought that may not be very important to you E.G. Bucket, sponge, respirator, body filler, body shaper. Step 1: Use 600 Grit wet sand-paper to scuff the existing paint on the vehicle, be sure to scuff especially on edges and of doors, windows. Was the car and let it dry. Once dry remove remaining dust with a tack cloth (IMPORTANT) Step 2: Mix paint and mineral spirits 50/50. I used 1 cup of paint for 1 cup of mineral spirits to cover the car once. Make sure you mix thoroughly! Step 3: Apply light coat to car. Don't be alarmed by how little it actually covers, this is merely the first coat and it is important to just get a base going. Let paint dry at least 6 hours or more depending on the weather in your area. Step 4: Mix more paint with mineral spirits if necessary and apply 2nd coat. Keep the coat thin, again the paint wont cover much until at least your 4th coat depending on the previous color of the paint. Let car dry at least 24 hours (IMPORTANT) Step 5: Wet sand with 1000 Grit sand-paper and wash the car. Let dry and apply tack cloth. Step 6: Apply coats 3 and 4 using same method as previously stated. and so on.... you want to wet sand your car every 2 coats going up in grit every time i.e. after coat 4 you will wet sandind with 1500 grit and after coat 6 2000 grit....you get the picture. The amount of coats needed depends on the condition of the previous paint and how well the new paint sticks to the vehicle. You be the judge. I only put 5 coats on mine. Comment if you have any questions and I'll try to answer them in a timely fashion. Thanks.





How to paint your car with Rustoleum. The right way.
I've been asked to make this vid a million times. So here it is. This is a how-to regarding the 'Rustoleum technique'. I go over everything from mixing the paint to applying a clear coat. It takes a lot of blood, sweat, and tears, but if you have the determination, you can get great results. Sorry about the repetitive audio. Youtube muted my original audio so I had to change it quick.





50 DOLLAR PAINT JOB TREMCLAD/RUSTOLEUM PART 6 OF 6
Spent a little more than 50 dollars on this paint job due to body damage that had to be fixed. Materials: -1 Gallon Tremclad (Canadian name for Rustoleum, same company) gloss black. -600, 1000, 1500, 2000 Grit Wet sand-paper -1 Gallon Mineral Spirits - 4 inch. High-Density Foam Roller - Assorted sized Foam Brushes - Tack clothes - Measuring Cup - Sanding Block Things can get messy so I also bought latex work gloves. There are a few other things that I bought that may not be very important to you E.G. Bucket, sponge, respirator, body filler, body shaper. Step 1: Use 600 Grit wet sand-paper to scuff the existing paint on the vehicle, be sure to scuff especially on edges and of doors, windows. Was the car and let it dry. Once dry remove remaining dust with a tack cloth (IMPORTANT) Step 2: Mix paint and mineral spirits 50/50. I used 1 cup of paint for 1 cup of mineral spirits to cover the car once. Make sure you mix thoroughly! Step 3: Apply light coat to car. Don't be alarmed by how little it actually covers, this is merely the first coat and it is important to just get a base going. Let paint dry at least 6 hours or more depending on the weather in your area. Step 4: Mix more paint with mineral spirits if necessary and apply 2nd coat. Keep the coat thin, again the paint wont cover much until at least your 4th coat depending on the previous color of the paint. Let car dry at least 24 hours (IMPORTANT) Step 5: Wet sand with 1000 Grit sand-paper and wash the car. Let dry and apply tack cloth. Step 6: Apply coats 3 and 4 using same method as previously stated. and so on.... you want to wet sand your car every 2 coats going up in grit every time i.e. after coat 4 you will wet sandind with 1500 grit and after coat 6 2000 grit....you get the picture. The amount of coats needed depends on the condition of the previous paint and how well the new paint sticks to the vehicle. You be the judge. I only put 5 coats on mine. Comment if you have any questions and I'll try to answer them in a timely fashion. Thanks.





A to Z $50 Rustoleum Regal Red Paint Job DAY4 Truck F150 1987
Sprayed rustoleum automotive gray primer out of the rattle can. Now rolling rustoleum regal red paint over it.





How to Spray Paint a Car at Home Yourself (Aerosol)
See the Materials Used Here http://www.refinishnetwork.com/car-painting-how-to/item/309-how-to-paint-a- car-yourself Refinish Network consists of various professional and enthusiast painters whom work collectively to help eachother out using the websites discussion forum. You will also find various helpful 'how to' articles from painting to body repairs. This video illustrates how to paint a car using only aerosol spray cans. It is best to use a spray gun where possible, however it is possible to paint a car yourself with an Aerosol Spray Can.





Professional results from a spray can. The right way
I showed you how to roll it on, now I show you how to spray it on. I'm not sure who did the music, as soon as I find out I will update this.





