Drag Racing 1/4 Mile times 0-60 Dyno Fast Cars Muscle Cars

67 Plymouth GTX

Dyno tuning @ Blood Enterprises


 


More Videos...


Daredevil Driving Stunts in a 1936 Plymouth: "Trial by Torture" 1935 Chrysler Corporation
more at http://cars.quickfound.net/ Toughness of the 1936 Plymouth is demonstrated by showing how components, structures, and the entire vehicle are "torture tested." Includes several good shots of deliberately rolling cars, and daredevil driving by "Hell Drivers' such as Lucky Teter and Jimmy Lynch. Public domain film from the Prelinger Archive, slightly cropped to remove uneven edges, with the aspect ratio corrected, and mild video noise reduction applied. The soundtrack was also processed with volume normalization, noise reduction, clipping reduction, and/or equalization (the resulting sound, though not perfect, is far less noisy than the original). http://creativecommons.org/licenses/by-sa/3.0/ http://en.wikipedia.org/wiki/Plymouth_(automobile) Plymouth was a marque of automobiles based in the United States, produced by the Chrysler Corporation and its successor DaimlerChrysler. Production was discontinued on June 29, 2001 in the United States. The Plymouth automobile was introduced on July 7, 1928. It was Chrysler Corporation's first entry in the low-priced field, which at the time was already dominated by Chevrolet and Ford. Plymouths were actually priced slightly higher than their competition, but offered all standard features such as internal expanding hydraulic brakes that the competition did not provide. Plymouths were originally sold exclusively through Chrysler dealerships. The logo featured a rear view of the ship Mayflower which landed at Plymouth Rock. However, the Plymouth brand name came from Plymouth Binder Twine, chosen by Joe Frazer for its popularity among farmers... The origins of Plymouth can be traced back to the Maxwell automobile. When Walter P. Chrysler took over control of the troubled Maxwell-Chalmers car company in the early 1920s, he inherited the Maxwell as part of the package. After he used the company's facilities to help create and launch the Chrysler car in 1924, he decided to create a lower-priced companion car. So for 1926 the Maxwell was reworked and re-badged as the low-end Chrysler "52" model. In 1928, the "52" was once again redesigned to create the Chrysler-Plymouth Model Q. The "Chrysler" portion of the nameplate was dropped with the introduction of the Plymouth Model U in 1929. Great Depression, 1940s and 1950s While the original purpose of the Plymouth was to serve a lower-end marketing niche, during the Great Depression of the 1930s, the marque helped significantly in ensuring the survival of the Chrysler Corporation in a decade when many other car companies failed. Beginning in 1930, Plymouths were sold by all three Chrysler divisions (Chrysler, DeSoto, and Dodge). Plymouth sales were a bright spot during this dismal automotive period, and by 1931 Plymouth rose to the number three spot among all cars. In 1931 with the Model PA, the company introduced floating power and boasted, "The economy of a four; the smoothness of a six." In 1933 Chrysler decided to catch up with Ford and Chevrolet with respect to engine cylinder count. The 190 cu in version of Chrysler's flathead-6 engine was equipped with a downdraft carburetor and installed in the new 1933 Plymouth PC, introduced on 17 November 1932. However, Chrysler had reduced the PC's wheelbase from 112 in (284.5 cm) to 107 in (271.8 cm), and the car sold poorly. By April 1933, the Dodge division's Model DP chassis, with a 112 in (284.5 cm) wheelbase, was put under the PC body with DP front fenders, hood, and radiator shell. The model designation was advanced to PD and the car was marketed as the "DeLuxe" 1933 Plymouth. This car sold very well and is the 1933 model most commonly found in collections. The PC became the 'Standard Six'. It had been the 'Plymouth Six' at introduction, and was sold through to the end of 1933, but in much lower numbers. It is consequently in the minority in collectors' hands today. In 1937, Plymouth (along with the other Chrysler makes) added safety features such as flat dash boards with recessed controls and the back of the front seat padded for the rear seat occupants. The PC was shipped overseas to Sweden, Denmark, and the UK, as well as Australia. In the UK it was sold as a 'Chrysler Kew', Kew Gardens being the location of the Chrysler factory outside London. The flathead 6 which started with the 1933 Model PC stayed in the Plymouth until the 1959 models. In 1939 Plymouth produced 417,528 vehicles, of which 5,967 were two-door convertible coupes with rumble seats. The 1939 convertible coupe was prominently featured at Chrysler's exhibit at the 1939 New York World's Fair, advertised as the first mass-production convertible with a power folding top. It featured a 201 cu in, 82 hp version of the flathead six engine. For much of its life, Plymouth was one of the top-selling American automobile brands; it together with Chevrolet and Ford were commonly referred to as the "low-priced three" marques in the American market...





