1986 third gen Trans Am turbocharged 5.3 LM7 LSx runs
Couple WOT runs in my 1986 trans. Setup is a 2005 5.3 stock bottom end,
317 heads, LS6 cam and valvesprings, LS6 intake manifold, and custom fabbed
turbo setup with a turbonetics 76mm ball bearing turebo. Currently
running 5 PSI but engine will take 12-14 PSI. Car has a T56 tranny with a
textralia clutch as well.
How to Turbo - Part 1
After buying a Euro car last episode, Marty discovers he has not yet found
his perfect vehicle... In this extended episode, we reveal what he got, and
show how to make it faster.
Wanna show the world that you fix your own shizzle? MCM stickers, ti shirts
and other mad shizuoika available here:
Official Site: http://www.mightycarmods.com
Music from the episode is available here:
http://www.mightycarmods.com/collections/music (Forced Induction by MOOG
was featured in this episode)
Also something to note around Mighty Car Mods: we are normal guys and are
not trained mechanics. We like to make interesting car mods and show you
how we've gone about it, but we can't promise that anything we show you
will work for your particular car, or that you won't harm yourself, someone
else, your car or your warranty doing it. Please be safe, be responsible
and unless you know what you're doing, do not fool around with very serious
machinery just because you've seen us make it look so easy. Talk to a
qualified mechanic if you are in any doubt.
World's Fastest Camaro - 1800rwhp
Twin turboCamaro built by LMR and owner
This car made 1800rwhp and ran 244mph in a standing mile. In October it
will try for a new standing mile world record. Watch the video and see how
much of a handful this car is to drive, Josh does a great job keeping the
car from crashing.
Check out http://www.hightechcorvette.com
Follow us on Facebook http://www.facebook.com/hightech.corvette
Spike 1986 LS1 swaped Camaro
A day at the Dyno for
calibration. April 30, 2011.
About the car (from my brother SpikeIROC) :
- The car is an 1986 Camaro IROC.
- Headlights are eBay cheapos that will soon be swapped for LED
- It put down 400 whp and 390 tq thu a T56 and a fabbed 9" rear end.
- Brakes are C6Z front and rear.
- I swapped hatch to get the cleaner look I was looking for.
- It was trailered to the Dyno because it was not tuned
and I was not willing to risk damaging my new engine.
- The car The wheels are Bonspeed Intense 5. They are now powdercoated
Some more information about my brother's car can be found here :
Stock 3rd Gen Camaros (170hp TBI vs 230hp TPI vs 245hp TPI)
Not all 3rd Gen models were created equal... they ranged in horsepower from 170hp on up
to 245hp. From the economy version 170hp L03 TBI 5.0 to the hot version
230hp LB9 5.0 TPI manual 5-speed model with G92 option and the 245hp L98
5.7 TPI with G92 option. This is just to open a few eyes out there on the
many different options and engines these cars had back in the late-'80s and
For more on these cars check out V8ponycars.com and Mustang-Town.com
Shot many years ago by John @ nedaCFilms
BEST of Start Up sounds!! More than 70 Exhaust Sounds!
To celebrate my 600th video, I have made this compilation: probably all the
start up sounds from supercars I've recorded in the past years. It's the
largest start-up sound compilation on YouTube right now! I have put them
together in one video with more than 70 start up sounds!
What's you favorite start up sound? Let me know by leaving a comment
1st Channel: http://www.YouTube.com/GUMBAL
2nd Channel: http://www.YouTube.com/GUMBALTV
3rd Channel: http://www.YouTube.com/CarChannelClassic
Thanks you for watching my videos. All feedback on my videos are
appreciated! Don't forget to like the video and subscribe to my channel.
More videos coming up!
3rd Gen Camaro Build
A (lotta) work in progress. I started this project to swap a 191cubic inch
V6 to a 350 V8 (along with performance parts, and swapping & upgrading the
transmission) in 2009. (see modifications list below.) These are pictures
and videos as I progressed and the very first engine start and test drive.
I applied primer to protect the metal as I knew I would have to put the
project on hold, which is where it has been since. Plan to start again by
gutting & redoing the interior here in 2012.
350 block swap
moddified Vortec heads
CompCams XE268 cam
Edelbrock Performer RPM Vortec intake
Edelbrock 750cfm AVS carb
Headman 1 5/8 headers
- .500" line pressure Boost valve
- huge servos
- servo release check valve
- TCI throttle valve
- TCI Breakaway 2400 stall converter (lockup)
- B&M ratchet shifter, front oil cooler, TrickShift oil.