50 DOLLAR PAINT JOB TREMCLAD/RUSTOLEUM PART 2 OF 6
Spent a little more than 50 dollars on this paint job due to body damage that had to be fixed. Materials: -1 Gallon Tremclad (Canadian name for Rustoleum, same company) gloss black. -600, 1000, 1500, 2000 Grit Wet sand-paper -1 Gallon Mineral Spirits - 4 inch. High-Density Foam Roller - Assorted sized Foam Brushes - Tack clothes - Measuring Cup - Sanding Block Things can get messy so I also bought latex work gloves. There are a few other things that I bought that may not be very important to you E.G. Bucket, sponge, respirator, body filler, body shaper. Step 1: Use 600 Grit wet sand-paper to scuff the existing paint on the vehicle, be sure to scuff especially on edges and of doors, windows. Was the car and let it dry. Once dry remove remaining dust with a tack cloth (IMPORTANT) Step 2: Mix paint and mineral spirits 50/50. I used 1 cup of paint for 1 cup of mineral spirits to cover the car once. Make sure you mix thoroughly! Step 3: Apply light coat to car. Don't be alarmed by how little it actually covers, this is merely the first coat and it is important to just get a base going. Let paint dry at least 6 hours or more depending on the weather in your area. Step 4: Mix more paint with mineral spirits if necessary and apply 2nd coat. Keep the coat thin, again the paint wont cover much until at least your 4th coat depending on the previous color of the paint. Let car dry at least 24 hours (IMPORTANT) Step 5: Wet sand with 1000 Grit sand-paper and wash the car. Let dry and apply tack cloth. Step 6: Apply coats 3 and 4 using same method as previously stated. and so on.... you want to wet sand your car every 2 coats going up in grit every time i.e. after coat 4 you will wet sandind with 1500 grit and after coat 6 2000 grit....you get the picture. The amount of coats needed depends on the condition of the previous paint and how well the new paint sticks to the vehicle. You be the judge. I only put 5 coats on mine. Comment if you have any questions and I'll try to answer them in a timely fashion. Thanks.





SATA - How to paint correctly
This film explains a few important topics regarding paint jobs. Please consider local laws - as there is a standard for respirators and pressurized air filters.





Rust-Oleum Automotive - How to Spray Paint
Tips, techniques and instructions on how to properly spray paint with Rust-Oleum spray paint products.





A to Z $50 Rustoleum Regal Red Paint Job DAY1 Truck F150 1987
Things needed to do the job: Tools, Paint, Sand Paper, Spray Primer Etc.





50 DOLLAR PAINT JOB TREMCLAD/RUSTOLEUM PART 1 OF 6
Spent a little more than 50 dollars on this paint job due to body damage that had to be fixed. Materials: -1 Gallon Tremclad (Canadian name for Rustoleum, same company) gloss black. -600, 1000, 1500, 2000 Grit Wet sand-paper -1 Gallon Mineral Spirits - 4 inch. High-Density Foam Roller - Assorted sized Foam Brushes - Tack clothes - Measuring Cup - Sanding Block Things can get messy so I also bought latex work gloves. There are a few other things that I bought that may not be very important to you E.G. Bucket, sponge, respirator, body filler, body shaper. Step 1: Use 600 Grit wet sand-paper to scuff the existing paint on the vehicle, be sure to scuff especially on edges and of doors, windows. Was the car and let it dry. Once dry remove remaining dust with a tack cloth (IMPORTANT) Step 2: Mix paint and mineral spirits 50/50. I used 1 cup of paint for 1 cup of mineral spirits to cover the car once. Make sure you mix thoroughly! Step 3: Apply light coat to car. Don't be alarmed by how little it actually covers, this is merely the first coat and it is important to just get a base going. Let paint dry at least 6 hours or more depending on the weather in your area. Step 4: Mix more paint with mineral spirits if necessary and apply 2nd coat. Keep the coat thin, again the paint wont cover much until at least your 4th coat depending on the previous color of the paint. Let car dry at least 24 hours (IMPORTANT) Step 5: Wet sand with 1000 Grit sand-paper and wash the car. Let dry and apply tack cloth. Step 6: Apply coats 3 and 4 using same method as previously stated. and so on.... you want to wet sand your car every 2 coats going up in grit every time i.e. after coat 4 you will wet sandind with 1500 grit and after coat 6 2000 grit....you get the picture. The amount of coats needed depends on the condition of the previous paint and how well the new paint sticks to the vehicle. You be the judge. I only put 5 coats on mine. Comment if you have any questions and I'll try to answer them in a timely fashion. Thanks.





rustoleum painted camaro
This is a Camaro restoration being done and there will be more to come!! Rustoleum paint job!!