My favorite - my 2nd 1967 Plymouth GTX
67 Plymouth GTX - #'s matching 440, Auto, 8-3/4" Suregrip, buildsheet, fender tag, window sticker, motor has been redone with MP aluminum dual plane intake, Holley 800 carb, Ceramic coated headers, MP oil pump, PurpleShaft Cam, ported, balanced - about 450hp / 500lb ft. - those poor little redlines!





1969 Plymouth GTX For Sale
http://www.ClassicCarBuyingSecrets.com Click now for an instant download on "How to Avoid the 7 Deadliest Mistakes of Buying a Classic Car Online"! To see 100 pictures of this car, visit: http://www.vanguardmotorsales.com/Inventory/DetailsPage/tabid/126/company/V ANGUARDAUTOS/vin/RS23L9G151447/Default.aspx VIN RS23L9G151447 This beautiful Mopar features all original steel! When the previous owner started the restoration, the car was taken down to bare metal. The car was painted in 2012. The restoration was recently completed. The previous owner sold the car because his father had become ill and he didn't have time for it anymore. The original build sheet and shoulder belts and hardware are included in the sale. This was originally a 440 car, but does not have the original motor. Mechanics 440ci Engine, Bored and Stoked to 496ci/650hp 727 Automatic Transmission 489 Case Sure Grip Rear End with 4:10 Gear Ratio Holley Carb, Dual Feed and Electric Choke Powder Coated Performer RPM Dual Plane Intake Edelbrock RPM Heads Chrome Power Steering Pump Manual Drum Brakes, New Brake Lines Parking Brake New Exhaust System and Exhaust Tips Jet Coated Headers Billet Aluminum Pulleys Mopar Performance Valve Covers Powder Coated Water Pump Chrome Air Cleaner Mopar Performance Valve Covers Polished Alternator MSD Distributor Custom Aluminum Radiator Custom Fan Shroud New Springs and Shocks Rebuilt Front Suspension New Bushings Brand New Gas Tank with New Straps Body Beautiful Blue Paint, Done about 2 Years Ago Standard Black Lower Body Side Paint All Original Metal Gorgeous Chrome Bumpers Grille is Beautiful Stainless Trim and Emblems are in Great Shape Gorgeous Straight Body Doors Fit and Operate Properly Door Jambs and Lips are Solid and Clean Solid Trunk is Beautifully Painted Brand New Trunk Mat Undercarriage was Sand Blasted and Painted Body Color Frame is Beautifully Painted and Very Clean Rockers are Solid and Clean Wheel Wells are Painted Body Color Beautiful Magnum Wheels Great Looking Front Tires -- 225/70/15 Mickey Thompson Rear Tires - 275/60/15 Interior Beautiful Blue Interior Bucket Seats Console with Shifter Wood Grain Details on Console, Dash and Door Panels Aftermarket Gauges Under the Dash Dash Pad is in Great Shape Seatbelts Front and Back Great Looking Steering Wheel Interior Lights Work Beautiful Headliner Nice Looking Carpet Wipers Work Blower Works Radio Inoperable Don't Miss Out! Call Tom 7 Days a Week, Including Holidays! 248-974-9513 tom@vanguardmotorsales.com www.VanguardMotorSales.com





1967 Plymouth GTX STK # 1075.mov
1967 Plymouth GTX with a 440ci big block V8 need anyone say more? This gorgeous GTX has a fully rebuilt 440ci V8 has a mild cam with only 300 miles on the rebuild. Putting the power to the ground is an automatic transmission with stock rear end and rear gear set. This KK1 Turquoise beauty can cruise down the road or leave long black rubber strips which ever you prefer. Optioned with seatbelts, AM radio, red line tires, power brakes, power steering and vinyl interior. For more details on this vehicle or to inquire about financing please call us at 704-598-2130 or e-mail sales@streetsideclassics.com.





1967 Plymouth Hemi Satellite plus much more
The Backing Up Classics Museum in Concord, North Carolina has this car on display and many more. Take an up close look at this '67 Hemi Satellite plus a dozen more cars. Music by the Surfonics. www.vintagevehicletv.com





1967 Plymouth GTX Belvedere STK # 1017
New for 1967 was the "gentlemen's" muscle car, the Plymouth Belvedere GTX. This fine example features a #'s matching 440 V8 that produces 375 HP and 490 ft/lbs of torque. It's backed by the original four speed transmission making this a true muscle car in every sense of the word. This gorgeous GTX is optioned just like it would have been from the factory right down to the ZZ-1Gold paint and black vinyl interior. Comes documented with an original build sheet that's in good condition and adds value to the car. You have to love the sharp body lines on the '67 GTXs, these are some of best looking muscle cars from the entire era. For more details please e-mail us at sales@streetsideclassics.com or give us a call at 704-598-2130.





1967 Plymouth GTX
1967 Plymouth GTX. Very nice car. Older paint, but still nice. Interior very clean. Original 4 speed car with 440 High Performance V8. Engine is stamped with 1967 build date, but we are not sure if this is the original motor. Dana rear axle. We have driven this car many miles and it drives very nice.





A Long Neglected 67 Satellite 4spd Needs a Little Free Love
This diamond in the rough 1967 plymouth Satellite sits in her original owner's yard. After a stint at racing with a 440, the owner returned the 383 with headers and parked her for years - but she starts-up and craves asphalt! The body, tranny & interior are 100% original and complete, all tinted class is intact and not cloudy, manual steering & brakes rounds-out the power package. I would never canabalize such a rarity, but I do envy the 4spd that would drop in my Black Fury - some day I will find one. The owner has my number, but will not give out his. He is debating whether or not his price of $6500 is enough to annul his 40 year vehicular marriage. I have a feeling a fair amount of cash would sway his separation and let this B body machine tear-up RTE 66 once again.





1959 Plymouth Sport Fury - Test Drive & Review
Since I am into more things than just RC I thought this might be a great way to expand the channel a little. I have been wanting to do a review and drive of a long time member of the family. This is the old man's 1959 Plymouth he has had.. well basically since 1959. I hope you enjoy seeing this "old bomb" as he calls it. Vehicle Highlights: Fury V-800 Super-Pak V8; 318ci - 260hp / 345tq. Torqueflite automatic trans 2.93:1 Axle ratio. 2dr Hard-Top. Non-restored survivor. Music: Provided by Kevin MacLeod (incompetech.com)





1971 Plymouth Scamp $31,900.00
Clean North Carolina car, over $50,000.00 invested in complete restoration, beautiful Desert Gold metallic paint, black vinyl interior, black striping, Balanced & Blue printed 360 stroked to 409 ci engine, 23 spline Pistol Grip 4 speed manual transmission, Demon 750 4 bbl, Hi-Rise aluminum intake, roller rockers, Edelborck Performer RPM aluminum heads, ceramic headers, electronic ignition, Edelbrock breather & valve covers, Wilwood power 4 wheel disc brakes with front slotted & drilled rotors, Vintage air conditioning, buckets seats, Hurst Pistol Grip shifter, Grant steering wheel, carbon fiber dash with Autometer tach & gauge cluster, Sony am-fm-cd, Flowmaster dual Exhaust with chrome tips, 9" Ford rear end with 3.70 Sure Grip, 4 link rear suspension with adjustable coil-overs, 275/45R20 rear tires, 215/45R17 fronts, 17 & 20" Foose wheels, 15 gallon fuel cell with electric pump, hood scoop, Mopar Muscle!