How To Do A Rustoleum Roller Paint Job For $70 And A Cheap Way to Fix Rust Holes $20
For $100 I put a quick patch job on this tired old Chevy Truck and plan to flip a quick buck. Rolled on a coat of Rustoleum and patched up the huge rust holes in the cab corners. They're notorious for rusting out. Got some aluminum flashing for housing ($10), buy the guttering dept in Lowes, Home Depot, etc. It's thin and easily shaped and cut with standard scissors. Clean the rust deposits out from the site. Set some jack stands down. Cut a piece of the thin aluminum to length and set it on top of the jackstands almost touching the rusted area. Get a can of High Strength Window sealent or Great Stuff ($4 at home depot) as it's called. Start foaming the area in and piling layer over layer of sealent on top of the aluminum. Once it is built up, fold the aluminum up and set jack stands over to keep it help up. The foam will expand and is extremely sticky when wet. Wear gloves! Once it's had a day to set, pull off the aluminum and saw off the excess with a hack saw blade or knife. Sculpt it to form and check the results. Can drill out holes in the aluminum, place it on and put screws to hold the aluminum on the foam once dryed.





Which car is faster? Which Car is Faster?




Similar 1/4 mile timeslips to browse:

2005 Mazda 6 Drag Car: 7.930 @ 187.000
Ed Bergenholtz, Engine: 2.3L Mazda i4 by Golden Eagle Mfg., Supercharger: None Turbos: Garret GT45 Tires: M & H


2006 Mazda 3 : 10.150 @ 134.000
Vincent Tiaga, Engine: Mazda I4, Supercharger: na Turbos: na Tires: M&H


2006 Mazda 6 Mazdaspeed: 11.381 @ 123.940
Anthony Pannone, Turbos: ATP GTX35R Tires: Conti DWS 215/45/18


2006 Mazda 6 Mazdaspeed 6: 11.612 @ 119.220
Anthony Pannone, Engine: 2.3l MZR DISI, Turbos: GT3076R Tires: hankook evo V12


2005 Mazda 3 SP23: 11.659 @ 128.790
Kurt Scott, Engine: 2.3L, Supercharger: N/A Turbos: GT3582


2008 Mazda 3 mazdaspeed3: 11.682 @ 117.170
NJSPEED3, Engine: 2.3L mzr/disi , Turbos: T3 HTA3586 .82ar


2006 Mazda 6 Mazdaspeed 6: 12.011 @ 113.930
Andrew , Engine: 2.3 MZR, Turbos: GT3071R Tires: Federal SS


2006 Mazda 6 Mazdaspeed 6: 12.240 @ 114.270
Anthony Pannone, Engine: 2.3L MZR turbo, Turbos: GT3076 Tires: hankook evo V12


2007 Mazda 6 Mazdaspeed: 12.263 @ 111.750
Rich Brockman, Engine: Stock, Supercharger: n/a Turbos: Stock Tires: 225 55 17 Conti DWS Extreme


2007 Mazda 6 mazdaspeed6: 12.301 @ 113.200
Jeff Hawkes, Engine: MZR 2.3T, Turbos: stock k04


2008 Mazda 3 MPS: 12.350 @ 119.830
RE-ACTIONENGSPEED3, Engine: mzr, Turbos: k4 hybrid


2006 Mazda 6 sport: 12.370 @ 111.000
charles, Engine: 2.3, Turbos: 7 blade gt3076 ported .55 a/r hotside Tires: nitto neo gens 245/35/19


2007 Mazda 6 MPS: 12.501 @ 112.000
MazdaGaragePat, Engine: MZR 2261 cc, Turbos: Garrett GT3076 T3 divided 1.06 Tires: 235/40 R18 Federal 595 RS-R


2006 Mazda 6 mazdaspeed6: 12.550 @ 109.000
charles, Engine: 2.3l, Turbos: gt3076 Tires: Bf goodridge kdw 235/35/18


2007 Mazda 6 Speed6: 12.620 @ 110.090
p057, Engine: stock, Turbos: gt3071 Tires: hankook ventus v12s 225/40/18


2006 Mazda 6 speed6: 12.624 @ 107.800
charles, Engine: 2.3 turbo, Turbos: gt3076 Tires: NITTO NEO GENS


2006 Mazda 6 Mazdaspeed 6: 12.655 @ 111.360
Anthony Pannone, Engine: stock, Turbos: GT3076R


2006 Mazda 6 Mazdaspeed6: 12.655 @ 111.750
Andrew Helm, Engine: stock block, Turbos: GT3071r Tires: Nitto NT555


2009 Mazda 3 Speed3: 12.737 @ 108.510
Daniel Lalonde, Engine: mzrdisi 2,3, Turbos: k04 Tires: Toyo RA1 235/40/17@16psi


2008 Mazda 3 Mazdaspeed 3: 12.793 @ 106.900
driver311, Tires: m@h 24.5x8.5x15 inch slicks


 


©2014 DragTimes - Disclaimer