134120 / 1972 Plymouth Satellite
For more information on this vehicle visit http://tinyurl.com/bn6xgd2 The product of a high dollar, multi-year build, this incredible Mopar pro-tourer wraps a 500 horsepower 3G Hemi and a completely custom suspension in a custom leather interior and killer custom-mixed paint. Completed in early 2012, this super clean curve carver is the direct result of what happens when a seasoned fabricator has an uncompromised vision, major dedication and access to a six-figure bank account. See, the car's creator already owned a killer Charger that was buff enough to pull down sub 10-second passes on an NHRA-sanctioned drag strip, so he wanted to build a second car that was a bit milder and quite different. Enter this neon Plymouth, a project which quickly escalated from the restoration of a fun cruiser into the creation of an outrageous driver's car. Hoist this Plymouth's bright fiberglass hood and you'll find 6.1 liters of naturally aspirated 3G Hemi bliss. Straight from the factory that popular SRT8 powerplant produces an impressive 425 horsepower and 420 lb./ft. of torque. And with the help of a custom tune by the folks at Bouchillon Performance Engineering in Hanahan, South Carolina, its performance transforms from wild to flat out wicked! Measuring in at roughly 372 cubic inches, the big mill uses a revised block, forged internals, lighter pistons and a cast aluminum intake to crank out a whopping 500 horsepower and 460 lb./ft. of torque. And best of all, that's 500 horsepower that'll fire up in any weather, last thousands of maintenance-free miles, and probably lay waste to any old school muscle car that's brave enough to stage a challenge! Behind the neo Hemi, a Hughes Performance A727 Torqueflite produces great bite and hard launches. Out back, there's a fresh Moser Sure Grip rear end that's equipped with moderate, pavement pounding gears. At the front of the car, custom-mounted rack and pinion steering provides smooth turns and quick reflexes. That rack is held off the ground by a first class double A-arm suspension that's a product of Magnumforce upper control arms, two inch drip spindles, fresh Aldan coil overs and modified Mancini lower control arms. Holding the car's rear end off the ground is a Reilly Motorsports triangulated four link set up that's equipped with new QA-1 coil over shocks. And at the corners of the chassis, custom Boze Alloy wheels spin 235/55R18 front and 305/45R20 rear Yokohama Advan STs around graphite gray spokes, satin-finished lips and yellow-trimmed center caps. Open this B-Body's solid closing doors and take in its custom black interior that, as an astute combination of serious hardware and modern aesthetics, is the perfect place to spend jaunts like Hot Rod's famed Power Tour. The first thing you'll notice is a pair of GS-1 touring buckets, fitted with high quality RCI harnesses, that are so supportive they'll have no problem living life 100 miles at a time. Between those seats, a custom console anchors a B&M Pro Bandit shifter between two cup holders and a remote controlled Sony CD player. At the front of that console, a clean Just Dashes dash features snazzy white-faced gauges and a modern pushbutton ignition switch. And in front of the driver, a three-spoke Momo steering wheel spins a thick black rim around a shaved steering column. Brutally fast and visually stunning, this awesome Plymouth perfectly embodies the tried and true philosophy of pushing the envelope as far as the arc will go. Call, click or visit http://RKMotorsCharlotte.com for more information!





71 Plymouth GTX Startup
1971 Plymouth GTX that I've been working on getting back on the road. We got it as a "almost running" car. "Almost running" was somewhere between very generous and flat out false. We've ended up replacing all the bushings in the suspension and rebuilding the engine and the brakes. Now it's getting to the point that it's driveable and hoo-boy is it a hoot. Always fun to do the no tag, no muffler shakedown run :) Here's some specs: 440cu (7.2L) V8 with 727 Torqeflite reverse manual valve body; 8 3/4 rear end with 3.91 gearset. All going out to a pair of 15x10 Centerline rims with BF Goodrich 295/50R15 tires. Still not sure if we're going to be putting in the 4-speed or keeping the brutal automatic. Such a fun car. My little camera can't capture the amount of noise this thing puts out. It currently is just running around an old set of 2.5" pipes with no mufflers that end somewhere under the rear seats. Can't get enough Mopar!





1971 Plymouth Satellite, Road Runner & GTX Sales Features - Chrysler Master Tech
1971 Plymouth Satellite, Road Runner & GTX Features Video from the Chrysler Master Technician Service Conference Training Series. Used as a training tool for dealer salesmen and a sales tool for potential customers. Mopar is a registered trademark of Chrysler Group LLC. Master Tech series training materials are the property of Chrysler Group LLC and are used with permission.





Plymouth Road Runner
A compliation of clips appropriately set to Aerosmith's Road Runner.





1967 Plymouth GTX
This is a short clip of my friends '67 GTX just after getting it running. (FHO) Tim Banning built 540" Hemi w/10-71 blower. Chassis work by Ed, Chris, and Dennis Michal.




Which car is faster? Which Car is Faster?





Similar 1/4 mile timeslips to browse:

1967 Plymouth GTX : 10.460 @ 122.630
Bob, Engine: 446, Tires: Hossier


1968 Plymouth GTX : 11.309 @ 122.050
Jake France, Engine: 500,


1968 Plymouth GTX : 12.530 @ 108.000
Jerry A. Wilson, Engine: 440 c.i., Tires: firestone 10


1970 Plymouth GTX : 13.620 @ 101.000
mario, Engine: 440, Tires: 275/60/15


 


©2014 DragTimes - Disclaimer